Home Styles 88 5524 943 User manual

Part List
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
For assembly see instructions in carton 88 5524 942
88 5524 943
Kitchen Island
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.

Part List
For assembly see instructions in carton 88 5524 942
88 5524 941
Kitchen Island
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
(Knock-Down Construction, please refer to
the last page (5),(6) of instructions for steps to
complete drawer assembly)
I.
Base
1 pc.
K.
Shelf
2 pcs.
J.
Door
1 pc.
M.
Drawer
2 pcs.
L.
Drawer
2 pcs.
G.
Front Rail
1 pc. H.
Front Rail
1 pc.

Part List
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Tools required for assembly: Phillips screwdriver, Level
For assembly see instructions in carton 88 5524 941, 88 5524 943
Hardware List
M4x28
Machine Screw
9 pcs.
Cam Lock Screw
28 pcs.(+2 extra)
Cam Lock
28 pcs.(+6 extra)
Flat Washer
8 pcs. (+1 extra)
Adjustable Pin
8 pcs. (+1 extra)
M3.5x16
Wood Screw (short)
for Drawer Bottom
16 pcs. (+1 extra)
Knob
1 pc.
Handle
4 pcs.
M3.5x25
Wood Screw (long)
for Drawer Side
40 pcs. (+1 extra)
88 5524 942
Kitchen Island
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
C.
Middle Panel
1 pc.
D.
Side Panel
1 pc.
B.
Side Panel
1 pc.
F.
Back Panel
1 pc.
E.
Back Panel
1 pc.
M3x15
Wood Screw
for Magnet
2 pcs. (+1 extra)
Magnet
1 pc.
M6x35
Long Screw
for Base
8 pcs. (+1 extra)

Assembly Instructions 2/6
Cam Lock Screw
Figure 1
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
B
C
I
A
Cam Lock Screw
STEP 1
Put Cam Lock Screws into
the pre-drilled holes of Top (A),
Side Panels (B), (D), Middle Panel (C),
Back Panel (E) and Base (I) and tighten.
(see Figure 1)
E
D
Cam Lock Screw
Cam Lock Screw

Assembly Instructions 3/6
Figure 2
Cam Lock
STEP 3
Attach Front Rails (H) and (G)
to Middle Panel (C).
Attach unit from Step 2 to unit from
Step 3 with Cam Locks.
STEP 2
Attach Back Panel (E) to
Panel (B) with Cam Locks.Side
(see Figure 2)
Attach Back Panel (F) to unit with
Cam Locks.
STEP 4
Attach Side Panel (D) to unit
with Cam Locks.
C
B
E
F
H
D
G
Cam Lock
Cam Lock

Assembly Instructions 4/6
Flat Washer
Long Screw
STEP 5
Attach Base (I) to unit with Washers, Long Screws
and Cam Locks. (see Figure 3)
Attach Magnet to unit with Wood
Screws for Magnet. (see Figure 4)
STEP 6
Turn the unit upright position, attach Top (A)
to unit with Cam Locks.
Slide Drawers (L) and (M) into position.
Insert Adjustable Pins into side panel and
middle panel at desired level, then place
Shelves (K) into position.
Attach Door (J) by sliding the door lift hinges
into the side panels lift hinges. (see Figure 5)
Assemble Knob to Door (J) with Machine
Screws. (see Figure 6)
To level the unit, adjust the adjustable
levelers on the bottom of unit. (see Figure 7)
Note: Unit must be level to work properly.
Cam Lock
Figure 5
Figure 3 Figure 4
Cam Lock
Figure 7
L
Wood Screw
for Magnet
Magnet
I
L
M
M
K
K
J
A
Figure 6
Adjustable Pin

