Element Enduro TrailRunner Manual

TRAILRUNNER
SPORT UTILITY VEHICLE
OWNERS BUILD MANUAL
#40104

AE is a Registered Trademark of Associated Electrics, Inc.
TEAM ASSOCIATED is a Registered Trademark of Associated Electrics, Inc.
REEDY is a RegisteredTrademark of Associated Electrics, Inc.
FACTORY TEAM is a Registered Trademark of Associated Electrics, Inc.
ELEMENT ™is a Trademark of Associated Electrics, Inc.
AREA 51 is a Registered Trademark of Associated Electrics, Inc.
STEALTH is a Registered Trademark of Associated Electrics, Inc.
GREEN SLIME is a Registered Trademark of Associated Electrics, Inc.
02 33.656906, -117.700602
FEATURES
• Stealth X Gearbox with adjustable
overdrive gears
• CMS [Chassis Mounted Servo]
• Independent front suspension
• Aluminum swing rack
• Threaded aluminum shock bodies
• Durable injection-molded upper and
lower suspension arms
• Universal front drive axles
• Stamped steel frame rails
• Enclosed receiver box
• 12mm wheel hexes
• Adjustable front and rear bumper
mounts
• Adjustable width rock sliders
• Two battery boxes
• Aluminum Motor Plate
• Adjustable body posts
• Optimized ball cups for more fl uid axle
articulation
• Adjustable rear shock mount positions
• Telescopic driveshaft’s front and rear
• Extruded aluminum driveshaft splines
• One-piece rear axle design
• Machined input pinion gear
• Metal ring gear
• Machined steel top shaft
• Metal idler gears
• Heavy duty 5mm diameter steel links
• Metal ball bearings included
• Licensed 1.55”x3.85” General Grabber
A/T X tires
ELECTRONICS:
• Water resistant 2S-3S LiPo compatible
Reedy SC400X brushed electronic
speed control with adjustable drag
brake andT-plug battery connector
• Smooth and powerful Reedy Crawler
16T 5-slot brushed motor
• XP130 2.4GHz radio system
(3 Channel)
• Reedy high-torque 1320MG metal gear
servo (13kg/180 oz.)
TRAILRUNNER BODY FEATURES:
• TrailRunner body thermoformed in high-
strength polycarbonate
• Two-piece body with accesories
• Clear windows with tinted decals
• Molded grill, fender fl ares, and door
handles
• Molded side mirrors
• Three-piece injection molded front
bumper with D-rings.
• Removable fairlead
INTRODUCTION
Thank you for purchasing this Element RC product. This assembly manual contains instructions and tips for building and maintaining
your new Enduro chassis. Please take a moment to read through this manual to help familiarize yourself with these steps. We are
continually changing and improving our designs; therefore, actual parts may appear slightly different than in the illustrations. New parts
will be noted on supplementary sheets located in the appropriate parts bags.
ENDURO TRAIL TRUCK
A performance rig built to endure. When hitting the trail, you want to do it with confi dence and the answer is the all new
Enduro Trail Truck!
At the heart of the Enduro is our revolutionary Stealth® X gearbox. Although the exterior appears to have a conventional
3-gear transmission look, the inside is far from conventional.The Stealth® X features the ability to adjust the rear drive ratio
independently from the front drive in 3 levels. Stock overdrives the front end 5.7%, option 1 provides a one-to-one drive ratio front
to rear and option 2 overdrives the front end 11.83%.
Feeding the power to the tires are three-piece telescopic driveshafts with an extruded aluminum center section, universal front
drive axles, and hardened steel ring and pinion gears. With the Enduro drivetrain, delivering useful power will not be an issue.
With durability, performance, agility and scale looks in mind, the engineers at Area 51 Design Works came up with the Independent
Front Suspension conversion kit. Now you can get that same kit in an RTR vehicle. Pre-assembled with the same quality and
features, this trail truck comes equipped with IFS and is scale ready to tackle rough off road terrain right out of the box.
The Enduro Trail Truck comes ready for adventure, with performance-driven Reedy Power electronics.The all-new, ultra-smooth
and powerful, 16-turn 5-slot brushed crawler motor and Reedy Power SC400X electronic speed controller with T-plug connector,
supply ample power to this tough rig. Controlling the beast on the trail is our new 3-channel XP130 2.4GHz radio and Reedy
Power high-torque 1320MG metal gear servo.
With all this packed in one box, we know the Enduro Trail Truck is ready for the trail – Are you?
Associated Electrics, Inc.
21062 Bake Parkway.
Lake Forest, CA 92630
Customer Service
Tel: [phone]
Fax: [phone]
Follow Us On Social Media
www.ElementRC.com
ElementRC @Element_RC
ITEMS NEEDED
OTHER HELPFUL ITEMS
The following items aren’t required, but will
aid in the building and maintaining of your
Enduro Trail Truck.
• Threadlock (#1596)
• Green Slime (#1105)
The following items are required to build
or maintain your Enduro Trail Truck.
• 1.5mm Allen Wrench (#1500)
• 2mm Allen Wrench (#1501)
• 2.5mm Allen Wrench (#1503)
• Pliers
• Long Nose Pliers
• 5.5mm Nut Driver (#1507)
• 7mm Nut Driver (#1508)

