Electrolux T4290 User manual

Operating manual
T4290, T4530, T4650
Selecta Control
487 05 44 31.00
EN

Tumble dryer
Safety instructions
This machine is only intended for drying water-washed garments.
Clothes that have been cleaned with chemicals/flammable liquids, must NOT
be dried in the machine.
Remove clothes from the tumble dryer as soon as they are dry. This prevents
them from becoming creased, and reduces the risk of spontaneous ignition.
The machine must not be used for drying foam rubber or foam-like materials.
The machine must not be used for drying floor mops*.
The machine must not be used by minors.
The machine must not be hosed down with water.
Adequate ventilation has to be provided to avoid the back flow of gases into
the room from appliances burning other fuels, including open fires.
Mechanical, electrical and gas installations must only be carried out by
authorised personnel.
If the machine has a fault, this must be reported as soon as possible to the
person in charge. This is important for your own safety and for the safety of
others.
Gas dryers only:
The machine is not to be installed in rooms containing clean-
ing machines with perchloroethylene, TRICHLOROETHYLENE or
CHLOROFLUOROCONTAINING HYDROCARBONS as cleaning agents.
What to do if you smell gas:
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in your building.
Evacuate the room, building or area.
Contact the laundry manager.
* Applies only to floor mops containing polypropylene.
Emergency stop (T4530/4650)
If the machine for some reason
has to be stopped – press emer-
gency stop button.
When the necessary measures
have been taken, pull out the emer-
gency stop button. (The emergency
stop button is an option outside EU
and EEA).
3

Contents 5
Contents:
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Operating panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Instructions for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Programs AHL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Tumble dryer with manual operation - AHL. . . . . . . . . . . . . . . . . . . .11
Programs OPL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Tumble dryer with manual operation - OPL. . . . . . . . . . . . . . . . . . . .13
Programs - coin operated laundries . . . . . . . . . . . . . . . . . . . . . . . . .14
Tumble dryer with payment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
The manufacturer reserves the right to modify design and
material specifications without notice.
Textiles as silk and wool must not be overdried
to avoid the risk of creasing.

Glossary 7
Glossary
Auto Stop
The tumble dryer stops automatically when the clothes are dry.
AHL (Apartment House Laundry)
Example: Communal laundries / Housing block laundries.
OPL (On Premises Laundry)
Example: Institutional laundries.
RMC (Residual Moisture Control)
The tumble dryer has residual moisture control.

Operating panel
8
Operating panel
OPL - Tumble dryer with manual operation
AHL - Tumble dryer with manual operation
Coin-operated laundries
P
487 22 93 40.00
SELECTA CONTROL
487 22 93 41_00
P
4
8
7 22
93
4
0
.
00
SELECTA CONTROL
487 09 10 00.00
487 09 10 01.00
SELECTA CONTROL
487 22 93 41_00
487 09 11 01.00

Operating panel 9
Buttons and symbols
P
P button
Program selection button.
Not active on pay machines.
With RMC: Push button during
operation, display shows: the
residual moisture in the clothes.
Cool-down time
Setting of cool-down time.
OPL laundries only.
Heat
When lamp is lit the heat is on.
Time button
Setting of drying time.
Not active on pay machines.
Program status
“d xx” = Time controlled drying - xx indicates the time.
“c xx” = Time controlled cool-down - xx indicates the time.
“c - -” = Temperature controlled cool-down.
“ 00” = Standby. The dryer runs an anti-crease program for 120
minutes or until the door is opened.
Start/stop button
Start: Push button.
Stop: Push button or open
door.
Reversing
Reversing on/off.
OPL laundries only.
Selected temperature
Lamp is lit at selected tempe-
rature.
Temperature button
Temperature selection button.
Push button during operation,
display shows: the outlet tem-
perature.
Filter
When lamp is lit filter door / fil-
ter drawer is open.

