Electrolux EHD 60020 P User manual

user manual
Ceramic glass induction hob
EHD60020P

Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information 2
Installation 3
Description of the appliance 5
Operating the appliance 6
Helpful hints and tips 8
Care and cleaning 9
What to do if... 10
Environment concerns 11
Subject to change without notice
SAFETY INFORMATION
For your safety and correct operation
of the appliance, read this manual care-
fully before installation and use. Always
keep these instructions with the appli-
ance even if you move or sell it. Users
must fully know the operation and safe-
ty features of the appliance.
General safety
Warning! Persons (including children)
with reduced physical sensory, mental
capabilities or lack of experience and
knowledge must not use the appliance.
They must have supervision or
instruction for the operation of the
appliance by a person responsible for
their safety.
Child safety
• Only adults can use this appliance. Chil-
dren must get supervision to make sure
that they do not play with the appliance.
• Keep all packaging away from children.
There is a risk of suffocation.
• Keep children away from the appliance
when it is on.
Warning! Start the child safety device
to prevent small children and pets from
an accidental activation of the appliance.
Safety during operation
• Remove all packaging, stickers and lay-
ers from the appliance before the first use.
• Set the cooking zones to "off" after each
use.
• Risk of burns! Do not put metallic ob-
jects, for example cutlery or saucepan
lids, on the cooking surface, as they can
become hot.
• Users with an implanted pacemaker must
keep their upper body minimum 30 cm
from induction cooking zones that are
switched on.
Warning! Fire danger! Overheated
fats and oils can catch fire very quickly.
Correct operation
• Always monitor the appliance during op-
eration.
• Only use the appliance for domestic cook-
ing tasks!
• Do not use the appliance as a work or a
storage surface.
• Do not put or keep very flammable liquids
and materials, or fusible objects (made of
plastic or aluminium) on or near the appli-
ance.
• Be careful when you connect the appli-
ance to the near sockets. Do not let elec-
tricity bonds touch the appliance or hot
cookware. Do not let electricity bonds tan-
gle.
How to prevent a damage to the
appliance
• If the objects or cookware fall on the
glass ceramic, the surface can be dam-
aged.
• Cookware made of cast iron, cast alumi-
nium or with damaged bottoms can
scratch the glass ceramic if you move
them on the surface.
• Do not let cookware boil dry to prevent
the damage to cookware and glass ce-
ramics.
• Do not use the cooking zones with empty
cookware or without cookware.
• Do not cover the parts of the appliance
with aluminium foil.
2 electrolux

• Do not cover the ventilation space of 5
mm between the worktop and front of
the unit below it.
Warning! If there is a crack on the
surface, disconnect power supply
to prevent the electric shock.
INSTALLATION
Before the installation , note down
the serial number (Ser. Nr.) from the rat-
ing plate. The rating plate of the ap-
pliance is on its lower casing.
EHD 60020P 949 594 034 00
58 GAD D5 AU
ELECTROLUX
220-240 V 50-60 Hz
7,4 kW
Induction 7,4 kW
Safety instructions
Warning! You must read these!
Make sure that the appliance is not dam-
aged because of transportation. Do not
connect a damaged appliance. If it is
necessary, speak to the supplier.
Only an authorised service technician
can install, connect or repair this appli-
ance. Use only original spare parts.
Only use built-in appliances after you as-
semble the appliance into correct built-
in units and work surfaces that align to
the standards.
Do not change the specifications or
modify this product. Risk of injury and
damage to the appliance.
Fully obey the laws, ordinances, direc-
tives and standards in force in the coun-
try where you use the appliance (safety
regulations, recycling regulations, elec-
trical safety rules etc.)!
Keep the minimum distances to other
appliances and units!
Install anti-shock protection, for exam-
ple install the drawers only with a pro-
tective floor directly below the appliance!
Protect the cut surfaces of the worktop
against moisture with a correct sealant!
Seal the appliance to the work top with
no space left with a correct sealant!
Protect the bottom of the appliance
from steam and moisture, e.g. from a
dishwasher or oven!
Do not install the appliance adjacent to
doors and below windows! If not, hot
cookware can be hit off the hob when
you open doors or windows.
Warning! Risk of injury from electrical
current. Carefully obey the instructions
for electrical connections.
• The electrical mains terminal is live.
• Make electrical mains terminal free of volt-
age.
• Install correctly to give anti-shock protec-
tion.
• Loose and incorrect plug and socket con-
nections can make the terminal become
too hot.
• A qualified electrician must install the
clamping connections correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a sin-
gle-phase or two-phase connection.
• Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C;
or higher). Speak your local Service Force
Centre.
The appliance must have the electrical instal-
lation which lets you disconnect the appli-
ance from the mains at all poles with a con-
tact opening width of minimum 3 mm.
You must have correct isolation devices:
line protecting cut-outs, fuses (screw type
fuses removed from the holder), earth leak-
age trips and contactors.
electrolux 3

