Eizo RediForce MS236WT-A User manual

Instructions for Use
Color LCD Monitor with Touch Panel
Important
Please make sure you read the Instructions for Use and Installation
Manual before use.
Please retain this manual for future reference.
• See the Installation Manual for monitor settings and adjustments.
• The latest product information, including the Instructions for Use, is
available on our web site.
www.eizoglobal.com

2
SAFETY SYMBOLS
This manual and this product use the safety symbols below. They denote critical
information. Please read them carefully.
WARNING
Failure to abide by the information in a WARNING may result in serious injury
and can be life threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate injury
and/or property or product damage.
Indicates a warning or caution. For example, indicates an "electrical
shock" hazard.
Indicates a prohibited action. For example, means "Do not disassemble".
This product has been adjusted specifically for use in the region to which it was originally
shipped.
If operated outside this region, the product may not perform as stated in the specifications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, or otherwise, without the prior written
permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information
confidential unless prior arrangements are made pursuant to EIZO Corporation’s receipt of
said information. Although every effort has been made to ensure that this manual provides
up-to-date information, please note that EIZO product specifications are subject to change
without notice.

PRECAUTIONS
3
PRECAUTIONS
Important
This product has been adjusted specifically for use in the region to which it was originally
shipped. If operated outside this region, the product may not perform as stated in the
specifications.
To personal safety and proper maintenance, please read carefully the "PRECAUTIONS"
section and the caution statements on the monitor.
Location of Caution Statement
Symbols on the unit
Symbol This symbol indicates
Main power switch: Press to turn the monitor’s main power off.
Main power switch: Press to turn the monitor’s main power on.
Power button: Press to turn the monitor’s power on or off.
Alternating current
Alerting electrical shock hazard
CAUTION: See SAFETY SYMBOLS [}2]
WEEE marking: Product must be disposed of separately; materials may be
recycled.
CE marking: EU conformity mark in accordance with the provisions of Council
Directive and/or Regulation (EU).
Manufacturer
Date of manufacture
Caution: Federal law (USA) restricts this device to sale by or on the order of a
licensed healthcare practitioner.
Medical device in the EU
Importer in the EU

PRECAUTIONS
4
Symbol This symbol indicates
Mark signifying compliance with UK regulations
UK Responsible Person
Authorised representative in Switzerland

PRECAUTIONS
5
WARNING
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes strange noises,
disconnect all power connections immediately and contact your EIZO representative for
advice.
Attempting to use a malfunctioning unit may result in fire, electrical shock, or equipment damage.
WARNING
Do not disassemble or modify the unit.
Opening the cabinet may result in electrical shock or burn by high-voltage or high-
temperature parts. Modifying the unit may result in fire or electrical shock.
WARNING
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers may result in fire,
electrical shock, or equipment damage.
WARNING
Keep foreign objects or liquids away from the unit.
Metal parts, flammable materials, or liquids accidentally falling into the cabinet may
result in fire, electrical shock, or equipment damage.
If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the
unit checked by a qualified service engineer before using it again.
WARNING
Place the unit at a sturdy and stable place.
A unit placed on an inadequate surface may fall and result in injury.
If the unit falls, disconnect the power immediately and ask your local EIZO representative for advice.
Do not continue using a damaged unit. Using a damaged unit may result in fire or electrical shock.

PRECAUTIONS
6
WARNING
Use the unit in an appropriate location.
Otherwise, fire, electrical shock, or equipment damage may result.
• Do not place outdoors.
• Do not place in any form of transportation (ships, aircraft, trains, automobiles, etc.).
• Do not place in dusty or humid environments.
• Do not place in locations where water may be splashed on the screen (bathrooms,
kitchens, etc.)
• Do not place in locations where steam comes in direct contact with the screen.
• Do not place near heat generating devices or humidifiers.
• Do not place in locations where the product is subject to direct sunlight.
• Do not place in environments with inflammable gas.
• Do not place in environments with corrosive gases (such as sulfur dioxide,
hydrogen sulfide, nitrogen dioxide, chlorine, ammonia, and ozone).
• Do not place in environments with dust, components that accelerate corrosion in
the atmosphere (such as sodium chloride and sulfur), conductive metals, and so
on.
WARNING
Keep the plastic packing bags away from babies and children.
The plastic packing bags may cause suffocation.
WARNING
Use the enclosed power cord and connect to the standard power outlet in your country.
Be sure to use within the rated voltage of the power cord. Otherwise, fire or electric shock may
result.
Power supply: 100-240 Vac 50/60 Hz
WARNING
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electrical shock.
WARNING
The equipment must be connected to a grounded main outlet.
Failure to do so may result in fire or electric shock.

