Electrolux HHOB870S User manual

HHOB870S
EN Hob User Manual

CONTENTS
1. SAFETY INFORMATION....................................................................................2
2. SAFETY INSTRUCTIONS..................................................................................5
3. INSTALLATION.................................................................................................. 8
4. PRODUCT DESCRIPTION.............................................................................. 10
5. DAILY USE....................................................................................................... 12
6. ADDITIONAL FUNCTIONS.............................................................................. 16
7. HINTS AND TIPS............................................................................................. 17
8. CARE AND CLEANING....................................................................................19
9. TROUBLESHOOTING......................................................................................21
10. TECHNICAL DATA.........................................................................................24
11. ENERGY EFFICIENCY.................................................................................. 25
12. ENVIRONMENTAL CONCERNS................................................................... 25
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.electrolux.com/support
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damage that are the result
www.electrolux.com2

of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety
•This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children of less than 8 years of age and persons with
very extensive and complex disabilities shall be kept
away from the appliance unless continuously
supervised.
•Children should be supervised to ensure that they do
not play with the appliance.
•Keep all packaging away from children and dispose of
it appropriately.
•WARNING: Keep children and pets away from the
appliance when it operates or when it cools down.
Accessible parts become hot during use.
•If the appliance has a child safety device, it should be
activated.
•Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•This appliance is for cooking purposes only.
•This appliance is designed for single household
domestic use in an indoor environment.
•This appliance may be used in, offices, hotel guest
rooms, bed & breakfast guest rooms, farm guest
houses and other similar accommodation where such
use does not exceed (average) domestic usage levels.
•WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to avoid
touching heating elements.
ENGLISH 3

•WARNING: Unattended cooking on a hob with fat or
oil can be dangerous and may result in fire.
•Never use water to extinguish the cooking fire. Switch
off the appliance and cover flames with e.g. a fire
blanket or lid.
•WARNING: The appliance must not be supplied
through an external switching device, such as a timer,
or connected to a circuit that is regularly switched on
and off by a utility.
•CAUTION: The cooking process has to be supervised.
A short term cooking process has to be supervised
continuously.
•WARNING: Danger of fire: Do not store items on the
cooking surfaces.
•Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
•Do not use the appliance before installing it in the
built-in structure.
•Do not use a steam cleaner to clean the appliance.
•After use, switch off the hob element by its control and
do not rely on the pan detector.
•If the glass ceramic surface / glass surface is cracked,
switch off the appliance and unplug it from the mains.
In case the appliance is connected to the mains
directly using junction box, remove the fuse to
disconnect the appliance from power supply. In either
case contact the Authorised Service Centre.
•Ensure good air ventilation in the room where the
appliance is installed to avoid the backflow of gases
into the room from appliances burning gas or other
fuels, including open fires.
•Make sure that the ventilation openings are not
blocked and the air collected by the appliance is not
conveyed into a duct used to exhaust smoke and
steam from other appliances (central heating systems,
thermosiphons, water-heaters, etc.).
www.electrolux.com4

•When the appliance operates with other appliances
the maximum vacuum generated in the room should
not exceed 0.04 mbar.
•Clean the hood filter regularly and remove grease
deposits from the appliance to prevent the risk of fire.
•If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
•If the appliance is connected directly to the power
supply, the electrical installation must be equipped
with an isolating device that allows to disconnect the
appliance from the mains at all poles. Complete
disconnection must comply with conditions specified in
the overvoltage category III. The means for
disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
•WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by
the manufacturer of the appliance in the instructions
for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause
accidents.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
WARNING!
Risk of injury or damage to
the appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Keep the minimum distance from
other appliances and units.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Seal the cut surfaces with a sealant to
prevent moisture from causing
swelling.
• Protect the bottom of the appliance
from steam and moisture.
• Do not install the appliance next to a
door or under a window. This
prevents hot cookware from falling
from the appliance when the door or
the window is opened.
• Do not install the exhaust air into a
wall cavity, unless the cavity is
designed for that purpose.
• For ductless installation, the fan outlet
must be positioned directly against
the wall or must be separated by an
additional cabinet wall, in order to
prevent access to the fan blades.
• Each appliance has cooling fans on
the bottom.
ENGLISH 5

