Electrolux E6WHPED3 User manual

1
Pedestal with drawer /  /
Podstavec se zásuvkou / Sokkel med skuffe /
Unterbausockel mit Schublade /  /
Pedestal con cajón / Sahtliga alus / Vetolaatikolla
varustettu jalusta / Socle avec tiroir / 
s ladicom / Fiókos talapzat / Piedistallo con
cassetto /  / Pamatne ar
atvilktni / Sokkel med skuff /Voetstuk met
lade / / Pedestal com
gaveta / Suport cu sertar /   /
Podstavec so zásuvkou / Podstavek s predalom /
   / Piedestal med låda /
Çekmeceli kaide /    
EN Accessories
BG 
CZ 
DA Tilbehør
DE Zubehör
EL 
ES Accesorios
ET Tarvikud
FI Tarvikkeet
FR Accessoires
HR Dodaci
HU Tartozékok
IT Accessori
LT Priedai
LV Piederumi
NL Accessoires
NO Tilbehør
PL Akcesoria
PT Acessórios
RO Accesorii
RU 
SI 
SK 
SR 
SV Tillbehör
TR Aksesuarlar
UA 
Installation Instruction 2
   8
Pokyny kinstalaci 14
Installationsvejledning 20
Montageanleitung 26
  32
Instrucciones de instalación 38
Paigaldusjuhend 44
Asennusohjeet 50
Instructions d'installation 56
 62
Szerelési utasítások 68
Istruzioni di installazione 74
Montavimo instrukcija 80
 86
Montage-instructies 92
Monteringsanvisning 98
Instrukcja instalacji 104
Instruções de instalação 110
Instruciuni de instalare 116
   122
Navodila za namestitev 128
 134
   140
Installationsinstruktion 146
 152
  158
Model E6WHPED3
2
7
12
17
22
27
32
37
42
47
52
57
62
67
72
77
82
87
92
97
102
107
112
117
122
127
132
Model
E6WHPED3
E6WHPED2
Pedestal with drawer /  /
Podstavec se zásuvkou / Sokkel med skuffe /
Unterbausockel mit Schublade /  /
Pedestal con cajón / Sahtliga alus / Vetolaatikolla
varustettu jalusta / Socle avec tiroir / 
s ladicom / Fiókos talapzat / Piedistallo con
cassetto /  / Pamatne ar
atvilktni / Sokkel med skuff /Voetstuk met
lade / / Pedestal com
gaveta / Suport cu sertar /   /
Podstavec so zásuvkou / Podstavek s predalom /
   / Piedestal med låda /
Çekmeceli kaide /    
EN Accessories
BG 
CZ 
DA Tilbehør
DE Zubehör
EL 
ES Accesorios
ET Tarvikud
FI Tarvikkeet
FR Accessoires
HR Dodaci
HU Tartozékok
IT Accessori
LT Priedai
LV Piederumi
NL Accessoires
NO Tilbehør
PL Akcesoria
PT Acessórios
RO Accesorii
RU 
SI 
SK 
SR 
SV Tillbehör
TR Aksesuarlar
UA 
Installation Instruction 2
   8
Pokyny kinstalaci 14
Installationsvejledning 20
Montageanleitung 26
  32
Instrucciones de instalación 38
Paigaldusjuhend 44
Asennusohjeet 50
Instructions d'installation 56
 62
Szerelési utasítások 68
Istruzioni di installazione 74
Montavimo instrukcija 80
 86
Montage-instructies 92
Monteringsanvisning 98
Instrukcja instalacji 104
Instruções de instalação 110
Instruciuni de instalare 116
   122
Navodila za namestitev 128
 134
   140
Installationsinstruktion 146
 152
  158
Model E6WHPED3

2
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
Do not stack a dryer on top of washing
machine if using a pedestal.
The pedestal cannot be used with
tumble dryers, only with washing
machines.
•Dimension
•Accessories
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
WARNING!
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
WARNING!
WARNING! Do not install it alone.
WARNING! Before proceeding
with installation, make sure there
is enough room.
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x 2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
(A) 2 front metal brackets.
(B) 2 rear brackets
for washing machine.
(C) 10 screws.
(D) 1 spanner to adjust the levelling feet.
(E) 2 additional containers
(where included).
Safety Information Product & Accessories
Information
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)