PRECAUTIONS
7
WARNING
Use the correct voltage.
• The unit is designed for use with a specific voltage only. Connection to another voltage than
specified in this "Instructions for Use" may cause fire, electric shock, or equipment damage.
Power supply: 100-240 Vac 50/60 Hz
• Do not overload your power circuit, as this may result in fire or electric shock.
WARNING
Handle the power cord with care.
Do not place heavy objects on the power cord, or pull or tie the power cord. Using a
damaged power cord may result in fire or electrical shock.
WARNING
The operator should not touch the patient while touching the product.
This product has not been designed to be touched by patients.
WARNING
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electrical shock.
WARNING
When attaching an arm stand, please refer to the User’s Manual of the arm stand and install
the unit securely.
Otherwise, the unit may become detached, resulting in injury and/or equipment damage.
Before installation, make sure that desks, walls, or any other installation surface has adequate
mechanical strength.
If the unit falls, disconnect the power immediately and ask your local EIZO representative for advice.
Do not continue using a damaged unit. Using a damaged unit may result in fire or electrical shock.
When reattaching the tilt stand, please use the same screws and tighten them securely.
WARNING
Do not touch a damaged LCD panel directly with bare hands.
If any part of your skin comes in direct contact with the panel, wash thoroughly.
If liquid crystal enters your eyes or mouth, immediately flush with large amounts of
water and seek medical attention. Otherwise, you may have a toxic reaction.
WARNING
For installment in high locations, ask for the help of a professional.
When installing the monitor in a high location, there is a risk of the product or its parts falling and
causing injury. Ask for help from us or from a professional who specializes in construction work
when installing the monitor, including an inspection of the product for any damage or deformities
both before and after installing the monitor.

PRECAUTIONS
8
CAUTION
CAUTION
Check the operational state before use.
Begin use after ensuring that there are no problems with the displayed image.
When using multiple units, begin use after ensuring that the images are displayed appropriately.
CAUTION
Securely fix cables / cords that have a fixing feature.
If they are not fixed securely, cables / cords may disconnect, and subsequently images may be cut
off and your operations may be disrupted.
CAUTION
Disconnect cables and remove accessories when moving the unit.
Otherwise, the cables or accessories may become detached when moving, resulting in injury.
CAUTION
Carry or place the unit according to the correct specified methods.
• When moving the product, hold the bottom of the monitor firmly.
• Monitors of size 30 inches and above are heavy. When unpacking and/or carrying
the monitor, ensure at least two people are utilized.
• If your device model has a handle on the back of the monitor, grasp and firmly hold
the bottom and handle of the monitor.
Dropping the unit may result in injury or equipment damage.
CAUTION
Exercise care not to pinch your hands.
If you suddenly apply force to the monitor to adjust its height or angle, your hands may be pinched
and injured.
CAUTION
Do not block the ventilation slots on the cabinet.
• Do not place any objects on the ventilation slots.
• Do not install the unit in a place with poor ventilation or inadequate space.
• Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire, electrical
shock, or equipment damage.

PRECAUTIONS
9
CAUTION
Do not touch the power plug with wet hands.
Touching them may result in electrical shock.
CAUTION
Do not place any objects around the power plug.
This is to facilitate disconnecting the power plug in case of a problem to avoid fire or
electrical shock.
CAUTION
Periodically clean the area around the power plug and the ventilation slot of the monitor.
Dust, water, or oil adhered to this area may result in fire.
CAUTION
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electrical shock.
CAUTION
If you plan to leave the unit unused for an extended period of time, disconnect the power
plug from the wall socket after turning off the power switch for the safety and the power
saving.
CAUTION
Dispose of this product in accordance with the laws of the locality or country of residence.
CAUTION
For users in the territory of the EEA and Switzerland:
Any serious incident that has occurred in relation to the device should be reported to the
Manufacturer and the Competent Authority of the Member State in which the user and/or
patient is established.