• If the appliance is installed above a
drawer:
– Do not store any small pieces or
sheets of paper that could be
pulled in, as they can damage the
cooling fans or impair the cooling
system.
– Keep a distance of minimum 2 cm
between the bottom of the
appliance and parts stored in the
drawer.
• Remove any separator panels
installed in the cabinet below the
appliance.
2.2 Electrical Connection
WARNING!
Risk of fire and electric
shock.
• All electrical connections should be
made by a qualified electrician
according to the connection diagram
or installation booklet.
• In case of exhaust installation, and
where the accessories are present or
mandatory (wall valve, window switch
and/or window opener) electrical
connections should be made by a
qualified electrician, according to the
connection diagram or installation
booklet.
• The appliance must be earthed.
• Before carrying out any operation
make sure that the appliance is
disconnected from the power supply.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
• Use the correct electricity mains
cable.
• Do not let the electricity mains cable
tangle.
• Make sure that a shock protection is
installed.
• Use the strain relief clamp on the
cable.
• Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to a socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug (if applicable) or to the
mains cable. Contact our Authorised
Service Centre or an electrician to
change a damaged mains cable.
• The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
2.3 Use
WARNING!
Risk of injury, burns and
electric shock.
• Do not change the specification of this
appliance.
• Remove all the packaging, labelling
and protective film (if applicable)
before first use.
• Make sure that the ventilation
openings are not blocked. The
ventilation must be checked
periodically by a qualified person.
• Do not let the appliance stay
unattended during operation.
• Set the cooking zone to “off” after
each use.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.
www.electrolux.com6

• Do not operate the appliance with wet
hands or when it has contact with
water.
• Do not use the appliance as a work
surface or as a storage surface.
• If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.
• Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
• When you place food into hot oil, it
may splash.
• Never use an open flame when the
integrated hood operates.
WARNING!
Risk of fire and explosion
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and
oils when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food
remnants, can cause fire at a lower
temperature than oil used for the first
time.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the
appliance.
• Do not keep hot cookware on the
control panel.
• Do not put a hot pan cover on the
glass surface of the hob.
• Do not let cookware boil dry.
• Be careful not to let objects or
cookware fall on the appliance. The
surface can be damaged.
• Do not activate the cooking zones
with empty cookware or without
cookware.
• Do not put aluminium foil on the
appliance.
• Never remove the grid or the hood
filter when the integrated hood or the
appliance operates.
• Never use the integrated hood without
the hood filter.
• Do not cover the inlet of the integrated
hood with cookware.
• Do not open the bottom lid when the
integrated hood or the appliance
operates.
• Do not place small or light objects
near the integrated hood to avoid the
risk of being trapped.
• Cookware made of cast iron,
aluminium or with a damaged bottom
can cause scratches on the glass /
glass ceramic. Always lift these
objects up when you have to move
them on the cooking surface.
2.4 Care and cleaning
• Clean the appliance regularly to
prevent the deterioration of the
surface material.
• Switch off the appliance and let it cool
down before cleaning.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Use only neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal
objects.
2.5 Service
• To repair the appliance contact the
Authorised Service Centre. Use
original spare parts only.
• Concerning the lamp(s) inside this
product and spare part lamps sold
separately: These lamps are intended
to withstand extreme physical
conditions in household appliances,
such as temperature, vibration,
humidity, or are intended to signal
information about the operational
status of the appliance. They are not
intended to be used in other
applications and are not suitable for
household room illumination.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
• Contact your municipal authority for
information on how to dispose of the
appliance.
ENGLISH 7

