Elektra Beckum Basic 265 User manual

115 166 3628 /1400 - 1.0
Basic 265
Betriebsanleitung. . . . . . . . . . . . . . . . . . . . .3
Operating Instruction . . . . . . . . . . . . . . . . . .7
Instructions d’utilisation . . . . . . . . . . . . . . .11
Handleiding . . . . . . . . . . . . . . . . . . . . . . . .15
Manuale d’istruzioni. . . . . . . . . . . . . . . . . .19
Manual de uso. . . . . . . . . . . . . . . . . . . . . .23
Manual de operação . . . . . . . . . . . . . . . . .27
Betjeningsvejledning . . . . . . . . . . . . . . . . .31
Bruksanvisning . . . . . . . . . . . . . . . . . . . . .35
Bruksanvisning . . . . . . . . . . . . . . . . . . . . .39
Käyttökäsikirja . . . . . . . . . . . . . . . . . . . . . .43
Kezelési utasítás . . . . . . . . . . . . . . . . . . . .47
Instrukcja obsługi. . . . . . . . . . . . . . . . . . . .51
Οδηγεσ Χρσησ . . . . . . . . . . . . . . . . . . .55
K0007IVZ.fm

2
D DEUTSCH ENG ENGLISH
KONFORMITÄTSERKLÄRUNG DECLARATION OF CONFORMITY
Wir erklären in alleiniger Verantwortlichkeit, daß dieses Produkt mit den
folgenden Normen übereinstimmt* gemäß den Bestimmungen der
Richtlinien**
We herewith declare in our sole repsonsibility that this product complies
with the following standards* in accordance with the regulations of the
undermentioned Directives**
F
FRANÇAIS
NL
NEDERLANDS
DECLARATION DE CONFORMITE CONFORMITEITSVERKLARING
Nous déclarons, sous notre seule responsabilité, que ce produit est en
conformité avec les normes ou documents normatifs suivants* en vertu
des dispositions des directives **
Wij verklaren als enige verantwoordelijke, dat dit product in
overeenstemming is met de volgende normen*
conform de bepalingen van de richtlijnen**
IT
ITALIANO
ES
ESPAÑOL
DICHIARAZIONE DI CONFORMITÀ DECLARACION DE CONFORMIDAD
Noi dichiariamo sotto la nostra esclusiva responsabilità che il presente
prodotto è conforme alle seguenti norme* in conformità con le
disposizioni delle normative **
Declaramos bajo nuestra exclusiva responsabilidad, que el presente
producto cumple con las siguientes normas* de acuerdo a lo dispuesto
en las directrices**
PT
PORTUGUÊS
SV
SVENSKA
DECLARAÇÃO DE CONFORMIDADE
FÖRSÄKRAN OM ÖVERENSSTÄMMELSE
Declaramos sob nossa responsabilidade que este produto está de
acordo com as seguintes normas* de acordo com as directrizes dos
regulamentos **
Vi försäkrar på eget ansvar att denna produkt överensstämmer med
följande standarder* enligt bestämmelserna i direktiven**
FIN
SUOMI
NO
NORGE
VAATIMUKSENMUKAISUUSVAKUUTUS SAMSVARSERKLÆRING
Vakuutamme, että tämä tuote vastaa seuraavia normeja* on direktiivien
määräysten mukainen** Vi erklærer under eget ansvar at dette produkt samsvarer med følgende
normer* henhold til bestemmelsene i direktiv**
DA
DANSK
POL
POLSKI
OVERENSSTEMMELSESATTEST 2:,$'&=(1,(2=*2'12 &,
Hermed erklærer vi på eget ansvar, at dette produkt stemmer overens
ed følgende standarder* iht bestemmelserne i direktiverne**
2ZLDGF]DP\]SHáQ RGSRZLHG]LDOQR FL  HQLQLHMV]\SURGXNW
RGSRZLDGDZ\PRJRPQDVW SXM F\FKQRUPZHGáXJXVWDOH Z\W\F]Q\FK

**
EL
+1,.$
HU
MAGYAR
 0(*(*<(= 6e*,1<,/$7.2=$7
         
 
     
.L]iUyODJRVIHOHO VVpJQNWXGDWiEDQH]HQQHOLJD]ROMXNKRJ\H]D
termék kielégíti az alábbi szabványokban lefektetett követelményeket*
PHJIHOHOD]DOiEELLUiQ\HOYHNHO tUiVDLQDN

Basic 265
* EN 60204-1, EN 60335-1, EN 1012-1
** 98/73/EG, 73/23 EWG, 89/336/EWG, 93/68/EWG, 87/404EWG, 84/532/EWG, 84/533/EWG
Jürgen Kusserow
Vorstand
ELEKTRA BECKUM AG – Daimlerstraße 1 – 47916 Meppen
1000888/ 00
U2K0007.fm