Notice for this monitor
10
Notice for this monitor
Indications for Use
This product is suited to clinical review. It does not support the display of mammography
images for diagnosis.
Attention
• This product should be set to landscape mode when used for the above purpose.
• This product may not be covered by warranty for uses other than those described in this manual.
• The specifications noted in this manual are only applicable when using the power cords provided
together with the product and EIZO-specified signal cables.
• Only use EIZO accessories products specified by EIZO with this product.
Precautions for Use
• Parts (such as the LCD panel and the fan) may deteriorate if used over extended
periods of time. Periodically check that they are operating normally.
• When the screen image is changed after displaying the same image for extended
periods of time, an afterimage may appear. Use the screensaver or power save function
to avoid displaying the same image for extended periods of time. Depending on the
image, an afterimage may appear even if it was displayed for a short period of time. To
remove such a phenomenon, change the image or keep the power turned off for several
hours.
• It takes about 30 minutes for the monitor display to stabilize. Please wait 30 minutes or
more after the monitor power has been turned on or the monitor has recovered from
power saving mode before making adjustments to it.
• If the monitor displays continuously over a long period of time, smudges or burn-in may
appear. To maximize the life of the monitor, we recommend the monitor be turned off
periodically.
• The backlight of the LCD panel has a fixed lifetime. Depending on the usage pattern,
such as usage for long continuous periods, the lifespan of the backlight may run out
sooner, requiring replacement. When the screen becomes dark or begins to flicker,
please contact your local EIZO representative.
• The screen may have defective pixels or a small number of light dots on the screen.
This is due to the characteristics of the LCD panel itself, and is not a malfunction of the
product.
• Do not scratch or press on the LCD panel with any sharp objects, at this may result in
damage to the LCD panel. Do not attempt to brush with tissues as this may scratch the
panel.
• Dew condensation may form on the surface or interior of this product when it is brought
into a cold room, when the temperature suddenly rises, or when it is moved from a cold
room to a warm room. In that case, do not turn the product on. Instead wait until the dew
condensation disappears, otherwise it may cause some damage to the product.
• (Cautions for the Use of the Touch Panel)
During touch operation
Be careful of the following points. Otherwise, damage may occur to the monitor.
– Do not strongly press, scratch, or poke the touch panel.
– Do not touch the touch panel with hard objects such as ballpoint pens or metals.

Notice for this monitor
11
To Use the Monitor for a Long Time
Cleaning
• Periodic cleaning is recommended to keep the product looking new and to prolong its
operation lifetime.
• The stains on the cabinet and LCD panel surface can be removed by using the provided
cleaning cloth.
Chemicals that may be used for cleaning
Material name Product name
Ethanol Ethanol
Isopropyl alcohol Isopropyl alcohol
Chlorhexidine gluconate Hibitane solution
Sodium hypochlorite Purelox
Benzalkonium chloride Welpas
Glutaral Sterihyde
Glutaral Cidex Plus28
Alkyldiaminoethylglycine hydrochloride Satenidin solution
Attention
• Do not allow liquid to enter the clearance between the touch panel surface and the panel frame.
• Do not use chemicals on a frequent basis.
• Chemicals such as alcohol and disinfectant may cause gloss variation, tarnishing, and fading of
the cabinet or LCD panel surface, and also quality deterioration of the image.
• Never use thinner, benzene, wax, or abrasive cleaner as they may damage the cabinet or LCD
panel surface.
• Do not let chemicals come into direct contact with the monitor.
To Use the Monitor Comfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the
monitor according to the environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
• Look at the screen from a proper distance and from a proper angle.
Cybersecurity Warnings and Responsibilities
• Firmware update should be performed through EIZO Corporation or its distributor.
• If EIZO Corporation or its distributor instructs to update the firmware, update it
immediately.