Instructions for use
10
Programs P 01 - P 02
Program Process Textiles
P 01 Extra dry Denim
P 02 Ready to put away 100% cotton / poly cotton mixture / terry
Programs P 01 - P 03 on dryers with RMC
Program Process Textiles
P 01 Extra dry Denim
P 02 Ready to put away 100% cotton / poly cotton mixture / terry
P 03 Ironing dry 15% moisture All textiles
Temperatures
High Non-iron/normal wash Cotton and mixed fabrics
Medium Non-iron/normal wash Cotton and mixed fabrics
Low Fine wash/mild wash Delicate fabrics
No heat Airing bedspreads, duvets and bedclothes
Load
Full loads are recommended in order to achieve the best result.
Full load is indicated in kilos of dry textile.
Dryer type 4290 = 13,5 kg
Dryer type 4530 = 27 kg
Dryer type 4650 = 35 kg
Programs AHL

Instructions for use 11
1
1
2
2
3
3
4
4
5
5
6
6
Tumble dryer with manual operation - AHL
Fill garments
into the drum
Close the door
Clean filter
Wait for the dryer to
stop or press stop.
Restart
Close the door and press
start.
If the tumble dryer is not emptied
immediately after the drying time has
ended, an anti-crease programme is
automatically engaged.
This means that the drum rotates at
short intervals, thereby almost
completely avoiding creasing.
Press start The tumble dryer stops
Automatically when the clothes are
dry
or
when the selected time has expired.
Select programme
or
set the drying time
P 01 Extra dry
P 02 Ready to put away
P 03 Ironing dry (15% moisture)
Select
temperature
High
Medium
Low
No heat
To prevent
creasing:
Empty the tumble
dryer as soon as the
program has ended.
The last minutes
of the drying time
are the cool-down
period (cooling of
the clothes).

Instructions for use
12
Programs P 01 - P 09 on dryers with RMC
Program Process Textiles
P 01 Extra dry Denim
P 02 Ready to put away 100% cotton / poly cotton mixture / terry
P 03 Ironing dry (5% moisture) Polyester / nylon
P 04 Ironing dry (10% moisture) Wool / silk
P 05 Ironing dry (15% moisture) Viscose / acetate
P 06 Ironing dry (20% moisture) Mixed textiles
P 07 10 min drying All textiles
P 08 20 min drying All textiles
P 09 30 min drying All textiles
Programs P 01 - P 05 on dryers with Auto Stop
Program Process Textiles
P 01 Extra dry Denim
P 02 Ready to put away 100% cotton / poly cotton mixture / terry
P 03 10 min drying All textiles
P 04 20 min drying All textiles
P 05 30 min drying All textiles
Temperature
High Non-iron/normal wash Cotton and mixed fabrics
Medium Non-iron/normal wash Cotton and mixed fabrics
Low Fine wash/mild wash Delicate fabrics
No heat Airing bedspreads, duvets and bedclothes
Load
Full loads are recommended in order to achieve the best result.
Full load is indicated in kilos of dry textile.
Dryer type 4290 = 13,5 kg
Dryer type 4530 = 27 kg
Dryer type 4650 = 35 kg
Programs OPL

Instructions for use 13
1
1
2
2
3
3
4
4
5
5
6
6
Tumble dryer with manual operation - OPL
Fill garments
into the drum
Close the door
Clean filter
Wait for the dryer to
stop or press stop.
Restart
Close the door and press
start.
If the tumble dryer is not emptied
immediately after the drying time has
ended, an anti-crease programme is
automatically engaged.
This means that the drum rotates at
short intervals, thereby almost
completely avoiding creasing.
Press start The tumble dryer stops
Automatically when the clothes are
dry
or
when the selected time has expired.
Select programme
or
set the drying time
Select
temperature
High
Medium
Low
No heat
To prevent
creasing:
Empty the tumble
dryer as soon as the
program has ended.
P 01 Extra dry
P 02 Ready to put away
P 03 Ironing dry (5% moisture)
P 04 Ironing dry (10% moisture)
P 05 Ironing dry (15% moisture)
P 06 Ironing dry (20% moisture)
P 07 10 min. drying
P 08 20 min. drying
P 09 30 min. drying
Cool-down period:
Can be changed.
Reversing
on / off:
Press the clock but-
ton and the button for
cooling down time at
the same time

Instructions for use
14
Temperature
Program Process Textiles
High Non-iron/normal wash Cotton and mixed fabrics
Medium Non-iron/normal wash Cotton and mixed fabrics
Low Fine wash/mild wash Delicate fabrics
No heat Airing bedspreads, duvets and bedclothes
Load
Full loads are recommended in order to achieve the best result.
Full load is indicated in kilos of dry textile.
Dryer type 4290 = 13,5 kg
Dryer type 4530 = 27 kg
Dryer type 4650 = 35 kg
Programs - Coin operated laundries

