Electrolux AES II CARAVAN User manual

M
ANUAL
C
40/ 110
8
21 2647.12
T
.B. 8 '97
C
ARAVAN
R
M 4185 RM 4365
R
M 4215 RM 4405
R
M 4235 RM 5215
R
M 4265 RM 5275
R
M 4275 RM 5405
R
M 4285
A
ES II
D
eutsch Seite 1
E
nglish page 7
F
rançais page 14
I
taliano pagina 20
E
spañol pagina 26
S
venska sida 32
D
ansk side 38
N
orsk side 44
N
ederlands pag. 50
S
uomi sivu 57

I
NTRODUCTION
W
e are pleased that you have chosen this refrigerator and
h
ope you will derive much satisfaction from using it, but first
a
few well-meant words of advice:
I
t is important to read through these instructions carefully
b
efore using the refrigerator.
T
o ensure good refrigeration and economical operation, the
r
efrigerator must be installed and used as described in
t
hese instructions.
T
he refrigerator is designed for building-in to leisure
v
ehicles such as caravans or motorhomes.
T
he appliance is certified according to the EU-Gas-Directive
9
0/396/EEC.
T
his refrigerator comes with an
Automatic Energy Selector
w
hich controls operation and energy supply. To put the
r
efrigerator in operation, just trip the main switch - AES
m
anages the rest.
T
RANSIT DAMAGE
I
nspect the refrigerator for damage. Transit damage must
b
e reported to whoever is responsible for delivery not later
t
han seven days after the refrigerator was delivered.
D
ATA PLATE
C
heck the data plate, inside the refrigerator, to ensure that
y
ou have received the right model.
T
he data plate contains e. g. the following details:
Model designation RM .....................
Product number ...........................
Serial number .............................
S
ince these details will be needed if you have to contact
s
ervice personnel, it is a good idea to make a note of them
h
ere.
C
ONTENTS
O
PERATING INSTRUCTIONS .....................8
CONTROLS.....................................8
STARTING THE REFRIGERATOR .............8
SWITCHING BETWEEN ENERGY SOURCES .8
WINTER OPERATION ..........................8
REGULATING THE TEMPERATURE...........8
TRAVEL CATCH................................9
FOOD STORAGE ...............................9
ICE-MAKING....................................9
DEFROSTING...................................9
CLEANING THE REFRIGERATOR .............9
TURNING OFF THE REFRIGERATOR .........9
IF THE `FRIDGE FAILS TO WORK.............9
GUARANTEE AND SERVICE................. 10
MAINTENANCE............................... 10
I
NSTALLATION INSTRUCTIONS................ 10
REPOSITIONING THE HINGES .............. 10
INSTALLATION /BUILDING-IN ............... 10
VENTILATION OF THE UNIT ................. 10
LP GAS CONNECTION....................... 11
ELECTRICAL CONNECTION................. 11
INTERIOR LIGHT -BULB -CHANGE.......... 12
TECHNICAL DATA ........................... 13
O
PERATING AND INSTALLATION INSTRUCTIONS
F
OR ELECTROLUX REFRIGERATORS
7

O
PERATING INSTRUCTIONS
C
ONTROLS
T
his refrigerator is equipped with an Automatic Energy
S
elector (AES) which controls its operation and energy
s
upply.
T
he system selects the available energy source in the order
2
30/240 V – 12 V – LP gas. No manual operation is neces-
s
ary for selecting the energy source.
T
he control panel is shown in fig. 3.
T
he refrigerator is set into operation by pushing button (A)
(
main switch). The AES LED (C) lights green showing: AES
s
ystem working. Push- button (B) is used for setting the
e
lectronic thermostat. The thermostat LEDs (D) show the
c
hoosen temperature position. When there is a demand for
r
efrigeration, AES will connect the most favourable of the
a
vailable energy sources.
N
ote: 12 V must always be available to supply the electro-
n
ics.
S
TARTING THE REFRIGERATOR
A
ll references are to fig. 3.
L
P Gas operation
W
hen the system chooses LP Gas operation, the flame
f
ailure device is automatically opened, allowing the gas to
f
low to the burner. At the same time, the electronic igniter is
e
nergized.
A
fter initial installation, servicing, or changing gas cylinders
e
tc., the gas pipes may contain some air which should be
a
llowed to escape by briefly turning on the refrigerator or
o
ther appliances. This will ensure that the flame lights
i
mmediately.