CONTENTS
12
CONTENTS
PRECAUTIONS ........................................................................................................... 3
Important............................................................................................................. 3
Location of Caution Statement................................................................ 3
Symbols on the unit ................................................................................ 3
Notice for this monitor............................................................................................... 10
Indications for Use .............................................................................................. 10
Precautions for Use............................................................................................. 10
To Use the Monitor for a Long Time ................................................................... 11
Cleaning.................................................................................................. 11
To Use the Monitor Comfortably ......................................................................... 11
Cybersecurity Warnings and Responsibilities..................................................... 11
1 Introduction ................................................................................................................ 14
1.1 Features.............................................................................................................. 14
1.1.1 Full-Flat Design....................................................................................... 14
1.1.2 Easy-to-touch Stand Mechanism............................................................ 14
1.1.3 10-point Multi-touch Support................................................................... 14
1.2 Package Contents............................................................................................... 15
1.2.1 Contents Included in the EIZO LCD Utility Disk...................................... 15
1.3 Controls and Functions ....................................................................................... 16
1.3.1 Front........................................................................................................ 16
1.3.2 Rear ........................................................................................................ 17
2 Installation / Connection............................................................................................ 18
2.1 Before installation................................................................................................ 18
2.1.1 Installation conditions.............................................................................. 18
2.2 Installing.............................................................................................................. 18
2.3 Connecting Cables.............................................................................................. 18
2.4 Turning On the Power......................................................................................... 20
2.5 Adjusting the Screen Angle................................................................................. 21
2.6 Mounting the Touch Pen Holder ......................................................................... 21
2.7 Touch Panel Setup.............................................................................................. 21
3 No-Picture Problem.................................................................................................... 23
4 Specifications............................................................................................................. 25
4.1 List of Specifications ........................................................................................... 25
4.1.1 LCD Panel............................................................................................... 25
4.1.2 Touch Panel............................................................................................ 25
4.1.3 Video Signals .......................................................................................... 25
4.1.4 USB......................................................................................................... 26

CONTENTS
13
4.1.5 Audio....................................................................................................... 26
4.1.6 Power...................................................................................................... 26
4.1.7 Physical Specifications ........................................................................... 26
4.1.8 Operating Environment Requirements.................................................... 26
4.1.9 Transport / Storage Conditions............................................................... 26
4.2 Compatible Resolutions ...................................................................................... 27
4.3 Accessories......................................................................................................... 27
Appendix..................................................................................................................... 28
Medical Standard ................................................................................................ 28
Classification of Equipment..................................................................... 28
EMC Information ................................................................................................. 29
Environments of Intended Use................................................................ 29
Technical Descriptions............................................................................ 30
Information for Radio Interference ...................................................................... 36
For U.S.A, Canada Only ......................................................................... 36
Declaration of compliance with India RoHS........................................................ 37

1 | Introduction
14
1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1.1 Features
1.1.1 Full-Flat Design
A full-flat design with a flat bezel is adopted. You can properly touch right to the edge of the
screen.
1.1.2 Easy-to-touch Stand Mechanism
The tilt angle can be adjusted steplessly. You can smoothly change the screen position to
make it easier to work in a way that suits how you are using the monitor, such as for office
work or multi-touch operations.
70°
15°
1.1.3 10-point Multi-touch Support
Multi-touch can be used to zoom in/out and rotate. The screen responds to light touches, so
flick and drag operations can be performed with ease.
Zooming in/out Rotating

Introduction | 1
15
1.2 Package Contents
Check that all of the following items are contained in the package. If any of these are
missing or damaged, contact your dealer or local EIZO representative listed on the attached
sheet.
Note
• It is recommended that the box and packing materials be stored so that they can be used to
move or transport this product.
• Monitor
• Power cord
• Digital signal cable (DisplayPort - DisplayPort): PP300 x 1
• HDMI cable (HDMI - HDMI) HH300PR x 1
• USB cable: UU300SS x 1
• EIZO LCD Utility Disk (CD-ROM)
• Instructions for Use
• Cleaning cloth x 1
• Touch pen x 1
• Touch pen holder x 1
• Touch pen holder mounting screw x 1
• Screw hole cover sheet x 2
• Tie band (push-in type) x 1
1.2.1 Contents Included in the EIZO LCD Utility Disk
The CD-ROM contains the following items. Refer to "Readme.txt" on the disk for software
startup procedures or file reference procedures.
• Readme.txt file
• Touch panel driver (DMT-DD)
• Touch panel sensitivity adjustment software (TPOffset)
• User’s Manuals
– Instructions for Use of this monitor
– Monitor Installation Manual
– User’s Manual of the touch panel driver
– User’s Manual of the touch panel sensitivity adjustment software
• Outline dimensions

1 | Introduction
16
1.3 Controls and Functions
1.3.1 Front
2
3
4
5
6
7
1
1. Power Indicator Indicates the monitor’s operation status.
Blue: Screen display
Orange: Power saving mode
Off: Main power / power off
2. button Enables/disables and adjusts the sensitivity of the touch panel.
3. button Switches the input signals to be displayed.
4. button*1 Selects items displayed in the Setting menu, adjusts or sets the
functions, and displays the brightness adjustment screen.
5. button*1 Selects items displayed in the Setting menu, adjusts or sets the
functions, and displays the volume adjustment screen.
6. button Displays the Setting menu, confirms the adjustment items of each
menu, and saves adjustment results.
7. button Turns the power on or off.
*1 In this manual, the button may be displayed as , and the button may be displayed
as .