Instructions for use 15
1
1
2
2
3
3
4
4
5
5
6
6
Tumble dryer with payment
Select
temperature
High
Medium
Low
No heat
Fill garments
into the drum
Close the door
Clean filter
Wait for the dryer to
stop or press stop.
If the tumble dryer is not emptied
immediately after the drying time has
ended, an anti-crease programme is
automatically engaged.
This means that the drum rotates at
short intervals, thereby almost
completely avoiding creasing.
Press start
To prevent
creasing:
Empty the tumble
dryer as soon as the
program has ended.
Pay with
coins / card

Error codes
16
Error codes
The dryer has automatic error indication.
Error indication is displayed as a flashing code.
Please refer to the Programming manual for Selecta Control for an explanation of error
codes.
A service technician must be contacted should an error be displayed.
The user can, however, try to correct some error codes himself.
Error code E05 or E06
When error code E05 or E06 is displayed this can be due to the motor being too hot.
Stop the dryer and wait for 5 minutes. Start again and choose a program. If this does not
help and the error code reappears a service technician must be contacted.
Error code E12
When the error code is displayed this can be due to the user having overfilled the dryer.
Remove some of the clothes, close the door, and press the start button. If this does not
help and the error code reappears a service technician must be contacted.
Error code E14. OPL laundries only
When resetting gas error E14 the dryer must be in operation on a program with heat,
and the heating indicator must be on.
The dryer must only be reset 3 times.
If the dryer, however, has to be reset more than 3 times it must be put out of order and a
service technician must be called.
Error code E15
When the error code is displayed this can be due to the user having overfilled the dryer.
Remove some of the clothes, close the door, and press the start button. If this does not
help and the error code reappears a service technician must be contacted.
Error code E16
The error code is displayed if the user presses the start button while the vacuum switch is
already closed.
Resetting by opening / closing the door and pressing start button.

Maintenance 17
1
2
Maintenance
The following should be carried out at regular
intervals, depending on the operating frequency.
Daily
• Check that the drum stops when the loading door
is opened.
• Check that the drum stops when the filter door is
opened.
If the dryer operates with the loading door or the
filter door open the machine must be placed out
of order until repairs are made.
NOTE Contact qualified service personnel to dis-
connect power from the dryer.
• Check that the dryer does not start until the
start / stop button is activated.
• Check whether the door gasket has been
cleaned (use a moist cloth).
• Cleaning of filter compartment fig 1-2.
Remove the door by opening it and pulling it
upwards. It is not necessary to remove the lint
filter for cleaning. The air system of the machine
ensures that lint and dust settle automatically at
the bottom of the filter compartment, from where
they are removed by means of a hand-held broom
or a vacuum-cleaner.
• Check that the lint filter is unbroken.

Maintenance
18
Weekly
Steam heated dryers only
Fig. 1 Cleaning the filter in front of steam calo-
drifier.
1. Open the front panel.
2. Remove the filter as shown (A).
3. Clean the filter with water or with com-
pressed air.
4. Replace the filter and close front panel.
Lubrication
All bearings are maintenance free as they are
permanently lubricated.
A
1

19
Maintenance 19
Quarterly
Check that the following are not clogged by lint
and dust or otherwise blocked:
• Fresh-air intake on the back of the dryer
• The area surrounding the dryer
• Exhaust duct
• Fresh-air intake to the room
Check that the exhaust system connections are
tight.
Dryers with RMC only
Wipe off/clean drum and lifters Awith citric
acid (Acidum citricum). If soap/softener resi-
due remains, it is recommended also to use a
coarse sponge.
Lack of cleaning the lifters can reduce the auto-
matic residual moisture control in the clothes
resulting in the clothes being moister than
requested when the program has ended.
1
A

20 Maintenance
20
2
Quarterly/Semi-annually
Disconnect the power to the dryer.
• Check and clean the fan wheel, fig. 1.
Annually
Disconnect the power to the dryer.
• Dismount front panel and finger protector. Clean
for lint/dust, fig. 2.
T4650: Check and tighten the support rollers.
• At least once a year, the inside wearing parts
should be checked by a skilled expert and
cleaned for lint.
• Check and clean the non-return flap A, fig. 3.
To be carried out by
qualified personnel.
1
3
A