Elegant Furniture And Lighting MRE8001 User manual

IF IN DOUBT ABOUT FITTING THIS PRODUCT, PLEASE CONSULT A QUALIFIED ELECTRICIAN
Page 1
USER GUIDE LED LIGHTED CABINET
USER GUIDE ? LED LIGHTED MIRROR
Elegant Furniture And Lighting Inc.
MRE8001
23.5x30x5.5 inch

C O M P O N E N T PA R T S AND F I T T I N G S
Safety Warning
IMPORTANT
PLEASE READ THE INSTRUCTIONS BEFORE SET UP AND INSTALLATION
Cabinet x1
Suggested Tools:
Drill
Screw driver
Screw & Wall plug x 4
(Included in pack)
Silicon plug x 20
(Included in pack)
Glass shelf bracket x 8
(Included in pack)
Hinge cover x 2
(Included in pack)
Wire nut x 3
(Included in pack)
M01 M04
M02
M03
M05
M07
Glass shelf x 2
(Included in pack)
Caution:
Safety:
• We suggest you spend a short time reading the instruction leaflet.
• Carefully check that you have all the parts before beginning assembly.
• Keep small parts and fittings out of children's reach and keep children well away from construction
area, as the unassembled product contains small parts, which could present a choking hazard.
• We suggest you retain these instructions for future reference.
• This appliance can be used by adults ONLY.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• In order to avoid overheating, do not cover the mirror.
• Switch off the mains supply and remove the appropriate fuse or switch off the appropriate circuit
breaker before commencing installation
• Make sure that there is no danger that the cord or extension cord is inadvertently be pulled or cause
anyone to trip when in use.
Page 2
• Note that this is a hardwired installation and does not come with a power switch. Your electrician
must install the hardwired mirror to an electrical junction box to connect to a room light switch to
turn off or turn on the mirror.
Note that this mirror does not come with a dimmer.

Assembly User Instruction/
STEP3. Contact the wires.
STEP1. Mark the position of the hanging screw. STEP2. Fix the screw.
Page 3
STEP4. Hang up the cabinet on the wall
Please read all instructions carefully.Before you proceed to install,make sure that the power supply is
turned off and remains off until installation is complete.
Please note that each part has been assigned a number and proceed in a numerical order.

Assembly/User Instruction Assembly/User Instruction Assembly User Instruction/
Page 4
silicon plug
glass shelf
bracket
Fixing Glass Shelves
Door Adjustment
M04
M01
M02
Turn the assigned screw clockwise can move
the mirror door towards the cabinet;
Turn the assigned screw counterclockwise
can move the door away the cabinet.
Turn the assigned screw clockwise can move
the mirror door right;
Turn the assigned screw counterclockwise can
move the door left.
Hinge Adjustment
Hinge cover
Choose a suitable location for the glass shelves,
then put the plugs and brackets into the holes
accordingly. Incline the glass shelf to fix inside
the cabinet, press the shelf to make it stably
stuck onto the bracket .

Installation Dimensions:
C
Page 5
Elegant Furniture And Lighting Inc.
500 550 E.Erie Avenue philadelphia, PA 19134 -
Toll Free: 1 888 388 3390 Tel: [phone] - - - - ( ) -
www.elegantlighting.com
A
B
D
E
MODEL A(inch) B(inch) C(inch)
MRE8001 23.5 30 5.5
D(inch) E(inch)
19.7 26