4x8x3mm (91568)
5x10x4mm (91560)
7x14x3.5mm (91474)
10x15x4mm (91563)
2.5x10mm (31350)
2.5x14mm (41077)
3x6mm (31541)
Titanium (91591)
3x8mm (25201)
Titanium (91592)
3x10mm (25202)
Titanium (91593)
3x12mm (25203)
Titanium (91594)
3x14mm (89208)
Titanium (91595)
2x3mm (31509)
2.6x10mm, Self Tapping (41088)
3x4mm (91158)
3x5mm (31530)
3x6mm (31531)
Titanium (91580)
3x8mm (31532)
Titanium (91581)
3x10mm (25211)
Titanium (91582)
3x12mm (89202)
Titanium (91583)
3x14mm (25187)
Titanium (91584)
3x16mm (89203)
Titanium (91585)
3x18mm (2308)
3x20mm (25188)
Titanium (91587)
3x26mm (89205)
3x28mm (41078)
Pivot Ball, Short (42041)
Pivot Ball, Long, Upper Shock (42041)
3x3mm (25225)
3x16mm (4689)
4x16mm (4677)
M3 Locknuts (25215)
Aluminum (31550)
M4 Locknut W/Flange (25391)
03 33.656906, -117.700602
HARDWARE USED WITH OPTIONAL REPLACEMENT PART NUMBERS
HARDWARE 1:1 SCALE VIEW
FLAT HEAD SCREWS (FHCS) SOCKET HEAD SCREWS (SHCS) SHIMS AND WASHERS
SET SCREWS
PIVOT BALLS
LOCK NUTS
BEARINGS
BUTTON HEAD SCREWS (BHCS)
2x5mm (31511)
Aluminum (8566)
2x8mm (7187)
2.5x6mm (41079)
2.5x10mm (41087)
2.5x14mm (71032)
2.5x16mm (41086)
3x6mm (41089)
.250x.125x.015 (7337)
Servo Horn Spacer (42041)
Drive Gear Shim (42027)
MISC. SCREWS
LINKS
Shoulder Screw 3x4x10mm (42070)
Screw Pin (42022)
Pin 2x11mm (42019)
73mm
32mm
83mm
93mm
96mm
100mm
108mm
114mm

04 33.656906, -117.700602
TABLE OF CONTENTS
USING THIS MANUAL
There is a 1:1 hardware foldout page in the front of the manual. To
check the size of a part, line up your hardware with the correct
drawing until you fi nd the exact size. Each part in the foldout has a
number assigned to it for ordering replacement parts.
This symbol indicates a special note or
instruction in the manual.
This symbol indicates the order within
a step to assemble parts.
This symbol indicates
where Black Grease
should be applied.
This symbol indicates
where Shock Fluid
should be applied.
This symbol indicates the number of
the same part that is required.
This symbol indicates a Trail Tip.
2
x2
BLACK GREASE
#6588
GREEN SLIME
#1105
THREAD LOCK
#1596
SHOCK FLUID
#5422
01
COVER
02
INTRODUCTION
03
1:1 HARDWARE “FOLD OUT”
04
TABLE OF CONTENTS
05
STEERING BUILD
06
FRONT GEARBOX BUILD
07
FRONT SUSPENSION BUILD
08
GEARBOX BUILD
09
CHASSIS BUILD
11
REAR AXLE BUILD
12
LINKS BUILD
12
REAR DRIVESHAFT BUILD
13
SHOCKS BUILD
14
WHEELS/TIRES BUILD
15
BODY BUILD
18
DECALS
19
CATALOG
28
OPTIONAL GEARBOX BUILD
29
TRAIL TIPS
30
BACK COVER
3/16/2020
This symbol indicates
where Thread Lock
Adhesive should be
applied. *not included
This symbol indicates
where Green Slime can
be applied. *not included