Assembly
min. 500 mm
min.
50 mm
min.
50 mm
min.
5 mm
==
490+1mm 560+1mm
600mm
R 5mm
min.
25 mm
min.
5 mm
min.
20 mm
min.
38 mm
min.
5 mm
4 electrolux

DESCRIPTION OF THE APPLIANCE
Cooking surface layout
210
mm
180
mm
180
mm
145
mm
1 2
45
3
1Induction cooking zone 1800W, with
the Power function 2800W
2Induction cooking zone 1800W, with
the Power function 2800W
3Induction cooking zone 1400 W, with
Power function 2500W
4Control panel
5Induction cooking zone 2300W, with
the Power function 3700W
Control panel layout
1 2 4 53 6
8910 7
Use the sensor fields to operate the appliance. Displays, indicators and sounds
tell which functions operate.
sensor field function
1
starts and stops the hob
2
locks/unlocks the control panel
3
/ increase or decrease heat setting
4
cooking zones' indicators of timer shows for which zone you set the time
5
the timer display shows the time in minutes
6
a heat setting display shows the heat setting
7
starts the Power function
8
selects the cooking zone
9
/ increase or decrease the time
10
starts and stops the STOP+GO function
electrolux 5

Heat setting displays
Display Description
The cooking zone is off
Keep warm/STOP+GO function is active
- The cooking zone operates
Automatic heat up function is active
The induction cooking zone does not sense the cookware
There is a malfunction
A cooking zone is still hot (residual heat)
Lock/Child safety device is on
Power function is active
The automatic switch off is active
Residual heat indicator
Warning! Risk of burns from
residual heat!
The induction cooking zones make the heat
directly in the bottom of the cookware. The
glass ceramic is heated by the residual heat
of the cookware.
OPERATING THE APPLIANCE
Use the induction cooking zones with
suitable cookware.
On and Off
Touch for 1 second to start or stop the
appliance.
Automatic Switch Off
The function stops the hob
automatically if:
•all cooking zones are off .
• you do not set the heat setting after you
start the hob.
• you cover a sensor field with an object (a
pan, a cloth, etc.) for longer than 10 sec-
onds. The sound operates until you re-
move the object.
• the hob gets too hot (e.g. when a sauce-
pan boils dry). Before you use the hob
again, the cooking zone must be cool.
•you use incorrect cookware. comes
on in the display and after 2 minutes the
cooking zone stops automatically.
• you do not stop a cooking zone or
change the heat setting. After some time
comes on and the hob stops. See the
table.
Automatic Switch Off times
Heat setting - - -
Stops after 6 hours 5 hours 4 hours 1.5 hours
The heat setting
Touch to increase the heat setting.
Touch to decrease the heat setting. The
display shows the heat setting. Touch
and at the same time to switch off the
cooking zone.
6 electrolux

Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the high-
est heat setting for some time (see the graph-
ic), and then decreases to the necessary
heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1. Touch . comes on in the display.
2. Immediately touch . comes on in
the display.
3. Immediately touch again and again
until the necessary heat setting comes
on. After 3 seconds comes on in the
display.
To stop the function touch .
Switching the Power function on and off
The Power function makes more power avail-
able to the induction cooking zones. The
Power function is activated for 10 minutes
at most. After that the induction cooking
zone automatically switches back to the
highest heat setting. To switch on, touch
, comes on. To switch off, touch
or .
1
2
3
4
5
6
7
8
9
10
11
0
123456789
Power management
The power management divides the power
between two cooking zones in a pair (see
the figure). The power function increases
the power to the maximum level for one
cooking zone in the pair and automatically
decreases in the second cooking zone to a
lower power level. The display for the re-
duced zone alternates.
Using the Timer
Use the timer to set how long the cooking
zone operates for one cooking session.
Set the timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
•Selection of the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
•Starting or changing the timer: touch
or of the timer to set the time (
00
-
99
minutes). When the indicator of the
cooking zone flashes slower, the time
counts down.
•Stopping the timer: select the cooking
zone with and touch to switch off
the timer. The remaining time counts back-
wards to
00
. The indicator of the cook-
ing zone goes out.
•Checking the remaining time: select
the cooking zone with . The indicator
of the cooking zone flashes faster. Dis-
play shows the remaining time.
electrolux 7

