Electro-Voice Xlci Series Xlci-118 Instruction manual

XLCi (Install) Series Rigging
Assembly and
Installation Instructions
Step 1:
Assemble hardware to enclosure.
1. Install Finger Tight.
2. Torque all bolts to 70-90
in-lbs. (84-108 cm-kg
after completing array
assembly.
Step 2:
Assemble cabinet to array.
12000 Portland Avenue South, Burnsville, MN 55337
Phone:[phone], Fax:[phone]
www.electrovoice.com
©Telex Communications,Inc. 3/2003
Part Number 38110-223 Rev A
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: [phone]
Europe,Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Torque all bolts to 70-90 in-lbs.
(84-108 cm-kg
Use handles as
needed to assist in
cabinet positioning.
Choose hole according
to XLC LAPS software
program.
Split Washer
(x2 Split Washer
Nut
Split Washer
(x2
Washer