YOUR BUILD BEGINS HERE.
STEERING BUILD
GATE 01
STEERING BUILD
GATE 02
STEERING BUILD
GATE 03
05
x2
x1 x1
x1
x1
42040
Rod Ends,
curved
42040
Rod Ends,
straight
42214
IFS Link,
32mm
42214
IFS Link,
32mm
42040
Rod Ends,
curved
x1
42214
IFS Link,
32mm
Servo Link
Steering Link
Build Left and Right Steering Links
60.65mm
61.50mm
x2
x2
25215
Locknut,
M3
42216
M5.8x8mm,
Ballstud, SILVER
x4
x2
x1
x2
x2
x2
x1
x1
x2
x1
x2
x2 x5
x1
x4
x1
x1
x1
42217
Steering Post,
IFS
42201
Bellcrank,
IFS
31531
M3x6mm,
BHCS
25187
M3x14mm,
BHCS
25211
M3x10mm,
BHCS
42215
Servo Horn
7337
Washer
SERVO
Not
Included
89203
M3x16mm,
BHCS
42217
Steering Rack,
IFS
91568
4x8x3mm
Bearing
42041
Pivot Ball,
Short
42201
Bellcrank,
IFS
7337
Washer
42217
Hat Bushing,
IFS
31541
M3x6mm
FHCS
89202
M3x12mm,
BHCS
42203
Servo Mount,
IFS
THREAD LOCK
#1596
NOT INCLUDED
THREAD LOCK
#1596
NOT INCLUDED
THREAD LOCK
#1596
NOT INCLUDED
THREAD LOCK
#1596
NOT INCLUDED
NOTE:
Install #89202
into servo horn
NOTE: Hole marked is
for IFS Conversion use.
Outer hole is for solid
axle use.
Servo Horn
BLACK GREASE
#6588
BLACK GREASE
#6588

FRONT GEARBOX BUILD
GATE 01
FRONT GEARBOX BUILD
GATE 02
FRONT GEARBOX BUILD
GATE 03
06
Install Left and Right Mounts
x1
x1
x1
x6
x2
x1
x1
x2
x2
x2
x2 x4
x1
x1
25211
M3x10mm,
BHCS
25203
M3x12mm,
FHCS
42065
Ring Gear,
30T
42066
Pinion Gear,
8T
42200
IFS Gearbox,
Top
42200
IFS Gearbox,
Bottom
42203
IFS Gearbox,
Mount
25211
M3x10mm,
BHCS
89208
M3x14mm,
FHCS
42203
Upper Arm
Mount, IFS
42203
Gearbox Mount,
IFS
25202
M3x10mm,
FHCS
91560
5x10x4mm
Bearing
91474
7x14x3.5mm
Bearing
BLACK GREASE
#6588
THREAD LOCK
#1596
NOT INCLUDED
x2 x1 x2
x1
x1
x1
x2
x2
x2
42021
Drive Shaft,
Male, CVA
42019
Pin,
2x11mm
42020
Drive Shaft, Female
(33mm, 42mm)
31532
3x8mm
BHCS
42020
Drive Shaft, Male
(48mm, 60mm)
42020
Pin Retainer,
Short
42020
Pin Retainer,
Long
42021
Drive Shaft,
Female, CVA
42021
Drive Shaft
Barrel
Front (mm)
33
33
48
Female 1
Female 2
Male
Drive Shaft Lengths
42020
Gearbox Side
Gearbox
Side
Axle
Side
42020
Axle Side
NOTE: Build a
front drive shaft
THREAD LOCK
#1596
NOT INCLUDED
THREAD LOCK
#1596
NOT INCLUDED