When the time elapses, the sound operates
and
00
flashes. The cooking zone switches
off.
•Stopping the sound: touch
You can use the timer as a minute minder
while cooking zones do not operate. Touch
. Touch +or -to select the time. When
the time elapses, the sound operates and
00
flashes
Starting the STOP+GO
The function sets all cooking zones that
operate to a keep warm setting.
•Touch to start this function. The sym-
bol comes on.
•Touch to stop this function. The heat
setting that you set before comes on.
does not stop the timer function.
locks the control bars.
Locking / unlocking the control panel
You can lock the control panel, but not .
It prevents an accidental change of the heat
setting during a cooking session.
Touch the symbol . The symbol
comes on for 4 seconds.
The Timer still operates.
Touch the symbol to switch off this func-
tion. The heat setting that you set before
comes on.
When you switch off the appliance, you also
switch off this function.
The child safety device
This function prevents an accidental opera-
tion of the hob.
Starting the child safety device
•Start the hob with . Do not set the
heat settings .
•Touch until the acoustic signal. . The
symbol comes on. Switch off the ap-
pliance.
Switching off the child safety device
•Start the hob with . comes on.
Touch until the acoustic signal.
comes on
• Switch off the appliance.
Overriding the child safety device for
one cooking session
•Start the hob with . The symbol
comes on.
•Touch until the acoustic signal. The
symbol comes on. Set the heat set-
ting in less than 10 seconds. You can
operate the hob. When you stop the hob
with , the child safety device operates
again.
HELPFUL HINTS AND TIPS
Cookware
• The bottom of the cookware must
be as thick and flat as possible.
• Cookware made of enamelled steel
and with aluminium or copper bot-
toms can cause discoloration on
glass ceramic surface.
Cookware for induction cooking zones
Important! In induction cooking a powerful
electromagnetic field generates an almost
instant heat inside the cookware.
Cookware material
•correct: cast iron, steel, enamelled steel,
stainless steel, a multi-layer bottom
(marked as correct by a manufacturer).
•not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction
hob if …
• ... some water boils very quickly on a
zone set to the highest heat setting..
• ... a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must
be as thick and flat as possible.
Cookware dimensions : induction
cooking zones adapt to the dimension
of the bottom of the cookware automat-
ically to some limit. But, the magnetic
part of the bottom of the cookware
must have a minimum diameter of ap-
proximately 3/4 of the cooking zones.
Operating noises
If you can hear
• cracking noise: cookware is made of dif-
ferent materials (Sandwich construction).
8 electrolux

• whistling: you use one or more cooking
zones with high power levels and the
cookware is made of different materials
(Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer
to any defects.
Energy saving
• If possible, always put the lids on the
cookware.
• Put cookware on a cooking zone be-
fore you start it.
• Stop the cooking zones before the
end of the cooking time to use resid-
ual heat.
• The bottom of pans and cooking
zones must have the same dimen-
sion.
Examples of cooking applications
The data in the table is for guidance only.
Heat
set-
ting
Use to: Time Hints
1 Keep cooked foods warm as re-
quired
Cover
1-2 Hollandaise sauce, melt: butter, choco-
late, gelatine
5-25 min Mix occasionally
1-2 Solidify: fluffy omelettes, baked eggs 10-40
min
Cook with a lid on
2-3 Simmer rice and milkbased dishes, heat-
ing up ready-cooked meals
25-50
min
Add at least twice as much liquid as
rice, stir milk dishes part way through
3-4 Steam vegetables, fish, meat 20-45
min
Add a few tablespoons of liquid
4-5 Steam potatoes 20-60
min
Use max. ¼ l water for 750 g of po-
tatoes
4-5 Cook larger quantities of food, stews
and soups
60-150
min
Up to 3 l liquid plus ingredients
6-7 Gentle fry: escalope, veal cordon bleu,
cutlets, rissoles, sausages, liver, roux,
eggs, pancakes, doughnuts
as re-
quired
Turn halfway through
7-8 Heavy fry, hash browns, loin steaks,
steaks
5-15 min Turn halfway through
9Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep fry chips
The Power function is suitable for heating
large quantities of water.
The induction cooking zones are faster and
more energy-efficient than traditional cook-
ing surfaces.
Information on acrylamides
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),
acrylamides can pose a health risk. Thus,
we recommend that you cook at the lowest
temperatures and do not brown food too
much.
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance.
electrolux 9