• Disconnect the appliance from the
mains supply.
• Cut off the mains electrical cable
close to the appliance and dispose of
it.
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down the
information below from the rating plate.
The rating plate is on the bottom of the
hob.
Serial number ...........................
3.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
units and work surfaces that align to the
standards.
3.3 Connection cable
• The hob is supplied with a connection
cable.
• To replace the damaged mains cable,
use the cable type: H05V2V2-F which
withstands a temperature of 90 °C or
higher. Contact an Authorised Service
Centre. The connection cable may
only be replaced by a qualified
electrician.
3.4 Attaching the seal -
Integrated installation
1. Clean the rabbets in the worktop.
2. Cut the supplied 3x10mm seal stripe
into 4 stripes. The stripes must have
the same length as the rabbets.
3. Cut the ends of the stripes at an
angle of 45°. They should fit in the
corners of the rabbets accurately.
4. Attach the stripes to the rabbets. Do
not stretch the stripes. Do not bond
the ends of the stripes one over the
other.
After you assemble the hob, seal the
remaining gap between the glass
ceramic and the worktop with silicone.
Make sure the silicone does not get
under the glass ceramic.
3.5 Attaching the seal - On-top
installation
1. Clean the worktop around the cut out
area.
2. Attach the supplied 2x6mm seal
stripe to the lower edge of the hob,
along the outer edge of the glass
ceramic. Do not stretch it. Make sure
that the ends of the seal stripe are
located in the middle of one side of
the hob.
3. Add some millimetres to the length
when you cut the seal stripe.
4. Join the two ends of the seal stripe
together.
3.6 Assembly
Refer to the installation booklet for
detailed information on how to assemble
your hob.
Follow the hob connection diagram and
the window switch connection diagram
presented in the installation booklet and /
or the labels under the hob.
min.
50mm
min.
500mm
If the appliance is installed above a
drawer, the hob ventilation can warm up
the items stored in the drawer during the
cooking process.
www.electrolux.com8

ON-TOP INSTALLATION
830 515
250
80
515
480
442
55
830
770
500
212
722
916
98
254
490
25-50
220
min.4
min.55
min.
1500
490
780+1
+1
min.55
max.R5
INTEGRATED INSTALLATION
830 515
515
480
442
60
830
770
500
217
722
916
103
254
490
220
min.4
min.55
min.
1500
490
780+1
+1
min.55
max.R5
519+1
28
14,5 7
R5
R10
834+1
780+1
490+1
25-50
Find the video tutorial "How to install
your Electrolux Extractor Hob" by typing
out the full name indicated in the graphic
below.
ENGLISH 9

www.youtube.com/electrolux
www.youtube.com/aeg
How to install your Electrolux
Extractor Hob
Filter housing assembly
Before first use make sure to place the
filter inside the housing, with the silver
side facing out. Once the filter housing is
assembled, put it inside the hood cavity
and place the grid on the hood.
4. PRODUCT DESCRIPTION
4.1 Product overview
3
2
1
4
56
7
7 6 5 48
8
1Grid
2Filter
3Filter housing
4Hob
5Tube
6Cabinet back wall fitting
7Tube
8Adapter
4.2 Cooking surface layout
3
2
1
1
1
1
1Induction cooking zone
2Control panel
3Hood
www.electrolux.com10

4.3 Control panel layout
12
31415
654 137 8 109 11 12
Use the sensor fields to operate the appliance. The displays, indicators and sounds
tell which functions operate.
Sen‐
sor
field
Function Description
1ON / OFF To activate and deactivate the appliance.
2Timer To set the function.
3 / - To increase or decrease the time.
4- Timer display To show the time in minutes.
5Bridge To activate and deactivate the function.
6Pause To activate and deactivate the function.
7- Hood timer display To show the time in minutes.
8- Hood control bar To set a fan speed.
9Boost To activate and deactivate the function.
10 AUTO Automatic mode of the
hood
To activate and deactivate the function.
11 Breeze To activate and deactivate the function.
12 Hood filter indicator To indicate and remind that the hood fil‐
ters should be cleaned.
ENGLISH 11

