Electrolux Unilux ULX110 User manual

Universal Laundry Pedestal
with Locking Drawer
Convenient height and safe storage
ULX110
AEG
Electrolux
Simpson
Ariston
BEKO
Bosch
Euromaid
Fisher & Paykel
Gorenje
Haier
LG
Miele
Samsung
Siemens
SMEG
Whirlpool
GET IN TOUCH WITH US
For more information on all UNILUX
accessories, phone or email our customer
care teams
AUSTRALIA
1300 363 640
[e-mail]
uniluxaccessories.com.au
INSTALL
SUITABLE FOR MOST BRANDS INCLUDING:
TIPS/ FEATURES
• Clever and safe large storage drawer.
• Convenient height when working for loading and unloading.
• Suitable for Front Load washers, Dryers, and washer/Dryer
combo’s up to 60cm x 60cm in dimensions.
• Do not stack a dryer on top of washing machine if using a
pedestal.
• Do not install it alone.
• Before proceeding with installation, make sure there is
enough room.
NEW ZEALAND
0800 234 234
[e-mail]
uniluxaccessories.co.nz
UNILUX IS PART OF THE
ELECTROLUX FAMILY
DESCRIPTION
The pedestal raises your front load washer or dryer to a perfect height, which means a better working height when loading
or unloading your laundry. You can never have enough storage. The Unilux pedestal opens up to reveal a large storage
drawer, perfect for all your laundry essentials, so you can keep your laundry neat and tidy.
UNILUX is a trademark of Aktiebolaget Electrolux. All Rights Reserved.
© 2019 Electrolux Home Products Pty Ltd. UDIG_ULX110_PP_Jul19
CONTENTS
The following items are included in the kit.
4 x locking brackets
4 x adjustable feet with lock nuts
4 x bolts
4 x spring washers
4 x flat washers
2 x keys
1 x installation instructions
595 mm
595 mm
320 mm
1050 mm
A
B
C
D
E
F
MONEY BACK GUARANTEE
BUY ACCESSORIES
SUPPORT
PRODUCTS

GET IN TOUCH WITH US
For more information on all UNILUX
accessories, phone or email our customer
care teams
AUSTRALIA
1300 363 640
[e-mail]
uniluxaccessories.com.au
NEW ZEALAND
0800 234 234
[e-mail]
uniluxaccessories.co.nz
UNILUX IS PART OF THE
ELECTROLUX FAMILY UNILUX is a trademark of Aktiebolaget Electrolux. All Rights Reserved.
© 2019 Electrolux Home Products Pty Ltd. UDIG_ULX108_PP_Jul19
INSTALLATION
1. Remove the pedestal and all accessories from the box.
2. Fit the four (4) feet to the pedestal and adjust to make it stable.
3. If you install the pedestal under a brand new appliance,
unpack the appliance as indicated in the instructions supplied
with it then proceed with step 5.
4. If the appliance is already connected:
- Disconnect the mains plug from the mains socket.
- For washing machine. Close the water tap. -
For washing machine. Disconnect the inlet hose(s) from the water
tap and let the water flow out from the inlet hose(s) and the drain
hose and collect it in a shallow basin.
- For tumble dryer. Empty the water container in a wash basin
or, if available, activate the direct drain system to let the
water flow out.
5. Fit the locking brackets.
a. Assemble the bolt C, spring washer D and flat washer E
for each bracket.
b. Fit each of the four (4) locking brackets A with the pointed
section facing inwards.
c. Screw in the assembled bolt only until finger-tight, loose
enough to adjust later.
6. Adjust the appliance feet at a suitable height to allow them to
slide under the foot locking brackets.
7. Lift the appliance onto the pedestal so that the appliance front
feet slide under the foot locking brackets.
Tighten the bolts securing the fast locking brackets, ensuring the
bracket is firmly against each feet of the appliance.
8. Move the Pedestal/Appliance assembly to its permanent location.
Use a spirit level to check if the assembly is properly leveled. If
not leveled, adjust feet to level properly.
9. Connect the appliance as indicated in the instructions supplied
with the appliance.
MONEY BACK GUARANTEE
BUY ACCESSORIES
SUPPORT
PRODUCTS