Electrolux DC6-14HP User manual

Installation manual
Drying Cabinet
DC6-14HP
Original instructions
427001217/EN
2022.03.18

Contents
Contents
1 Safety Precautions ..............................................................................................................................5
1.1 General safety information..........................................................................................................5
1.2 Symbols....................................................................................................................................5
2 Technical data.....................................................................................................................................6
2.1 Dimensions drawing...................................................................................................................6
2.2 Technical data ...........................................................................................................................7
3 Delivery ..............................................................................................................................................8
3.1 Transport unit ............................................................................................................................8
3.2 Box 1 ........................................................................................................................................9
3.3 Recommended tools ..................................................................................................................9
3.4 Placement...............................................................................................................................10
3.5 Ventilating the room .................................................................................................................10
4 Assembly instructions........................................................................................................................ 11
4.1 Bottom plate ............................................................................................................................ 11
4.2 Back piece ..............................................................................................................................12
4.3 Side pieces .............................................................................................................................13
4.4 Roof........................................................................................................................................13
4.5 Doors......................................................................................................................................14
4.6 Door adjustment ......................................................................................................................15
4.7 Wall bracket ............................................................................................................................16
4.8 Glove hanger...........................................................................................................................17
4.9 Lint filter ..................................................................................................................................18
4.10 Hanger assembly.....................................................................................................................19
4.11 Hanger installation ...................................................................................................................21
4.12 Installing the heat pump component on the cabinet.....................................................................22
4.13 Install the control panel.............................................................................................................23
5 Electrical connection..........................................................................................................................24
5.1 Network Functions ...................................................................................................................25
6 Condensation connection...................................................................................................................27
7 Function check..................................................................................................................................28
8 Disposal information..........................................................................................................................29
8.1 Disposal of appliance at end of life ............................................................................................29
8.2 Disposal of packing..................................................................................................................29
The manufacturer reserves the right to make changes to design and component specifications.

Installation manual 5
1 Safety Precautions
This appliance can be used in public areas.
Remove all objects from pockets such as lighters and matches.
WARNING. This appliance is intended only for drying textiles washed in water.
DO NOT MODIFY THIS APPLIANCE.
Servicing shall be carried out only by authorized personnel.
Only authorized spare parts shall be used.
When performing service or replacing parts, the power must be disconnected.
A-weighted emission sound pressure level at workstations: <70 dB
Additional requirements for the following countries: AT, BE, BG, HR, CY, CZ, DK, EE, FI,
FR, DE, GR, HU, IS, IE, IT, LV, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH, TR,
UK:
• This appliance can be used in public areas.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction con-
cerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children without supervision.
Additional requirements for other countries:
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental ca-
pabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do
not play with the appliance.
1.1 General safety information
Do not hose down the machine with water.
In order to prevent damage to the electronics (and other parts) that may occur as the result of condensation, the ma-
chine should be placed in room temperature for 24 hours before being used for the first time.
1.2 Symbols
Caution
Caution, hot surface
Read the instructions before using the machine.
Be careful. The drying cabinet is top heavy and can tip over easily.

6Installation manual
2 Technical data
2.1 Dimensions drawing
A
C
D
G
F
E
I
J
B
fig.W01309
A B C D E F G I J
mm 1805 800 1805 875 1560 900 2245 850 1180
Condensation outlet ⌀32 (see page 13)
Electrical connection (see page 12)

Installation manual 7
2.2 Technical data
Capacity: max. 10 kg of laundry
Drainage capacity: 80 g/min (10 kg 55% residual moisture)
Electrical connection: 400V 3N AC 50Hz
Fuse 10A slow-blow, 10A automatic fuse.
Power: 3.2 kW
Hanging length: 22 meters
Dimensions: Height 1805 mm
Width 2240 mm (including heat pump)
Depth 800 mm
Weight: 250 kg (for assembled cabinet)
Sound level: Airborne sound level at full load 68 dB (A)
Average heat emission per drying cycle used to assess
ventilation need*:
1.2 kW
* For assistance with dimensioning necessary ventilation needs, contact authorized ventilation technician. For suffi-
cient ventilation all sources introducing heat need to be taken into account plus all other parameters effecting the
ventilation need. Climate zone, building parameters, room size, etc.
This product contains fluorinated greenhouse gases. Hermetically sealed.
Type of refrigerant: R134a
Refrigerant quantity: 1.5 kg
Total factor for global warming potential: 1430
CO2equivalent: 2.145 tonnes
Leak test: 28 bar

