ELICTO ES-230 User manual

ES-230
Electric Spraying
Mop And Polisher
Give you a clean life
It's easier to mop the floor
Ergonomic
Please read this manual carefully before operation.
[email protected]
Eco Sourcing Inc.
Elicto is registered trademark in USA and protected from
unauthorized access of use
61 Willet St. Unit#qq, Passaic, NJ 07055
Questions or Comments Please Email Us
www.myelicto.com

3
2
09
10
08
01
02
07
06
W
M
04
03
05
01.
02.
03.
04.
05.
06.
07.
08.
09.
10.
Water Inlet
Main Body
Water Volume
Measuring Cup
Water-jet Nozzle
Middle-Piece
Water
Mopping
1. Install the handle
A. Put the aluminium tube into the bottom of the handle.
B. Rotate the aluminium alloy tube until it gets locked in the handle.
2. Install the main body
A. Connect the terminal of the aluminium alloy tube to the port which is on side
of the main body(see picture 1).
B. Put the aluminium alloy tube into the product body.
C.Rotate the aluminium alloy tube until it gets locked in the handle(see picture 2).
Assembling
Picture 1 Picture 2
Buckle
Plates
1
The wiring for this unit has already
been installed. Do Not pull on the
wires as it may unplug from main
unit.

5
4
Charging: Red light
Completed: Green light
Notice
In order to make sure for safe use, preventing harm, avoiding product damage and
keeping your safety, please read carefully the following content before operating.
Attention
Warning
Don’t disassemble and
transform this product
by yourself, except
our technicist.
Don’t use the product
in the place with much
water or other liquid.
If it smokes during
working, please turn
off the switch and contact
the seller immediately.
Warning
Do not press strongly on the
main engine or let the rotary
plates into edges. If the motor
stop working for the overload-
ing, turn off the switch and turn
on again.
(Please charge it if it isn’t
working even though you turn
on switch again.)
Don’t press it strongly
or stand on it.
Notice
Don’t knock machine
too hard under the
sofa or other furniture
Fobit to put water.
Don’t put water into
the rotary plates.
Warning
Please prevent the
power line and other
stuffs from entering
into the rotary plates.
Please prevent it form
lager resistance and
severe pollution.
Temperature increaseas in the
long continuous uniterrupted
runing process of the motor. The
over-temperature protectionstars
will work to stop the machine.
(Please turn off the switch, cool
down the product naturally before
using it again.)
The proper using
time is about
25-40 mins.
Notice
Please turn off the switch before charging
-Full Charge: Around 3 hours
-Red Light on Adaptor: Charging
-Green Light on Adaptor: Charge completed
Please take down the
adaptor after finishing
charging.
Warning
Notice
Notice
Notice
Warning
Warning
Warning
Warning

7
6
It can be viewed here to
check whether there is
sufficient water or not.
Accordingly, take actions
to add enough water.
Open the lid of water bottle, and pour 260ml
(one cup of measuring cup) water into it.
Please do not plug the
water-jet nozzle.
60W
260ML
Rated Power
Bottle Volume
Item Electric spraying mop and polisher
The function of spraying
We reserve the rights to continuously change the product design
and improve the product technology.
*
Input AC 100V-240V, 50/60HZ
Output DC 16.8V, 1.5A
ES-230
Around 3 hours/Around 30mins
Lithium-ion 14.8V, 2200mAh
Model NO
Adaptor
Charging Time
Using Time
Batter
Product Weight
Product Size(mm)
Materials
RMP(no-load)
Microfiber Pad Size
Materials
Purpose
3.5Kg
420*210*1300(mm)
ABS
250RMP/MIN
Dia 220mm/Microfiber
Use for home cleaning
Specification