Elecom EHA-PA01 Series Installation guide

1 Preparations before use
•Installing a battery
•Attaching the earbud
Open the battery cover.
Insert one AAA battery (sold
separately) and close the
battery cover.
Attach the earbud to the
earphone.
EHA-PA01 Series
Quick manual
This manual briey describes the procedures before use.
Indentation Open
A lm for
easy battery removal
Positive (+) side
Negative (-) side
3 What do you do when:
2 How to use
Adjust the volume in 1.
Set the power switch to the
<N> position.
Place the earphone in your
ear.
Adjust the volume
Makes a beep-beep tone.
Set the load switch to the <LO> position.
Set the power switch to the <H> position.
The noise control circuit will be activated.
Turn the power switch to
the < > (OFF) position.
• Turning the power on
•Adjusting the volume
When wearing it
in the right ear
When wearing it
in the left ear
Insert the earbud deeper so that it sits rmly inside the ear canal.
Switch to a different size earbud.
Be sure to insert the earbud in the
direction indicated by the arrow
Background noise is too loud to hear conversations.
Impact noises, such as doors
shutting, become annoying.
You have nished
All manuals and user guides at all-guides.com

1 使用前的准备 ・装进电池
・装上耳塞
打开电池盖。
装进 1 节 7 号干电池（另售），
装回电池盖。
将耳塞装在耳机上。
EHA-PA01 系列
简易手册
本手册简要介绍了使用的流程。
凹槽 打开
●装配耳塞时，请朝箭头方向插入。
用于取出电池的薄膜
正极
负极
3
遇到这种情况时怎么办？ 用完后�
2 使用方法
将音量设为 1。
将电源开关置于〈N〉。
将耳机戴上耳朵。
调节音量。
■ 发出“哔哔”声时
■ 因关门等冲击音而感到不舒服时
请将输出限制开关置于〈LO〉。
■ 周围噪声大，听不清会话时
将电源开关置于〈H〉。
噪声抑制回路工作。
■ 用完后�
将电源开关置于〈切〉（关）。
・接通电源开关
・调节音量
戴在
右耳上时
戴在
左耳上时
请将耳塞确实插到耳朵根部。
请更换其他尺寸的耳塞。
体贴的助听器
All manuals and user guides at all-guides.com