For your safety, do not clean the appli-
ance with steam blasters or high-pres-
sure cleaners.
Scratches or dark stains on the glass
ceramic have no effect on how the ap-
pliance operates.
To remove the dirt:
1. – Remove immediately: melted plas-
tic, plastic foil, and food with sugar. If
not, the dirt can cause damage to the
appliance. Use a special scraper for
the glass . Put the scraper on the
glass surface at an acute angle and
move the blade on the surface .
–Remove after the appliance is suf-
ficiently cool: limescale rings , water
rings, fat stains, shiny metallic discol-
orations. Use a special cleaning agent
for glass ceramic or stainless steel.
2. Clean the appliance with a moist cloth
and some detergent.
3. At the end rub the appliance dry with
a clean cloth.
WHAT TO DO IF...
Problem Possible cause and remedy
You cannot start the appliance
or operate it.
•The key lock or child safety device operates . Stop the func-
tion. See the section "Locking/unlocking the control panel"
and “Child safety device”.
•STOP+GO operates . Stop the function. See the section
"Stop and go".
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the con-
trol panel
• Start the appliance again and set the heat setting within 10 sec-
onds.
A sound operates when the ap-
pliance is off.
You covered one or more sensor fields. Uncover the sensor fields.
A sound operates 6 times, the
appliance stops.
You covered one or more sensor fields. Uncover the sensor fields.
The residual heat indicator does
not come on.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone must be hot, speak to the after sales
service.
The automatic warm up function
does not start.
•There is still residual heat on the cooking zone . Let the
cooking zone cool down
• The highest heat setting is set. The highest heat setting has
the same power as the automatic warm up function.
A sound operates and appliance
starts and stops again. After 5
seconds one more sound oper-
ates.
You covered . Uncover the sensor field.
Sensor fields become hot. The cookware is too big or you put it too near the controls. Put
large cookware on the rear cooking zones if necessary.
The display changes between
two heat settings.
Power Management decreases the power of this cooking zone.
Use cooking zones on the other side.
comes on. • The automatic switch-off operates. Stop the appliance and
start it again.
Overheating protection for the cooking zone operates. Stop the
cooking zone and start it again.
10 electrolux

Problem Possible cause and remedy
comes on. • The cookware is incorrect. Use the correct cookware.
• There is no cookware on the cooking zone. Put cookware on
the cooking zone.
• The diameter of the bottom of the cookware is too small for
the cooking zone. Use the correct cookware.
and a number come on. There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the
house. Connect again. If comes on again, speak to the After
Sales Service.
and come on. Light rays that are too strong on the control panel, for example
bright sunlight. Shade the control panel for a short time, for exam-
ple with a hand. A sound operates, the appliance stops. Start the
appliance again.
come on There is an error in the appliance, because a cookware boils dry
or you use not correct cookware. Overheating protection for the
cooking zone operates. The automatic switch-off operates.
Switch off the appliance. Remove the hot cookware. After approx-
imately 30 seconds switch on the cooking zone again.
should disappear, residual heat indicator can stay. Cool down
the cookware and check it with the section "Cookware for the in-
duction cooking zone".
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the Customer Care Department. Give the da-
ta from the rating plate, three-digit-letter
code for the glass ceramic (it is in the cor-
ner of the cooking surface) and an error mes-
sage that comes on.
If you operated the appliance incorrectly,
the servicing by a customer service techni-
cian or dealer will not be free of charge,
even during the warranty period. The instruc-
tions about the customer service and condi-
tions of guarantee are in the guarantee book-
let.
ENVIRONMENT CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Packaging material
The packaging materials are friendly to
the environment and can be recycled.
The plastic components are identified
by marking: >PE<,>PS<, etc. Discard
the packaging materials as household
waste at the waste disposal facilities in
your municipality.
electrolux 11

892935126-B-282010
www.electrolux.com/shop