3
The pedestal cannot be used with
tumble dryers, only with washing
machines.
Make sure that the rear rubber feet
are mounted.
Adjust the front adjustable feet
to make the pedestal stable.
If you install the pedestal under
a brand new appliance, unpack
the appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
If the appliance is already connected:
- Disconnect the mains plug from
the mains socket.
- Close the water tap.
- Disconnect the inlet hose(s) from
the water tap and let the water ow
out from the inlet hose(s) and the
drain hose and collect it in a shallow
basin.
Installation Procedure
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Screw the front brackets on the
pedestal.
Gently lay the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
Adjust the appliance adjustable feet
at a suitable height to allow it to slide
under the foot locking brackets.
Lay the pedestal on the same side
and slide it forward so that the
appliance front feet slides under foot
locking brackets.
4
8. For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9. For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
11. For washing machine. Put the
pedestal and appliance in vertical
position. If necessary, adjust the
appliance feet and go to step 16.
Check that the screws are firmly
screwed.
12. For tumble dryer. Unscrew and
retain the two bottom screws from
the back of the appliance.
10. For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washer
and the pedestal.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.
4
8. For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9. For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
11. For washing machine. Put the
pedestal and appliance in vertical
position. If necessary, adjust the
appliance feet and go to step 16.
Check that the screws are firmly
screwed.
12. For tumble dryer. Unscrew and
retain the two bottom screws from
the back of the appliance.
10. For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washer
and the pedestal.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.

4
Use the screws supplied to secure the
rear brackets (B) on both the washer
and the pedestal.
Where included, you can insert the
additional container (F).
Connect the appliance as indicated
in the instructions supplied with the
appliance.
10. 13.
14.
Put the pedestal and appliance in
vertical position. If necessary, adjust
the appliance feet and go to step
12. Check that the screws are rmly
screwed.
Move the Pedestal/Appliance
assembly to its permanent location.
Use a spirit level to check if the
assembly is properly leveled. If not
leveled, adjust feet to level properly.
11.
12.
4
8. For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9. For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
11. For washing machine. Put the
pedestal and appliance in vertical
position. If necessary, adjust the
appliance feet and go to step 16.
Check that the screws are firmly
screwed.
12. For tumble dryer. Unscrew and
retain the two bottom screws from
the back of the appliance.
10. For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washer
and the pedestal.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.
5
14. For tumble dryer. Lift the appliance
and slide backwards so that the
appliance front feet slides under
foot locking brackets.
15. For tumble dryer. Screw the rear
brackets (C) to the back of the
appliance by using the screws
removed in step 12 and adjust the
appliance feet if required.
16. Move the Pedestal/Appliance
assembly to its permanent
location. Use a spirit level to check
if the assembly is properly leveled.
If not leveled, adjust feet to level
properly.
17. Where included, you can insert
the additional container (F).
18. Connect the appliance as indicated
in the instructions supplied with the
appliance.
5
14. For tumble dryer. Lift the appliance
and slide backwards so that the
appliance front feet slides under
foot locking brackets.
15. For tumble dryer. Screw the rear
brackets (C) to the back of the
appliance by using the screws
removed in step 12 and adjust the
appliance feet if required.
16. Move the Pedestal/Appliance
assembly to its permanent
location. Use a spirit level to check
if the assembly is properly leveled.
If not leveled, adjust feet to level
properly.
17. Where included, you can insert
the additional container (F).
18. Connect the appliance as indicated
in the instructions supplied with the
appliance.
6
Environmental Concerns
Recycle the materials with the
symbol . Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances.
Do not dispose appliances marked
with the symbol with the household
waste.
Return the product to your local
recycling facility or contact your
municipal office.

5
6
Environmental Concerns
Recycle the materials with the
symbol . Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances.
Do not dispose appliances marked
with the symbol with the household
waste.
Return the product to your local
recycling facility or contact your
municipal office.