FRONT SUSPENSION BUILD
GATE 01
FRONT SUSPENSION BUILD
GATE 02
FRONT SUSPENSION BUILD
GATE 03
07
33.656906, -117.700602
Build Left and Right Upper Arms Install Left and Right Upper Arms
x1 42229
M3x20mm,
hinge pin
x1x1
x1
x1
42040
Rod Ends,
curved
4677
M4x16mm,
Set Screw
42202
Upper Arm,
front
31509
M2x3mm ,
BHCS
Upper Arm
NOTE: Thread set
screw into ballcup until
4mm thread is showing.
NOTE: Thread the
exposed set screw into
the arm until snug!
Build Left and Right Lower Arms Install Left and Right Lower Arms
x1
x1
x2
x1
x1
42040
Rod Ends,
curved
42228
Bulkhead,
IFS
42229
M3x32mm,
hinge pin
4677
M4x16mm,
Set Screw
42202
Lower Arm,
front
Lower Arm
x2
x1
x2
x1
89203
M3x16mm,
BHCS
42204
Skid Plate,
Front
89202
M3x12mm,
BHCS
42204
Skid Plate,
Rear
NOTE: Thread set
screw into ballcup until
4mm thread is showing.
NOTE: Thread the
exposed set screw into
the arm until snug!
BLACK GREASE
#6588
BLACK GREASE
#6588

FRONT SUSPENSION BUILD
GATE 04
GEARBOX BUILD
GATE 01
GEARBOX BUILD
GATE 02
08
x4
x1
x1
x2
x4
x2
x1
x1
x1
x1
x1
x1
NOTE: There are optional
gearbox builds on page 28
NOTE: Make sure the
10x15x4mm bearing is completely
seated in the short outdrive
x1
x1
x4
x5
x2
x1
42026
Stealth X Gearbox
Idler Gear, 27T
42030
Stealth X Gearbox
Top Shaft, Rear
91560
5x10x4mm
Bearing
41078
3x28mm
BHCS
42025
Idler Shaft Pin
2x9mm
42025
Stealth X Gearbox
Idler Shaft
31350
2.5x10mm
FHCS
42023
Stealth X Gearbox
Case
42023
Stealth X Gearbox
Case
91563
10x15x4mm
Bearing
41077
2.5x14mm
FHCS
91563
10x15x4mm
Bearing
42027
Stealth X Gearbox
Outdrive, Long
42027
Stealth X Gearbox
Outdrive, Short
42027
Stealth X Gearbox
Drive Gear Shim
42028
Stealth X Gearbox
Drive Gear, 52T
42026
Stealth X Gearbox
Idler Gear, 28T
42028
Stealth X Gearbox
Drive Gear, 53T
2.5x14mm
FHCS
Stealth X Gearbox
Stealth X Gearbox
20T 28T
27T
52T
53T
Over Drive Option 1 (Stock)
BLACK GREASE
#6588
BLACK GREASE
#6588
Build Left and Right Steering Blocks
Install Left and Right Steering Blocks
x1
x1
x1
x2
x3
x2
x1
x1
x1 x1
x1
25211
M3x10mm,
BHCS
42218
Steering Plate,
IFS
91560
5x10x4mm,
Bearing
42062
Steering
Block
42227
Universal,
55mm 42019
Wheel Hex
Pin, 2x11mm
91563
10x15x4mm
Bearing
42069
Wheel Hex,
6mm
42216
M5.8x8mm,
Ballstud, Silver
42216
M5.8x8mm,
Shoulder Ballstud
25215
M3 Locknut,
Black
x2
42226
Outdrive,
IFS

GEARBOX BUILD
GATE 03
GEARBOX BUILD
GATE 04
CHASSIS BUILD
GATE 01
09
33.656906, -117.700602
x3
x1
x2
x1
x2
x2
x1
42029
Stealth X Gearbox
Motor Plate
42023
Stealth X Gearbox
Spur Gear Hub
31532
3x8mm
BHCS
25391
FT M4 Locknut
25201
3x8mm
FHCS 9654
Spur Gear
48P, 87T
7337
.250x.125x.015”
Washer
x1
Motor
x1
NOTE: Make sure the gear mesh
between the spur gear and pinion
has a slight amount of movement
between the two gears.
x1
x2
x1
42023
Stealth X Gearbox
Gear Cover
31530
3x5mm
BHCS
1336
Pinion Gear
18T
25225
3x3mm
Set Screw
x2
x2
25201
3x8mm
FHCS
89208
3x14mm
FHCS
x1 42004
Gearbox
Mount
x2
x1
x1
x1
x1
x2
x2
x2
x1
x1
x1
31532
3x8mm
BHCS
25211
3x10mm
BHCS
25211
3x10mm
BHCS
31531
3x6mm
BHCS
31532
3x8mm
BHCS
42001
Bumper Mount
Rear
25211
3x10mm
BHCS
42002
Battery
Mount
42001
Bumper Mount
Front
42006
Floor Board
42000
Chassis Rail
Left