Sen‐
sor
field
Function Description
13 Lock / Child Safety De‐
vice
To lock / unlock the control panel.
14 PowerBoost To activate the function.
15 - Hob control bar To set a heat setting.
4.4 Display indicators
Indicator Description
+ digit There is a malfunction.
/ / OptiHeat Control (3 step Residual heat indicator): continue cook‐
ing / keep warm / residual heat.
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Activating and deactivating
Press and hold to activate or
deactivate the hob.
5.2 Pot detection
This feature indicates the presence of
cookware on the hob and deactivates the
cooking zones if no cookware is detected
during a cooking session.
If you put cookware on a cooking zone
before you select a heat setting, the
indicator above 0 on the control bar
appears.
If you remove cookware from an
activated cooking zone and set it aside
temporarily, the indicators above the
corresponding control bar will start
blinking. If you do not place the
cookware back on the activated cooking
zone within 60 seconds, the cooking
zone will automatically deactivate.
To resume cooking, make sure to put the
cookware back on the cooking zones
within the indicated timeout.
5.3 Heat setting
1. Press the desired heat setting on the
control bar.
The indicators above the control bar
appear up to the selected heat setting
level.
2. To deactivate a cooking zone, press
0.
5.4 PowerBoost
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to “Technical data”
chapter.
To activate the function for a cooking
zone: touch .
www.electrolux.com12

To deactivate the function: change the
heat setting.
5.5 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / As long as the
indicator is on, there is a risk
of burns from residual heat.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
The indicators / / appear when
a cooking zone is hot. They show the
level of the residual heat for the cooking
zones you are currently using.
The indicator may also appear:
• for the neighbouring cooking zones
even if you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the
cooking zone has cooled down.
5.6 Timer
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a
single cooking session. You can set the
function for the hood separately. Refer to
"Hood functions".
Set the heat setting for the selected
cooking zone and then set the function.
1. Press . 00 appears on the timer
display.
2. Press or to set the time (00-99
minutes).
3. Press to start the timer or wait 3
seconds. The timer begins to count
down.
To change the time: select the cooking
zone with and press or .
To deactivate the function: select the
cooking zone with and press . The
remaining time counts back to 00.
The timer finishes counting down, a
signal sounds and 00 blinks. The cooking
zone deactivates. Press any symbol to
stop the signal and blinking.
Minute Minder
You can use this function when the hob
is activated but the cooking zones do not
operate. The heat setting shows 00.
1. Press .
2. Press or to set the time.
The timer finishes counting down, a
signal sounds and 00 blinks. Press any
symbol to stop the signal and blinking.
To deactivate the function: press
and . The remaining time counts back
to 00.
5.7 Power management
If multiple zones are active and the
consumed power exceeds the limitation
of the power supply, this function divides
the available power between all cooking
zones. The hob controls heat settings to
protect the fuses of the house
installation.
• Cooking zones are grouped according
to the location and number of the
phases in the hob. Each phase has a
maximum electricity loading. If the
hob reaches the limit of maximum
available power within one phase, the
power of the cooking zones will be
automatically reduced.
• The heat setting of the cooking zone
selected first is always prioritised. The
remaining power will be divided
between the other cooking zones
according to the order of selection.
• For cooking zones that have a
reduced power, the control bar blinks
and shows the maximum possible
heat settings.
• Wait until the display stops flashing or
reduce the heat setting of the cooking
zone selected last. The cooking zones
will continue operating with the
ENGLISH 13

reduced heat setting. Change the
heat settings of the cooking zones
manually, if necessary.
• The hood extractor is always available
as an electrical load.
Refer to the illustration for possible
combinations in which power can be
distributed among the cooking zones.
5.8 Hood functions
WARNING!
Refer to Safety chapters.
Activating and deactivating the
hood
The hood can operate alongside the hob
during the cooking session, as well as
while the hob is switched off.
1. Press one of the fan speed levels
(1-3) on the hood control bar to
activate the hood.
A signal sounds and indicators above the
hood control bar appear.
2. Adjust the fan speed setting as
needed by pressing either of the
available levels on the hood control
bar.
3. To deactivate the hood, press 0 on
the hood control bar.
The indicators above the hood control
bar disappear.
AUTO
The function automatically adjusts the
fan speed level based on the selected
heat setting level of the hob.
When you use the hob for the first time,
the function is usually activated by
default.
You can activate the function while the
hob is on but none of the cooking zones
are active, or at any point during the
cooking session.
If you activate the function
while the hob is off, none of
the cooking zones operate
and there is no residual heat
visible on the control panel,
the function will switch off by
itself after a few seconds.
1. Press and hold to activate the
hob.
2. Press AUTO to activate the function.
A signal sounds and an indicator above
the symbol appears.
3. Place cookware on the hob and
select a heat setting level. Increase
or decrease the heat setting level as
needed.
The hood will react to the heat setting
level, increasing or decreasing the fan
speed level accordingly. The indicators
above the hood control bar appear.
4. Press 0 on the hob control bar to
deactivate a cooking zone or to
deactivate the hob.
If the residual heat indicator appears,
AUTO will continue to adjust the fan
speed. If the remaining heat is low,
Breeze might start operating as well.
5. To deactivate the function during
cooking and switch to the manual
mode of the hood, press AUTO or
any other setting on the hood control
bar.
A signal sounds and the indicator above
the symbol disappears.
www.electrolux.com14