7
ENGLISH
1. Machine Overview
1
2
3
5
6
8
9
4
7
10
1Compressor pump
2Pressure vessel
3Condensate drain cock
4Safety valve
5Compressed air outlet
(quick coupler)
6Outlet pressure gauge
7Pressure regulator
8Tank pressure gauge
9On/Off switch
10 Air intake filter housing
XK0007E.fm Betriebsanleitung DEUTSCH

8
ENGLISH
1. Machine Overview........................7
2. Please Read First!........................8
3. Safety.............................................8
3.1 Specified conditions of use.............8
3.2 General safety information.............8
3.3 Safety devices................................8
4. Operation ......................................8
4.1 Prior to initial operation...................8
4.2 Mains connection ...........................9
4.3 Generating compressed air............9
5. Care and Maintenance.................9
5.1 Periodic maintenance.....................9
5.2 Machine storage.............................9
6. Trouble Shooting..........................9
7. Repairs........................................10
8. Environmental Protection..........10
9. Technical Specifications ...........10
•Read these instructions before use.
Pay special attention to the safety
information.
•If you notice transport damage while
unpacking, notify your supplier
immediately. Do not operate the
machine!
•Dispose of the packing in an envi-
ronmentally friendly manner. Take
to a proper collecting point.
•Keep these instructions for refer-
ence on any issues you may be
uncertain about.
•If you lend or sell this machine be
sure to have the instructions to go
with it.
3.1 Specified conditions of
use
This machine is intended to generate
compressed air required for the opera-
tion of air tools.
Any use for medical purposes, food
processing as well as filling of oxygen
cylinders for breathing equipment is not
permitted.
Explosive, combustible gases or gases
detrimental to health may not be com-
pressed. Operation in hazardous loca-
tions is not permitted.
Any other use is not as specified. Use
not as specified, alteration of the
machine or use of parts that are not
approved by the equipment manufac-
turer, can cause unforeseeable damage!
Children, juveniles and persons not hav-
ing been instructed in its usage are not
permitted to operate this machine and
any air tools connected to it.
3.2 General safety informa-
tion
Danger!
Air tools can, due to operator
carelessness, cause serious personal
injury, hence it is strongly recommended
you read and observe:
•these instructions, particularly the
special safety information in the
respective chapters;
•the safety information in the
enclosed red booklet;
•all statuary accident insurance insti-
tution regulations and regulations for
the prevention of accidents pertain-
ing to the operation of air compres-
sors and air tools, were applicable.
Keep all documents, supplied with the
machine, for future reference.
The following residual risks do principally
exist with air tools and can not, even by
employing safety devices, completely
eliminated:
−Risk of personal injury by escap-
ing compressed air and parts
hurled about by escaping air.
Wear safety glasses!
Never direct compressed air against
persons or animals!
Ensure all air tools and accessories
used are designed for the working
pressure or are supplied via a pres-
sure regulator.
Please note that, when disconnect-
ing the quick coupler, the com-
pressed air contained in the pres-
sure hose will escape all of a
sudden. You should therefore firmly
hold the air hose when disconnect-
ing it.
Ensure all screwed connections are
fully tightened at all times.
Do not attempt to repair the machine
yourself! Only trained specialists are
permitted to service or repair com-
pressors, pressure vessels and air
tools.
−Hazard generated by compressed
air containing oil
Use compressed air containing oil
only for air tools that require such
supply. Do not use an air hose used
to supply compressed air contain-
ing oil to supply air tools not
designed for operation on com-
pressed air containing oil. Do not fill
tires with compressed air containing
oil.
−Hazard of burns generated by the
the hot surfaces of pressurized
parts
let device cool down before servic-
ing.
−Crushing hazard and risk of per-
sonal injury by moving parts
Do not operate the machine without
installed guards.
Please note that the compressor will
start automatically when the pres-
sure falls off to minimum! – discon-
nect from power supply prior to any
servicing.
−Hazard of damage to hearing gen-
erated by noise
Wear hearing protection when work-
ing with a compressor.
3.3 Safety devices
Safety valve
The spring safety valve (11) is incorpo-
rated into the pressure switch unit. The
safety valve opens if the max. permissi-
ble pressure is exceeded.
4.1 Prior to initial operation
Installing wheels and feet
1. Install wheels as illustrated.
2. Place starlocks on the wheels so
that the starlock's (12) clips are posi-
tioned exactly opposite the receiving
grooves of the wheels (13). Then
push the starlocks onto the wheels.
3. Install rubber feet as illustrated.
Table of Contents
2. Please Read First!
3. Safety
4. Operation
11
12
13