I
f the flame goes out (by gust of wind etc), the igniter is
i
mmediately activated and reignites the gas.
N
ote: the control electronics and the igniter must have a
D
C (battery) supply to operate.
G
as trouble-shooting
I
f the AES LED (C) is flashing red, the system was not able
t
o start or continue gas operation. Set the switch (A) to 0
a
nd check that there is enough gas in the gas bottle, that its
v
alve is open and that any valves in the gas line to the
r
efrigerator are open.
T
hen push button (A) to "ON" again. After 10 sec. AES will
r
epeat the ignition sequence. When the AES LED (C) again
s
tarts flashing red after 30 sec, the trouble persists (air in
t
he line, no gas?). Switch (A) briefly off and then on again. It
m
ight be necessary to repeat this operation 3-4 times if the
t
ubing contains air (after changing gas bottles, repairs etc).
I
f this does not help, you should consult a service tech-
n
ician.
2
30 V Operation
W
hen a mains connection is available, AES will select this.
P
lease note, that even being in AC mode, 12 V DC is nec-
c
essary for the internal supply of the electronics.
1
2 V operation
A
ES will select the 12 V mode of operation only when the
v
ehicle engine is running (detected by the alternator con-
n
ection of the fridge).
S
WITCHING BETWEEN ENERGY
S
OURCES
W
hen switching from one energy source to another, there
a
re some delays implemented in the AES system.
T
he 15 min. delay between switching off the engine and
s
tarting gas mode is intended to to delay the starting of gas
m
ode e.g. when stopping at a filling station.
U
ndervoltage operation
T
he AES system is designed to guarantee the maximum
c
ooling efficiency under any circumstances. Therefore, the
s
ystem monitores continously the voltage level while being
i
n either 12 V DC or 230 V AC mode. If the voltage is too
l
ow, the system switches to Gas mode shown by the yellow
L
ED (E in fig.3). The system stays in Gas mode, until the
e
lectrial supply voltage has recovered to the normal level.
W
INTER OPERATION
P
lease check that the ventilation grilles or the flue outlet are
n
ot blocked by snow, leaves etc.
E
LECTROLUX ventilation grilles A 1620 (fig. 2), can be
f
itted with winter covers, model WA 120, to protect the
c
ooling unit against cold air. The covers may be fitted when
t
he outside temperature is below approx. 10°C and should
b
e fitted when the temperature is below the freezing point.
W
e suggest that you fit the winter covers also in the case
t
hat the vehicle is laid up during the winter months.
R
EGULATING THE TEMPERATURE
T
he position number refers to fig. 3.
I
t will take a few hours for the refrigerator to reach normal
o
perating temperature. So we suggest you start it well in
a
dvance of a trip and if possible store it with precooled
f
oodstuffs.
T
he temperature of the refrigerator main compartment is set
Nevertheless it is not allowed to have a naked
flame at a gas filling station. If you are not sure, that
your stop is shorter than 15 min., you are advised to
switch off the main switch (A), fig. 3, when stopping
at a filling station.
AES will select LP gas operation under the following
conditions:
●No AC (230 V) available
●Engine not running (no high current at 12 VDC available)
●AC available but too low
●Engine running but DC supply too low
(condition three and four are briefly described in item
Undervoltage operation)
8

f
or all three sources of energy, by means of the thermostat
k
nob (B). After turning on the refrigeratior the system auto-
m
atically chooses the mid- position. With some experience
y
ou will soon find a suitable setting. This normally does not
n
eed resetting because the same thermostat controls the
m
ain compartment temperature for any of the three sources
o
f energy.
T
RAVEL CATCH
M
ake sure that the travel catch is engaged when the
c
aravan is on the move, (fig. 1).
T
he travel catch at the top of the door can be set in two
d
ifferent positions. In one position the door is held tightly
s
hut. In the other position the door is secured ajar so that
t
he refrigerator can be aired when not in use.
F
OOD STORAGE
A
lways keep food in closed containers. Never put hot food
i
n the refrigerator; allow it to cool first.
N
ever keep items in the refrigerator which might give
o
ff flammable gases.
T
he 2-star (**) frozen food compartment is intended for the
s
torage of frozen food and for making ice. It is not suitable
f
or freezing items of food.
N
ever put bottles or cans of fizzy drinks in the frozen food
s
torage compartment as they may burst when freezing. Also
d
on't give children ice lollies straight from the frozen food as
t
hey could cause frost burns.
