Elbro AG SMSB482 User manual

QUICK REFERENCE SMSB482
Installation
1. Disable PIN CODE from SIM CARD
2. Insert SIM CARD into device (see image)
3. See the next page (Sample Electrical Connection)
Software installation
1. Turn the device OFF.
2. Press and hold the button (▲) and connect USB cable
(without the power supply) to the PC.
3. Be sure that a USB mass storage on "Resource Manager" will
appear on your PC.
4. Open "Resource Manager" and open the folder of device
"SMSB482" ; then double click on "Setup.exe".
5. Disconnect USB cable when finished.
You can find the complete user’s guide in Micro-SD Card and also
In the SMSB482 software (click “Help”)
Programming SMSB482
1. Turn the device ON wit power supply.
2. Connect USB cable to the PC
3. Open SMSB482 Software
4. Insert users (phone numbers and names)
5. Set your functions
SMSB482
MoTuWeThFrSaSu
IN8IN4
GSM
GPRS
IN1 IN2 IN3 IN5 IN6 IN7
RE1 RE2 RE3 RE4
AN1 AN2
SMSB482
MoTuWeThFrSaSu
IN8IN4
GSM
GPRS
IN1 IN2 IN3 IN5 IN6 IN7
RE1 RE2 RE3 RE4
AN1 AN2
SIM

Analog Inputs
0..10V +24V GND S1 S2
SMSB482
AN1/AN2
ON
1 2 3 4
probe
AN ALOG INPUTS
transmitter
0..10V ON
1 2 3 4
LOOP S1 S2
SMSB482
AN1/AN2
probe
AN ALOG INPUTS
transmitter
0..20mA
LOOP
-+
ON
1 2 3 4
SMSB482
AN1/AN2
probe
AN ALOG INPUTS
PT100
probe
ON
1 2 3 4
SMSB482
AN1/AN2
AN ALOG INPUTS
PT1000
ON
1 2 3 4
ON
1 2 3 4
AN2 AN1