Automatic modes - fan speed levels
Hood
mode
Residual heat level (hob is
off)
Residual heat level
(hob is on)
Boiling Frying
0
H1 - - - - - - - - 1
H2 - - - - - 1 1 1
H3 - - - 1 1 1 2
H4 - 1 1 1 2 2 3
If you deactivate the hob
while AUTO is running, the
function will be remembered
for the next cooking session.
Hood timer
Use the function to specify how long the
hood should operate.
It is not possible to set the hood timer
while the hood is deactivated.
1. Press next to the hood control
bar.
2. Press or to set the time (00-99
minutes).
3. Press to start the timer.
The timer begins to count down.
• Once the timer finishes counting
down, the hood stops operating.
• It is possible to set the hood timer
while AUTO is on. If AUTO
deactivates the hood before the set
time runs out, the timer will be reset.
• If the timer deactivates the hood
before AUTO, the function will be
switched off. The indicators above 0
and AUTO will disappear.
• In both cases AUTO will be activated
next time you switch on the hob.
Boost
The function activates the hood fan at its
maximum speed level.
Press to activate the function.
A signal sounds and an indicator above
the symbol appears.
The function can operate uninterrupted
for a maximum of 10 minutes. After that
time the fan speed setting automatically
changes to 3. You can activate the
function again, if needed.
Breeze
The function sets the hood fan to an
extra low speed. The fan starts running
at a minimum noise level immediately
after the function is activated. You can
use the function after cooking to remove
any lingering smells or steam.
To activate the function when the hob
is off:
1. Press .
A signal sounds and an indicator above
the symbol appears. A timer set to 60
minutes appears on the display next to
the hood control bar.
2. Adjust the timer using or , if
needed.
After the timer finishes counting down,
the hood deactivates automatically.
5.9 Menu structure
The table shows the basic menu
structure.
User settings
Sym‐
bol
Setting Possible op‐
tions
bSound On / Off (--)
hHood mode 1 - 4
ENGLISH 15

Sym‐
bol
Setting Possible op‐
tions
EAlarm / error
history
The list of re‐
cent alarms /
errors.
To enter user settings: press and hold
. Then, press and hold . The
settings appear on the timer of the left
cooking zones.
Navigating the menu: the menu
consists of the setting symbol and a
value. The symbol appears on the rear
timer and the value appears on the front
timer. To navigate between the settings
press on the front timer. To change
the setting value press or on the
front timer.
To exit the menu: press .
OffSound Control
You can activate / deactivate the sounds
in the Menu > User settings.
Refer to "Menu structure".
When the sounds are off you can still
hear the sound when:
• you touch ,
• the timer comes down,
• you press an inactive symbol.
6. ADDITIONAL FUNCTIONS
6.1 Automatic Switch Off
The function deactivates the hob
automatically if:
• all of the cooking zones, as well as
the hood, are deactivated,
• you do not set any heat setting or fan
speed setting after the activation of
the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). A signal
sounds and the hob deactivates.
Remove the object or clean the
control panel.
• the appliance gets too hot (e.g. when
a saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you do not deactivate a cooking zone
or change the heat setting. After some
time, the hob deactivates.
The relation between the heat setting /
fan speed setting and the time after
which the appliance deactivates:
Heat setting The hob deacti‐
vates after
1 - 2 6 hours
3 - 4 5 hours
5 4 hours
Heat setting The hob deacti‐
vates after
6 - 9 1.5 hours
Fan speed setting The hood deacti‐
vates after
10 hours
1 - 3 10 hours
10 minutes
6.2 Pause
This function sets all cooking zones that
operate to the lowest heat setting. The
speed of the hood fan decreases to 1.
When you activate the function while the
hood operates in the automatic mode,
the speed of the hood fan will not be
reduced.
When the function operates, and
can be used. All other symbols on the
control panels are locked.
The function does not stop the timer
functions.
1. To activate the function: press .
www.electrolux.com16