6
Note

7
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x 2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
Не поставяйте сушилня върху
пералната машина, ако използвате
поставка.
Поставката не може да се използва
със сушилни, само с перални машини.
• Размер
• Аксесоари
ВНИМАНИЕ!
ВНИМАНИЕ!
ВНИМАНИЕ! Не монтирайте
поставката сами.
ВНИМАНИЕ! Преди да пристъпите
към монтажа, се уверете, че има
достатъчно място.
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
(A) 2 предни метални скоби.
(B) 2 задни скоби за перална машина.
(C) 10 винта.
(D) 1 гаечен ключ за регулиране
на нивелиращите крачета.
(E) 2 допълнителни контейнера
(когато са включени).
Информация за
безопасност Продукт и аксесоари
Информация
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x 2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)

8
4
8. For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9. For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
11. For washing machine. Put the
pedestal and appliance in vertical
position. If necessary, adjust the
appliance feet and go to step 16.
Check that the screws are firmly
screwed.
12. For tumble dryer. Unscrew and
retain the two bottom screws from
the back of the appliance.
10. For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washer
and the pedestal.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.
Извадете поставката и всички
аксесоари от кутията.
Уверете се, че задните гумени
крачета са поставени.
Регулирайте предните крачета, за
да направите поставката стабилна.
Ако монтирате поставката под
чисто нов уред, разопаковайте
уреда, както е посочено в
инструкциите, приложени към
него и след това преминете към
стъпка 6.
Ако уредът е вече свързан:
- Изключете захранващия кабел
от контакта.
- Затворете крана за водата.
- Откачете подаващия(ите)
маркуч(и) от крана за водата
и оставете водата да се изтече
от подаващия(ите) маркуч(и) и
изпускателния маркуч в някой
плитък съд.
Процедура по
монтиране
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Завийте предните скоби върху
поставката.
Внимателно положете пералната
машина върху страната й, на която
е разположен дозаторът за
перилни препарати.
Положете я върху картон или върху
парче стиропор, за да избегнете
надраскване по корпуса.
Регулирайте крачетата на уреда
на подходяща височина, за да
може да се плъзне под скобите за
блокиране на крачетата.

9
4
8. For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9. For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
11. For washing machine. Put the
pedestal and appliance in vertical
position. If necessary, adjust the
appliance feet and go to step 16.
Check that the screws are firmly
screwed.
12. For tumble dryer. Unscrew and
retain the two bottom screws from
the back of the appliance.
10. For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washer
and the pedestal.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.
9.
10.
11.
12.
13.
14.
4
8. For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9. For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
11. For washing machine. Put the
pedestal and appliance in vertical
position. If necessary, adjust the
appliance feet and go to step 16.
Check that the screws are firmly
screwed.
12. For tumble dryer. Unscrew and
retain the two bottom screws from
the back of the appliance.
10. For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washer
and the pedestal.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.
5
14. For tumble dryer. Lift the appliance
and slide backwards so that the
appliance front feet slides under
foot locking brackets.
15. For tumble dryer. Screw the rear
brackets (C) to the back of the
appliance by using the screws
removed in step 12 and adjust the
appliance feet if required.
16. Move the Pedestal/Appliance
assembly to its permanent
location. Use a spirit level to check
if the assembly is properly leveled.
If not leveled, adjust feet to level
properly.
17. Where included, you can insert
the additional container (F).
18. Connect the appliance as indicated
in the instructions supplied with the
appliance.
5
14. For tumble dryer. Lift the appliance
and slide backwards so that the
appliance front feet slides under
foot locking brackets.
15. For tumble dryer. Screw the rear
brackets (C) to the back of the
appliance by using the screws
removed in step 12 and adjust the
appliance feet if required.
16. Move the Pedestal/Appliance
assembly to its permanent
location. Use a spirit level to check
if the assembly is properly leveled.
If not leveled, adjust feet to level
properly.
17. Where included, you can insert
the additional container (F).
18. Connect the appliance as indicated
in the instructions supplied with the
appliance.
Положете поставката на същата
страна и я плъзнете напред, така
че предните крачета на уреда да се
плъзнат под скобите за блокиране
на крачетата.
Използвайте приложените винтове,
за да затегнете задните скоби
(B), както на пералнята, така и на
поставката.
Поставете поставката и уреда
във вертикално положение.
Ако е необходимо, регулирайте
крачетата на уреда и преминете
към стъпка 16. Уверете се, че
винтовете са здраво затегнати.
Преместете монтираната
поставка с уреда на постоянното
й местоположение. Използвайте
нивелир, за да проверите
дали поставката и уреда са
нивелирани добре. Ако не са
добре нивелирани, регулирайте
крачетата, докато ги изравните
правилно.
Можете да поставите
допълнителния контейнер (F), ако
е включен.
Свържете уреда, както е посочено
в инструкциите, предоставени с
уреда.