(Figure 3)
STEP 3
Insert wood screws (4X)short
into the pre-drilled holes in L5,
tighten screws. (See Figure 3)
STEP 4
Attach Handle
with machine screws.
(See Figure 4)
STEP 2
Slide L5 into the grooves in L3
and L4. Be sure to push L5 all
the way forward so it meets L1.
(See Figure 2)
Tighten all screws used in drawer assembly.
(Figure 1)
(Figure 2)
MAKE SURE ROLLER
IS ON THE BACK
L2
L3
L4
L5
L1
Drawer L
Part List
(Figure 4)
STEP1
Attach L1 to L3 and L4, using
a andPhillips screwdriver
wood screws (4X),long
tighten halfway.
Attach L2 to L3 and L4 using
wood screws (4X),long
tighten halfway. (See Figure 1)
L3
L4
L1
L2
L1
L3
L4
L5
L2
L1.
Drawer Front
2 pcs.
L5.
Drawer Bottom
2 pcs.
L2.
Drawer Back
2 pcs.
L3.
Drawer Side
2 pcs.
L4.
Drawer Side
2 pcs.
Assembly Instructions 5/6

Assembly Instructions 6/6
(Figure 3)
STEP 3
Insert wood screws (4X)short
into the pre-drilled holes in M5,
tighten screws. (See Figure 3)
STEP 4
Attach Handle
with machine screws.
(See Figure 4)
STEP 2
Slide M5 into the grooves in M3
and M4. Be sure to push M5 all
the way forward so it meets M1.
(See Figure 2)
Tighten all screws used in drawer assembly.
(Figure 2)
MAKE SURE ROLLER
IS ON THE BACK
M2
M3
M4
M5
M1
Drawer M
Part List
(Figure 4)
STEP1
Attach M1 to M3 and M4, using
a andPhillips screwdriver
wood screws (6X),long
tighten halfway.
Attach M2 to M3 and M4 using
wood screws (6X),long
tighten halfway. (See Figure 1)
M3
M4
M1
M2
M1
M3
M4
M5
M2
M1.
Drawer Front
2 pcs.
M5.
Drawer Bottom
2 pcs.
M2.
Drawer Back
2 pcs.
M3.
Drawer Side
2 pcs.
M4.
Drawer Side
2 pcs.
(Figure 1)

Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
Hardware List
Bar Stool
88 5 8524 9
A.
Seat
1 pc.
B.
Side Stretcher
2 pcs.
F.
Back Frame
.1 pc
D.
Leg
1 pc.
M6x50
Head Cap Bolt
4 pcs.(+1 extra)
Spring Washer
11 pcs.(+1 extra)
Flat Washer
11 pcs.(+1 extra)
Hex Wrench
1 pc.
M6x70
Head Cap Bolt (long)
4 pcs.(+1 extra)
M4x40
Wood Screw
6 pcs.(+1 extra)
M6x40
Head Cap Bolt (short)
3 pcs.(+1 extra)
Small
Hex Wrench
1 pc.
Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tools required for assembly: Phillips screwdriver
E.
Leg
1 pc.
C.
Front Stretcher
1 pc.

Assembly Instructions 2/2
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep the Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
Spring Washer
Head Cap Bolt
Flat Washer
Wood Screw
Figure 1
Figure 5
Figure 2
Figure 3
Figure 4
STEP 1
Attach Leg (D) and (E) to Seat (A) with Flat Washers,
Spring Washers and Head Cap Bolts. Tighten Head
Cap Bolts only half way. (see Figure 1)
Attach Front Stretcher (C) to the unit with Wood
Screws. (see Figure 2)
Attach Side Stretchers (B) to Leg (D) and (E)Side with Wood
Screws. (see Figure 3)
STEP 2
Attach Back Frame (F) to the unit with Flat Washers, Spring Washers,
Head Cap Bolts (short), Head Cap Bolts (long) and Wood Screws.
(See Figure 4), (See Figure 5)
Tighten up all Head Cap Bolts.
Spring Washer
Head Cap Bolt
(short)
Flat Washer
E
C
B
A
D
F
B
Wood Screw
Spring Washer
Head Cap Bolt (long)
Flat Washer