The display show the following information:
A) : Delay start indicator. When you
set a delay, the indicator illuminates on
the display.
B) Washing indicators: When a
programme is set, all the phases
indicators of a programme illuminate.
When the programme starts, the
indicators flash and remain on
according the programme progress.
• : Pre washing phase
• : Washing phase
• : Rinses phase
• : Draining phase
• : Spinning phase
C) : Door locked indicator. Once the
machine has started, this indicator is
lighted on. When the programme has
finished, this indicator disappears.
• Indicator on: you cannot open the
appliance door.
• Indicator off: you can open the
door.
D) : Clock indicator. After the
programme has started, the
programme duration is displayed and
the clock icon is animated.
E) The time area:
• : Programme duration. After
you set a programme, the duration
is displayed in hours and minutes.
After the programme has started,
the time remaining is updated
every minute.
• : Delay start value
• : Alarm codes. The
integrated red light of Start/Pause
button flashes.
• : Error message. In the event
of operating problems, some alarm
codes can be displayed (see
«Troubleshooting» chapter).
• : The programme is
completed.
F) Soil degree indicators (see paragraph
«Time Manager»).
: Intensive
: Normal / Daily
: Light / Quick
: Super Quick
G) : Child lock indicator (see «Settings»
chapter)
H) Option indicators:
a. : Extra Rinse
b. : Easy Iron
c. : Sensitive (if available).
I) Spin indicators:
•: Spin indicator. During the
spinning phase the spiral is
animated.
• : No spin indicator. This option
eliminates all the spin phases and
increases the number of rinses for
some programmes.
• : Rinse Hold indicator. The
water of the last rinse is not
emptied out to prevent the fabrics
from creasing.
• : Night Cycle indicator. The
machine will not drain the water of
the last rinse, so as not to wrinkle
the laundry. As all spinning phases
are suppressed, this washing cycle
is very noiseless. It can be set at
night or in times with a more
economical power rate. On some
programmes the rinses will be
performed with more water.
J) : Spin speed value.
K) Temperature indicators:
• : Temperature indicator. During
the washing cycle this indicator is
animated to show that the
appliance has started the heating
phase in the tub.
• : Cold water indicator. The
appliance perform a washing cycle
with cold water.
L) : Temperature value
ENGLISH 7