EK WMF Series User manual

WMF SERIES WALL MOUNTED CABINET
ASSEMBLY INSTRUCTIONS
Component list:
1. Top cover
2. Bottom plate
3. Left & right frame
4. Vertical rails
5. Horizontal beams
1pc
1pc
2pcs
4pcs
4pcs
6. Front door
7. Side doors
8. Rear panel
9. Mounting bracket
1pc
2pcs
1pc
1pc
Hardware list:
Assembly screws
a. M6x12 pan head screws 24pcs
b. M3.5x6 pan head screws 40pcs
a
b
c. M6 cage nuts 8pcs
d. M6 flange nuts 16pcs
c
d
ASSEMBLY STEPS:
Finished
4pcs vertical rails
Left & right frame
4pcs horizontal beams
Cabinet frame
1
2
3
4
7
6
5
9
8
Top cover
Cable entry
Mounting bracket
Rear panel
Bottom plate
2pcs Side panels
Front door
1. Use 8sets M6x12 pan head screws & cage nuts
to fix 4pcs vertical rails on the left & right frame.
2. Connect 4pcs horizontal beams and the
left & right frame by 32pcs M3.5x6 screws.
3. Connect the top cover & bottom plate with
the cabinet frame by 16sets M6x12 pan head
screws and flange nuts.
4. Assembly the rear panel & mounting
brackets by 8pcs M3.5x6 screws.
5. Install 2pcs side panels and the front foor.

WMF SERIES WALL MOUNTED CABINET
Mounting method
Step 1:
Fix the mounting bracket on
the wall by 4pcs anchor bolts.
Step 2:
Hang the cabinet’s 2 mounting
notches onto the 2 mounting
hooks on the
plate attached to the
wall.