CHASSIS BUILD
GATE 02
CHASSIS BUILD
GATE 03
CHASSIS BUILD
GATE 04
10
x2
71050
Hook and
Loop Straps
x1
ESC
x1
6727
Servo Tape
x1
x1
42245
Trailrunner
Rock Slider
42006
Floor Board
x2
x2
x2 89202
3x12mm
BHCS
31532
3x8mm
BHCS
25211
3x10mm
BHCS
NOTE: Install Left and
Right side Rock Sliders
NOTE: There is an optional
“standard pack” sized battery
tray included!
x4
x1
25203
3x12mm
FHCS
42003
Battery Box,
Shorty Pack
x2
x2
25188
M3x20mm,
BHCS
42000
Chassis Rail
Left
x2
4689
3x16mm,
Set Screw
x1 42020
Drive Shaft, Male
(48mm)
x1 42002
Chassis Brace
Rear
x2
x1
x1
x2
25211
3x10mm,
BHCS
31531
3x6mm,
BHCS
31532
3x8mm,
BHCS
25211
3x10mm,
BHCS
x4
x1
x1
x1
x1
x1
42007
Receiver Grommet
Plug
42007
Receiver
Grommet
25202
3x10mm
FHCS
42006
Receiver Box
Bottom
6727
Servo Tape
Receiver

CHASSIS BUILD
GATE 05
REAR AXLE BUILD
GATE 01
REAR AXLE BUILD
GATE 02
11
33.656906, -117.700602
x1 42019
Pin,
2x11mm
NOTE: Install left and
right side drive shafts NOTE: Install left and right side
axle mounts and wheel hexes
x1
x1
91560
5x10x4mm
Bearing
42068
Drive Shaft,
Rear
x1
x1
42069
Wheel Hex,
6mm
42060
Lower 4-Link
Mount
x2
71032
2.5x14mm
SHCS
x4 x2
41086
2.5x16mm,
SHCS
91560
5x10x4mm
Bearing
x1
x1
x1
x2
x2
x1
91474
7x14x3.5mm
Bearing
41089
3x6mm
LP SHCS
42065
Ring Gear,
30T
42066
Pinion Gear,
8T
42061
Axle Housing,
Rear
42060
Axle Housing,
Differential Cover
BLACK GREASE
#6588
RF
RR
RF
RR
x8 89208
3x14mm
FHCS
x1
x1
x4
x1
x1
25202
3x10mm
FHCS
42006
Receiver Box
Lid
6338
Antenna Tube
and Cap
25225
3x3mm
Set Screw
42007
Receiver Box
Grommet
Install Left and Right Front Shock Mounts
x1
x1
42005
Shock Mount
(Left, Rear)
42005
Shock Mount
(Right, Rear)
x1
x1
42225
Shock Mount
IFS
25211
M3x10mm
BHCS
LF
LR