10
12
Грижа за околната среда
Рециклирайте материалите със
символа . Поставете
опаковката в подходящ контейнер,
за да бъде рециклирана.
Помогнете за опазването на
околната среда и здравето на
хората, както и за рециклирането
на отпадъци от електрически и
електронни уреди.
Не изхвърляйте уреди, отбелязани
със символа заедно с битовите
отпадъци.
Върнете продукта в местно
съоръжение за рециклиране
или се свържете със
службата на Вашата община.

11
Забележка

12
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x 2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x 2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
Nestavte sušičku na pračku, pokud
používáte podstavec.
Podstavec nelze použít spolu
s bubnovými sušičkami, pouze
s pračkami.
• Rozměry
• Příslušenství
VAROVÁNÍ!
VAROVÁNÍ!
VÝSTRAHA! Neinstalujte bez
pomoci.
VÝSTRAHA! Před zahájením
instalace se ujistěte, že máte
dostatek místa.
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x 2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
(A) 2 přední kovové držáky.
(B) 2 zadní držáky pro pračku.
(C) 10 šroubů.
(D) 1 klíč k nastavení seřiditelných nožiček.
(E) 2 dodatečné boxy (dle výbavy).
Bezpečnostní informace Výrobek a příslušenství
Poznámka
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)

13
Vyjměte podstavec a všechno přísl-
ušenství z krabice.
Ujistěte se, že jsou namontovány
zadní pryžové nožičky.
Nastavte přední seřiditelné nožičky,
aby byl podstavec stabilní.
Pokud podstavec instalujete pod zcela
nový spotřebič, vybalte spotřebič dle
dodaných pokynů a poté pokračujte
krokem 6.
Je-li spotřebič již zapojený:
- Vytáhněte zástrčku ze zásuvky.
- Zavřete vodovodní kohoutek.
- Odpojte napájecí hadice od
vodovodního kohoutku, z hadic
nechte vytéct všechnu vodu
a zachyťte ji do nízké nádoby.
Pokyny k instalaci
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Našroubujte přední držáky
na podstavec.
Pro pračky. Šetrně položte pračku na
stranu dávkovače pracího prostředku.
Položte ji na karton nebo kus
polystyrenu, abyste zabránili
poškrábání skříně.
Nastavte seřiditelné nožičky
spotřebiče na vhodnou výšku,
abyste ho mohli zasunout pod
zajišťovací držáky nožiček.
Položte podstavec na stejnou stranu a
zasuňte jej směrem dopředu tak, aby
se přední nožičky spotřebiče zasunuly
pod zajišťovací držáky nožiček.
4
8. For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9. For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
11. For washing machine. Put the
pedestal and appliance in vertical
position. If necessary, adjust the
appliance feet and go to step 16.
Check that the screws are firmly
screwed.
12. For tumble dryer. Unscrew and
retain the two bottom screws from
the back of the appliance.
10. For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washer
and the pedestal.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.
4
8. For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9. For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
11. For washing machine. Put the
pedestal and appliance in vertical
position. If necessary, adjust the
appliance feet and go to step 16.
Check that the screws are firmly
screwed.
12. For tumble dryer. Unscrew and
retain the two bottom screws from
the back of the appliance.
10. For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washer
and the pedestal.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.