The heat setting is lowered to 1. The
speed of the hood fan decreases to 1.
2. To deactivate the function: press
.
The previous heat setting / fan speed
setting comes on.
6.3 Lock
You can lock the control panel while the
hob operates. It prevents an accidental
change of the heat setting / hood speed
setting.
Set the heat setting / hood speed setting
first.
To activate the function: press .
To deactivate the function: press
again.
The function deactivates as
you deactivate the hob.
6.4 Child Safety Device
This function prevents an accidental
operation of the hob and the hood.
To activate the function: press . Do
not set any heat setting / hood setting.
Press and hold for 3 seconds, until
the indicator above the symbol appears.
Deactivate the hob with .
The function stays active
when you deactivate the
hob. The indicator above
is on.
To deactivate the function: press .
Do not set any heat setting / hood
setting. Press and hold for 3 seconds,
until the indicator above the symbol
disappears. Deactivate the hob with .
Cooking with the function activated:
press , then press for 3 seconds,
until the indicator above the symbol
disappears. You can operate the hob.
When you deactivate the hob with the
function operates again.
6.5 Bridge
The function operates when
the pot covers the centres of
the two zones.
This function connects two cooking
zones and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the function for left / right
cooking zones: touch / . To set or
change the heat setting touch one of the
left / right control sensors.
To deactivate the function: touch /
. The cooking zones operate
independently.
7. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
7.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking zones with
suitable cookware.
• The bottom of the cookware must be
as thick and flat as possible.
• Ensure pan bases are clean and dry
before placing on the hob surface.
• In order to avoid scratches, do not
slide or rub the pot across the ceramic
glass.
Cookware material
•correct: cast iron, steel, enamelled
steel, stainless steel, multi-layer
bottom (with a correct marking from a
manufacturer).
ENGLISH 17

•not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is suitable for an induction
hob if:
• water boils very quickly on a zone set
to the highest heat setting.
• a magnet pulls on to the bottom of the
cookware.
Cookware dimensions
• Induction cooking zones adapt to the
dimension of the bottom of the
cookware automatically.
• The cooking zone efficiency is related
to the diameter of the cookware. The
cookware with a diameter smaller
than the minimum receives only a part
of the power generated by the
cooking zone.
• For both safety reasons and optimal
cooking results, do not use cookware
larger than indicated in "Cooking
zones specification". Avoid keeping
cookware close to the control panel
during the cooking session. This
might impact the functioning of the
control panel or accidentally activate
hob functions.
Refer to "Technical data".
Steam Vented Lids
To further optimize the cooking sessions
alongside the hood you can use the
special Steam Vented Lids with your
cookware. The lids are designed to direct
the steam produced inside the pot
towards the hood, minimizing unwanted
cooking smells and excessive humidity in
the kitchen. The lids are available to buy
separately in several sizes to fit most
common cookware types. For more
information visit our website.
7.2 The noises during operation
If you can hear:
• crack noise: cookware is made of
different materials (a sandwich
construction).
• whistle sound: you use a cooking
zone with a high power level and the
cookware is made of different
materials (a sandwich construction).
• humming: you use a high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not
indicate any malfunction.
7.3 Öko Timer (Eco Timer)
To save energy, the heater of the
cooking zone deactivates before the
count down timer sounds. The difference
in the operation time depends on the
heat setting level and the length of the
cooking operation.
7.4 Examples of cooking
applications
The correlation between the heat setting
of a zone and its consumption of power
is not linear. When you increase the heat
setting, it is not proportional to the
increase of the consumption of power. It
means that a cooking zone with the
medium heat setting uses less than a
half of its power.
The data in the table is for
guidance only.
www.electrolux.com18