M
ost kinds of frozen food can be stored in the frozen food
c
ompartment for about a month. This period of time may
v
ary, however, and it is important to follow the instructions
o
n the individual packets.
I
CE MAKING
I
t is practical to make ice during the night – then the refrige-
r
ator is less demanded and the cooling unit has more reser-
v
es. Fill the ice tray to just below the brim with drinking
w
ater and place it on the freezer shelf.
T
o speed up the ice making, one can spill one or two
s
poonfuls of water on the freezer shelf to improve the con-
t
act to the ice tray. If you have more than one ice tray it is a
g
ood idea to make ice in advance and save the frozen trays
i
n the frozen food compartment.
D
EFROSTING
F
rost will gradually accumulate on the refrigerating surfaces.
I
t must not be allowed to grow too thick as it acts as an
i
nsulator and adversely affects refrigerator performance.
C
heck the formation of frost regularly every week and when
i
t gets about 3 mm thick, defrost the refrigerator.
T
o defrost the `fridge, turn it off and remove the ice tray and
a
ll food items. Warning: normally the temperature of items
o
f fozen foods would rise unduly during defrosting and so
t
hey should be consumed within 24 h or discarded.
D
o not try to accelerate defrosting by using any kind of
h
eating appliance, as this might damage the plastic surfa-
c
es of the refrigerator. Neither should any sharp objects be
u
sed to scrape off the ice.
T
he defrost water runs from a collector channel to a
r
eceptacle at the rear of the refrigerator where it
e
vaporates. Defrost water in the freezer compartment
s
hould be mopped up with a cloth.
W
hen the ice has melted, wipe the refrigerator dry and
r
estart it. Place the food items back inside but wait until the
r
efrigerator is cold before making ice cubes.
C
LEANING THE REFRIGERATOR
C
lean the inside of the refrigerator regularly to keep it fresh
a
nd hygienic.
S
oak a cloth in a solution consisting of a teaspoon of bicar-
b
onate of soda to half a litre of warm water. Wring out the
c
loth and use it to clean the interior of the refrigerator and
i
ts fittings.
N
ever use detergents, scouring powder, strongly scented
p
roducts or wax polish to clean the interior of the refrigera-
t
or as they may damage the surfaces and leave a strong
o
dour.
T
he exterior of the refrigerator should be wiped clean now
a
nd again, using a damp cloth and a small quantity of deter-
g
ent. But not the door gasket, which should only be cleaned
w
ith soap and water and then thoroughly dried.
T
he cooling unit behind the refrigerator should be cleaned
w
ith a brush from time to time, but make sure that the
r
e-frigerator is switched off when doing this.
T
URNING OFF THE REFRIGERATOR
I
f the refrigerator is not to be used for some time:
1
. Set the switch (A), fig. 3, to "OFF".
2
. Shut off any on-board valve in the gas line to the refrige-
rator.
3
. Empty the refrigerator. Defrost and clean it as described
earlier. Leave the doors of the refrigerator and the frozen
food compartment ajar. Use the travel catch to hold in
this position.
4
. When the vehicle is laid up for a long period of time (e.g.
during the winter months), we suggest fitting the winter
covers WA 120, fig. 2, onto the vent grills.
I
F THE `FRIDGE FAILS TO WORK
C
heck the following points before calling a service -
t
echnician:
1
. that the green AES LED goes on, when the switch (A) is
set to "ON" (12 V must be available).
2
. when mains are connected but the fridge stays in gas
oeration: Is the refrigerator correctly connected and is the
fuse intact?
3
. in transit, if the fridge does not operate in DC mode: Is
the alternator (D+) connection made correctly ?
4
. if the AES LED flashes red: see chapter Gas Trouble-
Shooting.
I
f the refrigerator is not cold enough it may be because:
1
. The ventilation is inadequate owing to reduced area of
the ventilation passages (partial blockage of grilles from
wire mesh etc).
2
. The evaporator is frosted up.
3
. The temperature control setting is incorrect.
4
. The gas pressure is incorrect – check the pressure regu-
lator at the gas container.
9

5
. The ambient temperature is too high.
6
. To much food is loaded at one time.
7
. The door is not properly closed or the magnetic sealing
strip is defective.
I
f the refrigerator still does not work properly, call a service
t
echnician.
T
he sealed cooling system must not be opened, since it
i
s under high pressure.
G
UARANTEE AND SERVICE
T
he refrigerator is guaranteed for one full year on condition
t
hat it is used in a correct manner and in accordance with
t
hese operating and installation instructions.