YOUR BUILD BEGINS HERE.
LINKS BUILD
GATE 01
LINKS BUILD
GATE 02
REAR DRIVESHAFT BUILD
GATE 01
12
x2
x2
42041
Pivot Ball,
Short
42041
Pivot Ball,
Short
x2
x2
x1
x1
42040
Rod End,
Curved
42040
Rod End,
Curved
42044
Link,
114mm
42044
Link,
108mm
143.00mm
137.00mm
NOTE: Build and install
two rear upper links
NOTE: Build and install
two rear lower links
NOTE: Check the rod end
angles before installation
NOTE: Check the rod end
angles before installation
BLACK GREASE
#6588
BLACK GREASE
#6588
BLACK GREASE
#6588
BLACK GREASE
#6588
x1 25188
3x20mm,
BHCS
x1
4689
3x16mm,
Set Screw
x2
x1
25215
M3 Locknut,
Black
41078
3x28mm
BHCS
x2 x1 x2
x2
x2
x2
42021
Drive Shaft,
Male, CVA
42019
Pin,
2x11mm
42020
Drive Shaft, Female
(33mm, 42mm)
31532
3x8mm
BHCS
42021
Drive Shaft,
Female, CVA
42021
Drive Shaft
Barrel
Rear (mm)
33
42
60
Female 1
Female 2
Male
Drive Shaft Lengths
42020
Gearbox Side
Gearbox
Side
Axle
Side
42020
Axle Side
NOTE: Build a
rear drive shaft
NOTE: Install the
rear drive shaft
x1
x1
x1
42020
Drive Shaft, Male
(60mm)
42020
Pin Retainer,
Short
42020
Pin Retainer,
Long
THREAD LOCK
#1596
NOT INCLUDED
THREAD LOCK
#1596
NOT INCLUDED

REAR DRIVESHAFT BUILD
GATE 01
SHOCK BUILD
GATE 01
SHOCK BUILD
GATE 02
13
33.656906, -117.700602
x4
42022
Screw Pin
THREAD LOCK
#1596
NOT INCLUDED
THREAD LOCK
#1596
33
42
48
60
33
33
NOTE: Make sure the screw
pins are aligned with each
female CVA during assembly
NOTE: Make sure the phasing of the drive shafts is correct when installing
them to the axles and gearbox.
FRONT REAR
Correct Phasing
Incorrect Phasing
x2
x1
x1
x1
x1
x2
x1
x1
x1
x1
6299
E-Clip
42081
Shock
Piston
42040
Enduro
Rod Ends
42083
Shock Shaft,
3x30mm
42082
Shock Body,
10x32mm
5407
O-Ring,
Red
42081
Shock O-Ring
Spacer
42080
Shock Bottom
Cap
42080
Shock Cap,
Enduro
Shock Bleeding Steps:
1. Pull shock shaft down.
2. Fill shock body 3/4 full with silicone fluid.
3. Slowly move the shock shaft up and down to remove air from
under piston.
4. Wait for bubbles to come to surface.
5. Fill shock body to top with silicone fluid.
6. Place a drop of oil in the cap and on cap threads.
7. Install cap and tighten completely.
8. Slowly compress shaft all the way to the top. If there is
pressure at the top of the stroke, there is too much oil or air.
You must bleed it out.
9. Slowly pull shaft out.
10. Unscrew the cap 3/4 turn and tilt the shock at a slight angle.
11. Slowly compress the shaft to push out excess oil and air.
You should see bubbles coming out from under the cap.
12. With the shaft compressed, tighten the cap and re-check for
pressure at the top of the stroke. If there is still pressure,
repeat steps 9 thru11.
42081
O-Ring, Small,
Shock Cap
SHOCK FLUID
#5422
SHOCK FLUID
#5422
SHOCK FLUID
#5422
SHOCK FLUID
#5422
Step 8-12Step 1-3 Step 3-4 Step 5-6 Step 7
NOTE: Build 4
complete shocks
NOTE: Build 4
complete shocks
THREAD LOCK
#1596
NOT INCLUDED
THREAD LOCK
#1596
NOT INCLUDED

SHOCK BUILD
GATE 03
SHOCK BUILD
GATE 04
WHEELS / TIRES BUILD
GATE 01
14
x1
x1
x1
x1
x1
42081
O-Ring, Large
Shock Collar
42080
Shock Collar,
Black
42080
Shock Spring
Cup
3.5mm
42089
Shock Spring, Rear,
Gray, 1.49 lb/in, 63mm
42230
Shock Spring, Front,
Black, 4.75 lb/in, 63mm
NOTE: Build 4
complete shocks
SHOCK FLUID
#5422
NOTE: Seat O-Ring into
the groove on the inside
of the shock collar
x1
42201
Shock Bumpstop,
IFS
NOTE: Optional Bump
Stop Limiter for the
front shocks.
x2 x1
89203
M3x16mm,
BHCS
89205
M3x26mm,
BHCS
x1
42201
Shock Bumpstop,
IFS
Install Left and Right Rear ShocksInstall Left and Right Front Shocks
x1
x1
x1
x1
x1
x1
x1
42041
Pivot Ball,
Short
42041
Pivot Ball, Long,
Upper Shock
7337
.250x.125x.015in,
Washer
42041
Pivot Ball,
Short
42041
Pivot Ball, Long,
Upper Shock 7337
.250 x .125 x .015 in.
Washer
89203
3x16mm
BHCS
x6
x1
x1
x1
x1
x1
x1
41088
2.6x10mm
BHCS
Self Tapping
42111
Trigon Wheel Hex
Adapter, Black
42111
Trigon Outer Wheel,
1.55”, Black
42107
Tire, General Grabber A/TX
1.55 x 3.85” dia. 42107
Tire, Insert
42111
Trigon Wheel Ring,
1.55”, Black
42111
Trigon Inner Wheel,
1.55”, Black
NOTE: Build 4 wheels/tires
NOTE: Install #41088 screws in
a crossing pattern
2
3
45
6
1