Heat setting Use to: Time
(min)
Hints
1 Keep cooked food warm. as nec‐
essary
Put a lid on the cookware.
1 - 2 Hollandaise sauce, melt: but‐
ter, chocolate, gelatine.
5 - 25 Mix from time to time.
1 - 2 Solidify: fluffy omelettes,
baked eggs.
10 - 40 Cook with a lid on.
2 - 3 Simmer rice and milkbased
dishes, heat up ready-
cooked meals.
25 - 50 Add at least twice as much
liquid as rice, mix milk
dishes halfway through the
procedure.
3 - 4 Steam vegetables, fish,
meat.
20 - 45 Add a couple of tablespoons
of liquid.
4 - 5 Steam potatoes. 20 - 60 Use max. ¼ l of water for
750 g of potatoes.
4 - 5 Cook larger quantities of
food, stews and soups.
60 -
150
Up to 3 l of liquid plus ingre‐
dients.
6 - 7 Gentle fry: escalope, veal
cordon bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts.
as nec‐
essary
Turn halfway through.
7 - 8 Heavy fry, hash browns, loin
steaks, steaks.
5 - 15 Turn halfway through.
9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
Boil large quantities of water. PowerBoost is activated.
7.5 Hints and Tips for the hood
• The grid covering the hood is made of
aluminium and stainless steel. You
can put pots on it while the hood is
not operating. It will not cause any
damage.
• When AUTO mode operates, the fan
starts at a low speed at the beginning
of each cooking session. The speed
increases gradually. You can also
adjust the speed of the fan manually.
• In case of exhaust installation you
have to install a window switch. You
need to buy it separately as it is not
supplied with the hood. The window
switch has to be installed by an
authorised technician. Refer to the
installation booklet.
8. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
8.1 General information
• Clean the hob after each use.
• Always use cookware with a clean
base.
• Scratches or dark stains on the
surface have no effect on how the hob
operates.
• Use a special cleaner suitable for the
surface of the hob.
ENGLISH 19

• Use a special scraper for the glass.
8.2 Cleaning the hob
•Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
Use a special hob scraper on the
glass surface at an acute angle and
move the blade on the surface.
•Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and a non-abrasive
detergent. After cleaning, wipe the
hob dry with a soft cloth.
•Remove shiny metallic
discoloration: use a solution of water
with vinegar and clean the glass
surface with a cloth.
8.3 Cleaning the hood
Grid
The grid drives the air into the hood.
Additionally, it protects the hood system
and prevents foreign objects from falling
inside by accident. You can wash the
grid manually or in a dishwasher.
Water tank
There is a water tank located under the
hood. It collects the condensation
created during each cooking process.
Remember to empty the water tank
regularly.
Before you open the water tank, place a
container or a tray under it to collect
water. To open the water tank, slide the
latches out and open them one by one.
WARNING!
Make sure you do not let
water get inside the hood.
If water or other liquids spill inside the
hood system:
• switch off the hood in the first place,
• lift the grid and clean the hood area
carefully with a moist cloth or sponge
and a mild cleaning agent,
• wipe away the excess liquid gathered
on the bottom of the hood cavity using
a sponge or a dry cloth,
• switch on the hood, set the fan speed
level to 2 or higher and let it run for
some time to get rid of the remaining
moisture.
8.4 Cleaning the hood filter
The filter prevents grease particles from
getting into the hood system. Clean the
filter regularly and regenerate it
periodically.
Normal cleaning
Clean the filter as soon as the built-up
grease is visible. The cleaning frequency
depends on the amount of fat and oil
used in cooking. It is recommended to
clean the filter every 10-20 hours, or
more frequently, if needed.
1. Remove the filter and filter housing
carefully. They are located right
under the grid in the centre of the
hob.
www.electrolux.com20