I
t is also embraced by a European guarantee as described
i
n the brochure supplied with the refrigerator.
S
ervice and spare parts are obtainable from your dealer or
E
lectrolux – consult the telephone directory.
M
AINTENANCE
C
oncerning gas- and electric installations, only authorized
e
xperts are allowed to carry out maintenance and repair
w
orks. Besides, it is recommendable to contact an authori-
z
ed service if it comes to repair works.
A
ccording to the valid regulations G607 of DVGW, the gas
i
nstallation as well as the connect flue oulets are to be
c
hecked every two years by an expert (this has to be
a
rranged by the person responsible).
S
OME USEFUL HINTS
M
ake sure that:
●Defrosting is carried out periodically.
●The refrigerator is clean and dry with the door left open
when it is not to be used for some time.
●Liquids or items with a strong odour are well packaged.
●The ventilation openings are unobstructed.
●The door is secured by means of the travel catch when
the caravan is on the move.
I
NSTALLATION INSTRUCTIONS
R
EPOSITIONING THE HINGES
T
he door hinges can be moved to the opposite side in the
f
ollowing way:
●Unscrew the upper hinge pin, taking care not to lose the
set of washers and bushes.
●Lift the door from the lower hinge pin.
●Unscrew the pin and mount it on the opposite side hinge.
●Unscrew the travel catch and mount it on the opposite
side.
●Fit the door on the pin and reassemble the pin with
washers and bushes in its new place.
●Check that the door closes properly and seals all round.
I
NSTALLATION/BUILDING-IN
T
he refrigerator is intended for installation in a caravan or
m
otorhome, and the description relates to this application.
T
he refrigerator must not be exposed to radiated heat from
h
ot objects (e.g. below a cooker without proper heat shiel-
d
ing).
E
xcessive heat irradiation impairs performance and leads to
i
ncreased energy consumption. For this reason the refrige-
r
ator should be installed if possible not at the entrance side
o
f the vehicle – normally orientated south and often with an
a
wning which would impair the dispersion of heat and com-
b
ustion gases from the ventilation openings.
I
t is not a good practice to install the refrigerator so that the
v
ent openings are covered by the vehicle's entrance door
w
hen this is open. This would reduce the ventilation air flow
t
o the cooling unit and reduce refrigeration performance.
T
he enclosure
T
he refrigerator must be installed in an enclosure, the
d
imensions of which are shown in TECHNICAL DATA.
T
he bottom of the enclosure must be horizontal and even
s
o that the refrigerator can be easily pushed into place. It
m
ust be sturdy enough to carry the weight of the `fridge.
B
attens should be installed at the enclosure and fitted with
s
ealing strips, as shown in fig. 5. (Other suggestions for a
s
ealed installation are shown in a folder which can be
o
btained from Electrolux).
S
lide in the refrigerator until it is flush with the front of the
r
ecess. There must be 10-20 mm free space behind the
r
efrigerator.
F
our fasteners are fitted in plastic bushings in the side walls
o
f the fridge, fig. 8. They are used for securing the refrigera-
t
or in the enclosure.
T
he side walls of the enclosure and/or any wooden braces
i
nstalled to hold the refrigerator must be dimensioned to
s
eat the screws securely, also considering the forces due to
t
he movement of the vehicle.
W
ith the refrigerator in place, drive the screws through the
b
ushings in the lining of the refrigerator into the walls of the
e
nclosure. There must not be more than 3 mm of clearance
b
etween refrigerator and enclosure on each side. If neces-
s
ary, wooden strips or similar should be fitted.
N
ote: This is the only approved means of securing the
r
efrigerator to the enclosure and to the vehicle. Fasteners
p
enetrating other parts of the insulation (PU) foam of the
r
efrigerator might damage components like electric wiring
e
tc.
V
ENTILATION OF THE UNIT
A
t high ambient temperatures the refrigeration unit will only
p
erform adequately when properly ventilated.
T
he refrigeration unit is ventilated via two openings in the
w
all of the caravan (see fig. 6). Fresh air enters through the
l
ower opening and warm air is discharged through the upper
o
ne.
L
ocate the lower opening immediately above the floor of the
r
ecess, and the upper one as high as possible above the
c
ondenser (C) of the refrigeration unit, at least as shown in
f
ig. 7b but preferably as shown in fig. 7a.
10

V
entilation grilles
T
he openings in the caravan wall must be fitted with the
E
lectrolux Ventilation systems.