WHEELS / TIRES BUILD
GATE 02
BODY BUILD
GATE 01
BODY BUILD
GATE 02
15
33.656906, -117.700602
Front Post Rear Post
NOTE: Install 2
front body mounts,
1 tall rear body mount
NOTE: Install 4 wheels/tires
x2
x2
42111
Trigon Wheel
Nut Cap, Black
25391
FT M4 Locknut,
Blue
x2
x1
x4
42009
Body Mount,
Short Pin
42009
Body Mount,
Long Pin
42022
Screw Pin
x1
x1
x4
x2
42243
Trailrunner
Rack, Right
42243
Trailrunner
Rack, Left
42243
Trailrunner Rack,
Center Bar
42243
Pin,
2x20mm
x1 42247
Trailrunner Exhaust,
Magnaflow
x2
2308
3x18mm,
BHCS
x1 25211
3x10mm
BHCS

YOUR BUILD BEGINS HERE.
BODY BUILD
GATE 03
BODY BUILD
GATE 04
16
x4
6332
Body Clip
x1
42243
Trailrunner,
Grill
x1 x1
x1
x1
x3
x6
x6
42241
Trailrunner
Body, Clear
42240
Trailrunner
Body, RTR
42243
Trailrunner
Wiper, Rear
42243
Trailrunner,
Wing
42243
Trailrunner
Grommet
21422
Body Clips,
SC28
5407
O-Rings,
Red
x10
x22
42243
Trailrunner
Grommet
42243
Trailrunner
Grommet
x2
x2 x4
x4
x2
x1
x1
x1
42243
Trailrunner,
Mirror
42243
Trailrunner,
Mirror Mount
42243
Trailrunner,
Door Handle
42243
Trailrunner,
Door Handle
Mount
42243
Trailrunner,
B-Pillar
42243
Trailrunner,
Valence
42243
Trailrunner,
Snorkel Mounts
42243
Trailrunner,
Snorkel
x4
x2
42243
Trailrunner,
Flare
42243
Trailrunner,
Wiper, Front

BODY BUILD - OPTIONAL BUMPER SETUPS
GATE 05
BODY BUILD - OPTIONAL BUMPER SETUPS
GATE 06
STANDARD Full polycarbonate bumper (RTR)
OPTION 1 Center plastic bumper, polycarbonate sides
(Trim body on dotted lines shown)
OPTION 2 Full plastic bumper
(Remove polycarbonate bumper)
17
33.656906, -117.700602
x2 x1
x1
x1
x1 42244
D-Ring,
Molded
42244
Trailrunner
Bumper, Left
42244
Trailrunner
Bumper, Center
42244
Trailrunner
Bumper, Right
42244
Trailrunner
Fairlead
x2
x2
41079
2.5x6mm,
SHCS
31532
3x8mm,
BHCS
x2
x4
91158
3x4mm
BHCS
25211
3x10mm
BHCS
x2 25188
3x20mm
BHCS