14
Použijte dodané šrouby k zajištění
zadních držáků (B) jak na pračce,
tak na podstavci.
Je-li součástí výbavy, můžete vložit
dodatečný box (F).
Zapojte spotřebič dle pokynů
dodaných s tímto spotřebičem.
10. 13.
14.
Položte podstavec a spotřebič do
svislé polohy. V případě nutnosti
nastavte seřiditelné nožičky a přejděte
na krok 16. Zkontrolujte, zda jsou
šrouby pevně dotažené.
Přesuňte sestavu podstavce se
spotřebičem na trvalé místo. Pomocí
vodováhy zkontrolujte, zda je
sestava řádně vyrovnaná. Pokud
není vyrovnaná, nastavte seřiditelné
nožičky na vyrovnanou úroveň.
11.
12.
4
8. For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9. For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
11. For washing machine. Put the
pedestal and appliance in vertical
position. If necessary, adjust the
appliance feet and go to step 16.
Check that the screws are firmly
screwed.
12. For tumble dryer. Unscrew and
retain the two bottom screws from
the back of the appliance.
10. For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washer
and the pedestal.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.
5
14. For tumble dryer. Lift the appliance
and slide backwards so that the
appliance front feet slides under
foot locking brackets.
15. For tumble dryer. Screw the rear
brackets (C) to the back of the
appliance by using the screws
removed in step 12 and adjust the
appliance feet if required.
16. Move the Pedestal/Appliance
assembly to its permanent
location. Use a spirit level to check
if the assembly is properly leveled.
If not leveled, adjust feet to level
properly.
17. Where included, you can insert
the additional container (F).
18. Connect the appliance as indicated
in the instructions supplied with the
appliance.
5
14. For tumble dryer. Lift the appliance
and slide backwards so that the
appliance front feet slides under
foot locking brackets.
15. For tumble dryer. Screw the rear
brackets (C) to the back of the
appliance by using the screws
removed in step 12 and adjust the
appliance feet if required.
16. Move the Pedestal/Appliance
assembly to its permanent
location. Use a spirit level to check
if the assembly is properly leveled.
If not leveled, adjust feet to level
properly.
17. Where included, you can insert
the additional container (F).
18. Connect the appliance as indicated
in the instructions supplied with the
appliance.
18
Dopad na životní prostředí
Recyklujte materiály označené
symbolem . Obaly vyhoďte do
příslušných odpadních kontejnerů
k recyklaci. Pomáhejte chránit
životní prostředí a lidské zdraví a
recyklovat elektrické a elektronické
spotřebiče určené k likvidaci.
Spotřebiče označené příslušným
symbolem nelikvidujte spolu
s domovním odpadem.
Spotřebič odevzdejte v místním
sběrném dvoře nebo kontaktujte
místní úřad.

15
18
Dopad na životní prostředí
Recyklujte materiály označené
symbolem . Obaly vyhoďte do
příslušných odpadních kontejnerů
k recyklaci. Pomáhejte chránit
životní prostředí a lidské zdraví a
recyklovat elektrické a elektronické
spotřebiče určené k likvidaci.
Spotřebiče označené příslušným
symbolem nelikvidujte spolu
s domovním odpadem.
Spotřebič odevzdejte v místním
sběrném dvoře nebo kontaktujte
místní úřad.

16
Poznámka

17
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x 2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x 2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
Du må ikke anbringe en tørretumbler
oven på vaskemaskine, hvis du bruger
en sokkel.
Soklen kan ikke anvendes til
tørretumblere, kun til vaskemaskiner.
•Mål
•Tilbehør
ADVARSEL!
ADVARSEL!
ADVARSEL!
Udfør ikke installationen alene.
ADVARSEL! Sørg for, at der er
nok plads, før du fortsætter med
installationen.
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
(A) 2 frontbeslag af metal
(B) 2 bagbeslag til vaskemaskine.
(C) 10 skruer.
(D) 1 gaffelnøgle til justering
af nivelleringsfødder.
(E) 2 ekstra beholdere (når de medfølger)
Sikkerhedsoplysninger Produkt og tilbehør
Oplysninger
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x 2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)
2
Safety Information Product & Accessories
WARNING!
Do not stack a dryer on top of washing
machine if using a pedestal.
Information
Dimension
1000 mm
595 mm
535 mm
305 mm
Accessories
WARNING! Do not install it alone.
(A) (B) (C)
2x 2x
2x
(D)
10x
(E)
1x
(F)
2x
WARNING! Before proceeding
with installation, make sure there
is enough room.
(A)
(B)
(C)
(D)
(E)
(F)
2 front metal brackets.
2 rear brackets for washing machine.
2 rear brackets for tumble dryer.
10 screws. (For tumble dryer
8 screws will be sufficient.)
1 spanner to adjust the levelling feet.
2 additional containers
(where included)