Introduction | 1
17
1.3.2 Rear
1
2
3
4 6
75
8
9
10
11
12
13
1. Main power switch Turns the main power on or off.
｜: On, ○: Off
2. Power connector Connects the power cord.
3. Touch pen holder
mounting hole
For mounting the touch pen holder. (see Mounting the Touch Pen
Holder [}21])
4. Security lock slot Complies with Kensington’s MicroSaver security system.
5. Speakers Outputs audio.
6. Stand
(with cable holder)
Allows adjustment of the angle.
7. Tie band mounting hole Attach a tie band to prevent the HDMI cable from disconnecting.
8. Stereo mini jack By connecting an external device using a stereo mini jack cable,
external audio can be output from the monitor.
9. D-Sub15 pin (mini)
connector
Connects to a PC with D-Sub output.
10. HDMI connector Connects to a PC with HDMI output.
11. DisplayPort connector Connects to a PC with DisplayPort output.
12. USB-A connector
(downstream)
Connects to a peripheral USB device.
13. USB-B connector
(upstream)
Connects to a USB cable if using the monitor as a touch panel
monitor, or if using the USB hub function.

2 | Installation / Connection
18
2 Installation / Connection
2.1 Before installation
Carefully read PRECAUTIONS [}3] and always follow the instructions.
If you place this product on a lacquer-coated desk, the color may adhere to the bottom of
the stand due to the composition of the rubber. Check the desk surface before use.
2.1.1 Installation conditions
When installing the monitor in a rack, ensure that there is adequate space around the sides,
back and top of the monitor.
Attention
• Position the monitor so that there is no light to interfere with the screen.
2.2 Installing
Place a soft cloth or similar material on a stable desk, and open the stand until it makes a
clicking sound.
Attention
• Do not use the monitor while it is in its packaging.
While packaged, the stand is closed, so there is a risk of the monitor falling over.
2.3 Connecting Cables
Attention
• Check that the monitor, PC, and peripherals are powered off before connecting.
• When replacing the current monitor with this monitor, see Compatible Resolutions [}27] to
change the PC settings for resolution and vertical scan frequency to those that are available for
this monitor, before connecting the PC.

Installation / Connection | 2
19
1. Connect signal cables.
Check the shapes of the connectors, and connect the cables. When connecting an
HDMI cable, fasten the cable with the supplied cable tie. When connecting a D-Sub mini
15-pin cable, tighten the fasteners down to secure the connector.
Connect the USB cable when using the monitor as a touch panel monitor. Connecting it
will enable the USB hub function.
The stereo mini jack cable is for when you want to get audio from the monitor speakers
when the D-Sub mini 15-pin cable has been used for connection.
Stereo mini jack cable
(Commercially available product)
D-Sub 15 pin (mini) cable
V55 / MD-C87
(Sold separately)
or
HDMI cable (included)
or
DisplayPort cable (included)
USB cable (included)
Audio output
D-Sub 15 pin (mini)
HDMI
DisplayPort
USB
Attention
• When connecting to multiple PCs, switch the input signal. For details, refer to the Installation
Manual (on the CD-ROM).
Note
• If the cables are difficult to insert, adjust the angle of the screen.

2 | Installation / Connection
20
2. Plug the power cord into a power outlet and the power connector on the monitor.
Insert the power cord fully into the monitor.
2.4 Turning On the Power
1. Check if the main power switch is on.
2. Press to turn on the power to the monitor.
The power switch indicator of the monitor lights up blue.
If the indicator does not light up, see No-Picture Problem [}23].
3. Turn on the PC.
The screen image appears.
If an image does not appear, see No-Picture Problem [}23] for additional advice.
Attention
• Depending on the PC settings, the display may not show correctly, or not be at the appropriate
scale. Check the settings for the PC if required.
• For the maximum power saving, it is recommended that the Power button be turned off. When
not using the monitor, you can turn off the main power supply or disconnect the power plug so
that the power is cut completely.
Note
• In order to maximize the monitor's lifespan by impeding brightness degradation and to reduce
power consumption, carry out the following:
– Use the power saving function of the PC or monitor.
– Turn off the monitor after using it.