DECAL PLACEMENT
GATE 01
18
x1 42242
Trailrunner
Decal Sheet
1
1
3
3
5
5
2
2
4
4

19
33.656906, -117.700602
IFS Arms
4677
25211
25215
31509
42019
42040
42041
42062
42069
42202
42214
42216
42218
42227
42229
89203
91560
91563
10
10
10
10
10
1
1
1
4
1
3
1
1 ea.
2
1
10
4
4
M4x16mm Set Screw
M3x10mm BHCS
Locknuts, M3
M2x3mm BHCS
M2x11mm Driveshaft Pins
Enduro Rod Ends, Set
Enduro Pivot Ball Set
Enduro Caster and Steering Blocks Set
Enduro Wheel Hexes, 6mm
Enduro IFS Suspension Arms Set
Enduro IFS Links, 32mm
Enduro IFS Ballstuds, 5.8mm Set
Enduro IFS Steering Plates
Enduro IFS Universals 55mm
Enduro IFS Hinge Pins Set
M3x16mm BHCS
FT M5x10x4mm Bearings
FT M10x15x4mm Bearings
IFS Steering
7337
25187
25211
25215
31531
42040
42041
42201
42214
42215
42216
42217
89202
89203
91568
4
10
10
10
10
1
1
1
3
1
1
1
10
10
4
Washers, .250 x .125 x .015
M3x14mm BHCS
M3x10mm BHCS
Locknuts, M3
M3x6mm BHCS
Enduro Rod Ends, Set
Enduro Pivot Ball Set
Enduro IFS Steering Bellcranks
Enduro IFS Links
Enduro IFS Servo Horn
Enduro IFS Ballstuds, 5.8mm Set
Enduro IFS Steering Rack
M3x12mm BHCS
M3x16mm BHCS
M4x8x3mm Bearings
42202
4677
4677
42040
42040
42040
42214
42227
91563
91560
42019
89203
42041
42202
42229
42069
25215
25215
42062
42218
42216
25211
42229
31509
42217
91568
91568
91568
91568
31531
31531
42214
42041
42041
89202
89203
25215
25215
42217
42217
42217
7337
25187
25187
42216
Silver
42216
Silver
7337
42040
42040
25211
42201 42201 42215
42216
Silver
42216
Silver

Shocks
20
6299
42081
42083
42080
42080 42080
42089
42230
42201
42080
42081
42081
42081
42082
5407
5407
42040
4204142041
6299
5407
6299
42040
42041
42054
42055
42080
42081
42082
42083
42085
42086
42087
42088
42089
42090
42091
42201
42230
8
12
2
1
10
4
4 ea.
1
2
2
2 ea.
2
2
2
2
2
2
4
2
O-Rings, Red, Silicone
E-Clipp, 1/8”
Enduro Rod Ends
Enduro Pivot Balls Set
FT Enduro Pivot Ball, Steel
FT Enduro, Shock Bushing, Steel
Enduro Shock Parts
Enduro Shock Internals
Enduro Shock Body, Silver, 10x32mm
Enduro Shock Shaft, 3x30mm
Enduro Shock Parts, Blue Aluminum
FT Enduro Shock Body, Bronze, 10x32mm
Shock Spring, Green 0.71 lb/in, 63mm Long
Shock Spring,White, 0.95 lb/in, 63mm Long
Shock Spring, Gray, 1.49 lb/in, 63mm Long - KIT
Shock Spring, Blue, 2.09 lb/in, 63mm Long
Shock Spring,Yellow, 2.47 lb/in, 63mm Long
IFS Shock Bump Stops
Shock Spring, Black, 4.75 lb/in, 63mm Long
IFS Front End
7337
25202
25203
25211
31541
42065
42066
42200
42203
42204
42226
42228
89202
89203
89208
91474
91560
4
10
10
10
10
1
1
1
1
1
2
1
10
10
10
4
4
Washers, .250 x .125 x .015
M3x10mm FHCS
M3x12mm FHCS
M3x10mm BHCS
M3x6mm FHCS
Enduro Ring Gear, 30T
Enduro Pinion Gear, 8T
Enduro IFS Gearbox
Enduro IFS Gearbox and Servo Mounts
Enduro IFS Skid Plates
Enduro IFS Outdrives
Enduro IFS Bulkhead Brace
M3x12mm BHCS
M3x16mm BHCS
M3x14mm FHCS
M7x14x3.5mm Bearings
FT M5x10x4mm Bearings
4
4
89203 25202
42203
42204
42204
42228
25211
25211
7337
7337
42203
42203 42203
42203
42203
31541
25203 25203
25211
25211
25211
25211
25211
89202
42200
42200
89208
89208
91560
42066
42226
42065
91474
91474
42226