8Installation manual
3 Delivery
The cabinet is delivered unassembled on a transport unit.
The cabinet component is assembled as instructed in this manual. After assembly, the heat pump component is
hooked onto the cabinet component. The heat pump component is fully assembled upon delivery.
The cabinet component and heat pump components are delivered in a single package.
3.1 Transport unit
The transport unit contains 5 boxes with the content described below.
1950
1040
1150
310 kg
fig.W01310
Box no. Contents
1 Small components, minor plate pieces, all documentation. See page 9
2 Bottom, Left Door, Left Back Plate, Right Back Plate
3 Right Door, Top, Right Side Plate, Left Side Plate
4 Interior Kit, Hangers, Filter KPL Contra 2000 Straight
5 Heat pump

Installation manual 9
3.2 Box 1
Box 1 contains 9 bags. The content of these is found in the installation instructions below.
1
1
x 9
fig.W01311
1 User Manual (OM) / Installation Manual (IM) / Assembly Instructions / Wiring Diagram / Disposal Instructions
3.3 Recommended tools
3
2
1
4 5
fig.W01312
1 Bits Torx, T10, T20, T25, T30. Allen key 4.0
2 Socket 10 mm and 13mm
3 Fixed wrench 7mm
4 Slotted screwdriver 0.5 x 3
5Slotted screwdriver 8 x 150
Other tools as illustrated.

10 Installation manual
3.4 Placement
The drying cabinet intended for placement indoors in dry place.
Place the bottom plate in the final position of the drying cabinet.
The drying cabinet should be positioned so that there is plenty of room for working, both for the user and service
personnel.
• First place the bottom plate (see page 11) in the intended position. The cabinet must stand level of a flat surface,
resting on all six feet.
• Adjust the adjustable feet with a slotted screwdriver. After adjustment, press cover plugs into the holes of the ad-
justable feet. See the next chapter.
3.5 Ventilating the room
When the machine is in operation, the room temperature increases. Due to this, the room must have sufficient
ventilation.
All sources introducing heat into the same room requires to be considered when dimensioning the ventilation. Heat
sources could for example be: more tumble dryers, drying cabinets, washers, ironers, radiators, etc. The combination
of several sources for heat introduction leads to an increased need for ventilation flow. Other factors may also influ-
ence the needed ventilation flow, such as climate zone, building parameters, room size, etc. For assistance with di-
mensioning necessary ventilation needs, contact authorized ventilation technician.

Installation manual 11
4 Assembly instructions
4.1 Bottom plate
2
3
6
1
5
6
7
8
1
2
3
4
fig.W01313
Box 1 Bag / Quantity
123456789
1 Cover plug 1x
2 M4x12 4x
3 End cap 1x
4 Cover plug 5x
5 Lock nut M4 2x
6 Magnetic holder 1x
7 Magnet 2x
8 Foot screw 6x

12 Installation manual
4.2 Back piece
1
1
fig.W01314
Box 1 Bag / Quantity
123456789
1 M6x10 11x

Installation manual 13
4.3 Side pieces
1
1
2
fig.W01315
Box 1 Bag / Quantity
123456789
1 M6x10 10x
2 M6x10 12x
4.4 Roof
1
2
1
2
1
3
fig.W01316
Box 1 Bag / Quantity
123456789
1 M6x10 16x
2 Cover 2x
3 RTK B8, 4.2x6.5 8x

14 Installation manual
4.5 Doors
2
3
1
1
2
4
fig.W01317
Box 1 Bag / Quantity
123456789
1 Lock nut 2x
2 Magnet 2x
3 M4x12 4x
4 Handle 1x

Installation manual 15
4.6 Door adjustment
1
I
II
III
IV
V
2
fig.W01318
Box 1 Bag / Quantity
123456789
1 Washer 7x12x1.5 6x

16 Installation manual
4.7 Wall bracket
1
4
1
2
3
2
fig.W01319
Box 1 Bag / Quantity
123456789
1 M6x16 4x
2 Lock washer 6.4x11x0.7 4x
3 Washer 16x6x1 4x
4 Wall bracket 4x

Installation manual 17
4.8 Glove hanger
8
34
2 3 1
fig.W01320
Box 1 Bag / Quantity
123456789
1 M5x14 4x
2 Plastic washer 5.3x15x1.2 4x
3 Washer 5x13x1 8x
4 Nylock M5 4x

18 Installation manual
4.9 Lint filter
1
4
9
2
3
fig.W01321
Box 1 Bag / Quantity
123456789
1 Screws 4x
2 Filter holder 1x
3 Lint filter 1x
The filter is held by 4 screws and a filter holder.

Installation manual 19
4.10 Hanger assembly
1
4
2 3
4
fig.W01322
Box 1 Bag / Quantity
123456789
1 Plastic washer 8x25x1.5 8x
2 Washer 8x25x1.5 8x
3 Lock nut M8 4x
4 M8x75 4x

20 Installation manual
1
2
3
4
fig.W01323
Box 1 Bag / Quantity
123456789
1 Metal screw 4.32x32 1x
2 Washer 4x10x1 1x
3 Door stop 1x