F
itting the grilles, model A 1620, fig.2, which were speci-
a
lly developed by Electrolux for this purpose. It is a good
i
dea to install the frame R 1640 (B in fig. 7a) at the same
t
ime. Then the grilles can be easily removed, which permits
i
nspection and small repairs to be carried out without the
n
ecessity for removing the refrigerator from the recess.
I
f there is no outer grille at floor level where leaking gas can
e
scape, a 40 mm hole to the outside should be made in the
f
loor of the recess to drain any unburnt gas to the outside.
F
it the hole with wire mesh and an angled plate to protect
f
rom stones, mud etc.
R
emoval of flue gases
T
he ventilation passage at the rear of the recess, between
t
he outer wall of the vehicle and the refrigerator (fig. 7a/b),
i
s sealed off against the living space, and so cold draughts
a
re excluded (winter camping) and no flue gases can
p
enetrate into the vehicle. Thus a special flue outlet is no
l
onger necessary – the gases are dispersed through the
u
pper vent grille.
N
ote: With this mode of installation the same type of grilles
(
without an integrated flue outlet), should be installed at the
u
pper as well as at the lower vent opening. The angled
T
-piece for the flue tube (when delivered) should not be
u
sed in this case.
T
he top of the enclosure above the flue tube (I), fig. 7a/b,
s
hould be covered with aluminum sheet metal, as indicated
i
n (B), to facilitate the heat dispersion.
I
n fig. 7 the letters have the following meaning:
A. Frame R 1640 for the grilles
B. Aluminum cladding
C. Condenser of cooling unit
D. Vent grill A 1620
E. Sealing profile (optional extra)
Width:
525 mm, part. nr. 295 1147-00
486 mm 295 1147-10
F. Refrigerator rear wall
G. Wooden batten 10 x 20 mm (see also fig. 5)
H. Height of the enclosure
(see TECHNICAL DATA)
I. Flue tube
K T-piece ("lazy tee")
L
P GAS CONNECTION
T
he refrigerator is designed for operation on LP gas, the
p
ressure of which must be 28 mbar for Butane and 37 mbar
f
or Propane. Check that this is stated on the data plate.
T
he refrigerator is not designed for operation on town gas
o
r natural gas.
T
he gas installation should only be carried out by an autho-
r
ized gas fitter. It is recommended that the gas pipe feeding
t
he refrigerator is so arranged that it is possible to turn off
t
he supply of the refrigerator. It must be of a type approved
f
or use with continuously operating bottled-gas appliances,
a
nd have threaded compression connections throughout.
P
USH-ON CONNECTIONS MUST NOT BE USED (We do
n
ot approve the use of "rubber" type flexible tubing for
c
onnecting permanently operating appliances of this type in
t
he United Kingdom). All connectors etc. should be of a type
s
pecifically designed for the type and diameter of the con-
n
ection pipe used, and screwed joints should be sealed with
a
joining compound approved for use with bottled gas.
T
he gas supply pipe should be connected to the gas inlet
p
ipe on the right hand side of the gas control valve by
m
eans of a suitable threaded compression coupling.
I
n making the connection to the refrigerator, a gas cock of
a
n approved type for use on LPG must be incorporated in
t
he supply line in a position which is readily accessible to
t
he user. For eventual servicing purposes, the union should
b
e on the outlet side of the cock and the pipework should
b
e positioned so as not to prevent the refrigerator from
b
eing readily withdrawn.
E
LECTRICAL CONNECTION
T
he electrical installation must be carried out in a proper
a
nd durable manner, taking into account all relevant regula-
t
ions and codes of practice. For mains voltage operation, it
i
s important that the circuit to and in the caravan is effec-
t
ively earthed. ALL MAINS VOLTAGE WIRING IN THE
C
ARAVAN MUST BE INSTALLED IN ACCORDANCE
W
ITH CURRENT I.E.E. REGULATIONS INCLUDING THE
U
SE OF AN OUTLET AND COUPLER TO BS4343/-
C
EE17.
F
or connection to a 230 V electricity supply, the refrigerator
h
as a 3-core mains lead which is intended for connection to
a
properly earthed plug and socket outlet. The socket outlet
s
hould be fitted in the caravan in a position readily accessi-
b
le to the user, within reach of the mains lead. In the United
K
ingdom, the plug and socket outlet should be of the non-
r
eversible type.