9
ENGLISH
4.2 Mains connection
Danger! High voltage
Operate machine in dry envi-
ronment only.
Operate machine only on a power
source complying with the following
requirements:
−outlets properly installed, earthed
and tested;
−Fuse protection in accordance
with the Technical Specifications;
Position power cable so it does not
interfere with the work and is not
damaged.
Always check to see that the machine
is switched OFF before plugging in.
Protect power cable from heat,
aggressive liquids and sharp edges.
Use only extension cables with suffi-
cient lead cross section (see "Techni-
cal Specifications").
Do not stop the compressor by
unplugging, but switch OFF using the
switch.
Unplug after use.
4.3 Generating compressed
air
1. Start compressor (14) and wait until
the max. tank pressure is reached
(compressor shuts off).
The tank pressure is indicated by
the tank pressure gauge (15).
2. Set pressure regulator (16) to
required working pressure. The cur-
rent working pressure is indicated
by the regulated pressure gauge
(17).
Caution!
The regulated pressure may
not be set higher than the max. wor-
king pressure of the connected air
tools!
3. Connect air hose to compressed air
outlet (18).
4. Connect air tool.
You are now ready to work with the
air tool.
5. Switch the compressor OFF, if you
do not continue working immediately
afterwards. Unplug after switching
OFF.
Danger!
Prior to all servicing:
−Switch Off.
−Unplug.
−Wait until the compressor has
come to a complete stop.
−Ensure the compressor and all air
tools and accessories connected
to it are relieved from pressure.
After all servicing:
−Check to see that all safety
devices are operational.
−Make sure that no tools or other
parts remain on or in the
machine.
Repair and maintenance work other
than described in this section must
only be carried out by qualified speci-
alists.
5.1 Periodic maintenance
Prior to each use
•Check air hoses for damage,
replace if necessary.
•Check all screwed connections for
tightness, tighten if necessary.
•Check power supply cable for dam-
age, if necessary have replaced by
a qualified electrician.
Every 50 operating hours
•Check air intake filter (19), clean if
necessary.
•Drain condensate (20).
Every 250 operating hours
•Replace air filter element.
5.2 Machine storage
1. Switch unit OFF and unplug.
2. Release pressure from tank and all
connected air tools.
3. Store machine in such way that it
cannot be started by unauthorized
persons.
Caution!
Do not store machine unpro-
tected outdoors or in damp environ-
ment.
Danger!
Prior to all servicing:
−Switch Off.
−Unplug.
−Wait until the compressor has
come to a complete stop.
−Ensure the compressor and all air
tools and accessories connected
to it are relieved from pressure.
After all servicing:
−Check to see that all safety
devices are operational.
−Make sure that no tools or other
parts remain on or in the
machine.
Compressor does not run:
•No mains voltage.
−Check cables, plug, outlet and
mains fuse.
•Mains voltage too low.
−Use only extension cables with
sufficient lead cross section (see
"Technical Specifications"). Avoid
using extension cable with cold
machine.
•Compressor was stopped by
unplugging.
−Switch compressor OFF at the
On/Off switch, then ON again.
•Motor has overheated, caused by
insufficient cooling (cooling fins cov-
ered).
−Remove cause for overheating
and allow to cool down for
approx. 10 minutes, then start
again.
Compressor runs but does not build
up sufficient pressure.
•Check valve leaky.
−Have check valve serviced by
qualified service centre.
Air tool is not supplied with sufficient
pressure.
•Pressure regulator not opened wide
enough.
−Open pressure regulator more.
16
17
14
15
18
5. Care and Maintenance
19
20
6. Trouble Shooting

10
ENGLISH
•Hose connection between compres-
sor and air tool leaky.
−Check air hoses, replace defec-
tive parts if necessary. Danger! Repairs to power tools must be
carried out by qualified electricians
only!
Power tools in need of repair can be sent
to one of the adresses listed on the sec-
ond-last page.
Please attach a description of the fault to
the power tool.
The machine’s packaging can be 100 %
recycled.
Worn out machines and accessories
contain considerable amounts of valua-
ble raw and plastic materials, which can
be recycled.
These instructions are printed on chlo-
rine-free bleached paper.
7. Repairs 8. EnvironmentalProtection
9. Technical Specifications
Suction capacity l/min 235
Free air delivery (volume flow rate) l/min 125
Filling rate l/min 145
Working pressure (compression end pressure) bar 8
Pressure vessel volume l 50
No. of air outlets 2
Pump model F245
No. of cylinders 1
Motor speed min-1 2850
Motor capacity W1.5
Supply voltage (50 Hz) V 230
Rated current A6.8
Fuse protection min. A 10 (time-lag)
Degree of protection IP 20
Max. overall cable length when using extension cables:
– at 3 x 1.0 mm2lead cross section
– at 3 x 1.5 mm2lead cross section
– at 3 x 2.5 mm2lead cross section
m
m
m
10
25
25
Dimensions length x width x height mm 905 x 410 x 690
Weight kg 25
Sound pressure level at 1 m max. dB (A) 88 ± 3