18
4
8. For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9. For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
11. For washing machine. Put the
pedestal and appliance in vertical
position. If necessary, adjust the
appliance feet and go to step 16.
Check that the screws are firmly
screwed.
12. For tumble dryer. Unscrew and
retain the two bottom screws from
the back of the appliance.
10. For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washer
and the pedestal.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.
Fjern soklen og alt tilbehør
fra kassen.
Sørg for, at de bageste gummifødder
er monteret.
Justér de forreste fødder, så soklen
bliver stabil.
Hvis du installerer soklen under et helt
nyt apparat, skal du udpakke appa-
ratet som angivet i den medfølgende
vejledning og fortsætte med trin 6.
Hvis apparatet allerede er tilsluttet:
- Tag stikket ud af stikkontakten.
- Luk for vandhanen.
- Frakobl indløbsslangen fra
vandhaven, og lad vandet løbe ud
af indløbsslangen og aøbsslangen,
og opsaml det i en balje.
Installationsprocedure
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
3
Installation Procedure
1. Remove the pedestal and all
accessories form the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) from
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on cardboard or on a piece
of polystyrene to avoid scratching
the cabinet.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Skru frontbeslagene på soklen
Læg forsigtigt vaskemaskinen på
siden med vaskemiddeldispenseren.
Læg den på karton eller et stykke
polystyren for at undgå at ridse
kabinettet.
Justér apparatets fødder til en
passende højde, så det kan glide ind
under fodlåsebeslagene.
Læg soklen på samme side,
og skub den fremad, så apparatets
frontfødder glider ind under
fodlåsebeslagene.
4
8. For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9. For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
11. For washing machine. Put the
pedestal and appliance in vertical
position. If necessary, adjust the
appliance feet and go to step 16.
Check that the screws are firmly
screwed.
12. For tumble dryer. Unscrew and
retain the two bottom screws from
the back of the appliance.
10. For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washer
and the pedestal.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.

19
10.
11.
12.
13.
14.
4
8. For washing machine. Adjust the
appliance adjustable feet at a
suitable height to allow it to slide
under the foot locking brackets.
9. For washing machine. Lay the
pedestal on the same side and
slide it forward so that the
appliance front feet slides under
foot locking brackets.
11. For washing machine. Put the
pedestal and appliance in vertical
position. If necessary, adjust the
appliance feet and go to step 16.
Check that the screws are firmly
screwed.
12. For tumble dryer. Unscrew and
retain the two bottom screws from
the back of the appliance.
10. For washing machine. Use the
screws supplied to secure the rear
brackets (B) on both the washer
and the pedestal.
13. For tumble dryer. Screw the rear
brackets (C) on the pedestal by
using the screws supplied in the
stand box.
5
14. For tumble dryer. Lift the appliance
and slide backwards so that the
appliance front feet slides under
foot locking brackets.
15. For tumble dryer. Screw the rear
brackets (C) to the back of the
appliance by using the screws
removed in step 12 and adjust the
appliance feet if required.
16. Move the Pedestal/Appliance
assembly to its permanent
location. Use a spirit level to check
if the assembly is properly leveled.
If not leveled, adjust feet to level
properly.
17. Where included, you can insert
the additional container (F).
18. Connect the appliance as indicated
in the instructions supplied with the
appliance.
5
14. For tumble dryer. Lift the appliance
and slide backwards so that the
appliance front feet slides under
foot locking brackets.
15. For tumble dryer. Screw the rear
brackets (C) to the back of the
appliance by using the screws
removed in step 12 and adjust the
appliance feet if required.
16. Move the Pedestal/Appliance
assembly to its permanent
location. Use a spirit level to check
if the assembly is properly leveled.
If not leveled, adjust feet to level
properly.
17. Where included, you can insert
the additional container (F).
18. Connect the appliance as indicated
in the instructions supplied with the
appliance.
Brug de medfølgende skruer til at
fastgøre de bageste beslag (B) på
både vaskemaskinen og soklen.
Rejs soklen og apparatet op i lodret
position. Justér om nødvendigt
apparatets fødder, og gå til trin 16,
Kontrollér, at skruerne er spændt.
Flyt soklen/apparatet til sin perma-
nente placering. Brug et vaterpas til
at kontrollere, at enheden er i vater.
Justér fødderne, hvis dette ikke er
tilfældet.
Hvis der medfølger en ekstra
beholder, kan du indsætte denne (F).
Tilslut apparatet som angivet i den
medfølgende vejledning.

20
24
Miljøhensyn
Genbrug materialerne med
symbolet . Anbring emballagen i
relevante beholdere for at genbruge
den. Hjælp med at beskytte miljøet
og sundheden og med henblik på at
genbruge affald fra elektriske og
elektroniske apparater.
Apparater, der er mærket med
symbolet , må ikke bortskaffes
sammen med husholdningsaffald.
Returnér produktet til den lokale
genbrugsstation, eller kontakt
kommunen.