I
MPORTANT: The wires in the mains lead of this appliance
a
re coloured in accordance with the following code:
G
REEN-AND-YELLOW = EARTH
B
LUE = NEUTRAL
B
ROWN = LIVE
A
s the colours of the wires may not correspond with the
c
oloured markings identifying the terminals in your plug, in
t
he United Kingdom, proceed as follows:
T
he wire which is coloured GREEN-AND-YELLOW must be
c
onnected to the terminal in the plug which is marked with
t
he letter E or by the earth symbol or coloured green or
g
reen-and-yellow.
T
he wire which is coloured BLUE must be connected to the
t
erminal which is marked with the letter Nor coloured black.
T
he wire which is coloured BROWN must be connected to
t
he terminal which is marked with the letter Lor coloured
r
ed.
11

W
ARNING! THIS APPLIANCE MUST BE EARTHED.
I
n the United Kingdom, the plug or circuit to the refrigerator
m
ust be fitted with a fuse not greater than 5 amps. If a 13
a
mp.(B.S.1363) fused plug is used, it should be fitted with a
3
amp. fuse. In other countries, the fuse rating will depend
u
pon the voltage and local practice.
2
30 V Supplies.
C
heck that the voltage stated on the data plate is the same
a
s the mains voltage in use (230 V).
1
2 V and "D+" Connection
T
he 12 V connection of the refrigerator is shown in fig. 10.
T
he (+12V) and (-) pole have to be connected directly to the
a
uxiliary (house) battery. Do not use the chassis for the
r
eturn lead. The battery cable must not be connected to a
v
oltage controller or similar device as the AES itself moni-
t
ors the battery voltage. A relay cutting out 12 V operation
w
hen the ignition key is turned off, is not recommended.
A
ll splices should be screwed or soldered to keep voltage
d
rop to a minimum. The positive conductor must be protec-
t
ed by a 16 A fuse.
T
he connection D+(alternator) has to be connected to
t
he corresponding outlet of the vehicles electrical
s
ystem.
C
ross- sections
T
he D+(alternator) connection does not carry high current,
t
herefore it is no need to use a high cross- section cable.
F
or the 12 V (+) and (-) leads, we recommend a 6 mm2
w
ire. Up to a length a 5 m, 4 mm2might be sufficient as
w
ell.
I
NTERIOR LIGHT- BULB- CHANCE
I
f a bulb has to be replaced, proceed as follows:
1
. Remove cover of the lamp.
2
. Put a small screw driver between the case of the lamp
and the lamp cover and remove lamp cover.
3
. Turn bulb socle for 90 degrees and remove it.
4
. Put in new buld and turn it again for 90 degrees.
5
. Install lamp cover on the lamp case.
Electrical leads must be routed and secured so that
they cannot come into contact with hot or sharp parts
of the refrigerator.
Please consult a specialist, if you are not familiar with
the 12 V electrical system in your motorhome.
12

T
ECHNICAL DATA
RM 4185 4215 4235 4265 4275 4285 4365 4405
RM *5215 *5275 5405*
O
verall dimensions, refrigerator
Height (incl.controls) 595 618 821 821 821 821 821 805 mm
Width 401 486 486 486 486 486 486 525 mm
Depth (incl.cooling unit)
without door 427 435 435 435 495 435 495 495 mm
with door 461 474 474 474 534 474 533 533 mm
R
ecess dimensions
Height 597 620 825 825 825 825 825 810 mm
Width 405 490 490 490 490 490 490 530 mm
Depth 442 450 450 450 505 450 510 510 mm
Step (wheel house)
Height 220 220
Width 490 490
Depth 225 225
C
apacity
gross 40 60 70 70 77 81 89 103 lit
net 36 51 60 60 72 77 83 92 lit
frozen food compt. - 6 5 6,5 7 5 7 12 lit
W
eight (without packaging) 16,5 20 23 23 23 23 26 30 kg
E
lectrical data
Input 230 V 105 105 105 125 125 125 135 135 watt
12 V 100 100 100 120 120 120 130 130 watt
*
*Energy consumption (in 24h) 1,9 2,3 2,3 2,5 2,5 2,5 2,7 2,7 kWh
*2,1 *2,3 *2,3 kWh
L
P gas data
Input, max. 186 186 186 232 232 232 232 232 watt
E
nergy consumption (24h) 240 240 240 270 270 270 270 270 g
*210 *230 *230 g
C
ooling medium Ammoniak
*
* Power consumption at an anual ambient temperature of 25°C.
T
echnical details may change without notice.
13