Makita Wax-Mate 9200Y User manual

MODEL 9200Y
INSTRUCTION MANUAL
SPEC IF I CAT1 0 N S
Sponge dia. I Orbits per min. I Dimensions (Dia. x Height) I Net weight
125 mm (5") I
7,000
114 mm x 95 mm
14-1 12" x 3-34',)
~
1
0.5 kg (11 Ibs)
* Manufacturer reserves the right to change specifications without notice.
Note: Specifications may differ from country to country.

IMPORTANT
SAFETY INSTRUCTIONS
(For All Tools)
READ ALL INSTRUCTIONS.
1. KEEPWORK AREA CLEAN. Clutteredareasand benchesinviteinjuries.
2. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with
grounded surfaces. For example; pipes, radiators, ranges, refrigerator
enclosures.
3. KEEP CHILDRENAWAY. Do not let visitors contact tool or extension
cord. All visitors should be kept away from work area.
4. STORE IDLE TOOLS. When not in use, tools should be stored in dry,
and high or locked-up place
- out of reach of children.
5. DON'T FORCE TOOL. It will do thejob better and safer at the ratefor
which
it was intended.
6. USE RIGHTTOOL. Don't force small tool or attachment to do thejob
of a heavy-duty tool. Don't use tool for purpose not intended
- for
example
- don't use circular saw for cutting tree limbs or logs.
7. DRESS PROPERLY. Do not wear loose clothing or jewelry. They can
be caught
in moving parts. Rubber gloves and non-skid footwear are
recommended when working outdoors. Wear protectivehair covering
to contain long hair.
8. USE SAFETY GLASSES.Also use face or dust mask if cutting opera-
tion is dusty.
9. SECURE WORK. Useclamps or a vise toholdwork. It's safer than using
your hand and
it frees both hands to operate tool.
10. DON'T OVERREACH. Keep proper footing and balance at all times.
11. DISCONNECT TOOLS. When not in use, before servicing, and when
changing accessories, such as blades, bits, cutters.
12. REMOVEADJUSTING KEYS AND WRENCHES. Form habit of check-
ing to see that keys and adjusting wrenches are removed from tool
before turning
it on.
13. AVOID UNINTENTIONALSTARTING. Don't carry tool with finger on
switch. Be sure switch is off when plugging
in.
14. STAY ALERT. Watch what you are doing. Use commonsense. Do not
operate tool when you are tired.
L

15. CHECK DAMAGED PARTS. Before further use of the tool, a guard or
other part that is damaged should be carefully checked to determine
that
it will operate properly and perform itsintended function. Check
for alignment of moving parts, binding of moving parts, breakage of
parts, mounting, and any other conditions that may affect itsopera-
tion.
A guardor other part that isdamagedshould be properlyrepaired
or replaced
by anauthorized service center unlessotherwise indicated
elsewhere
in this instruction manual. Havedefective switches replaced
by authorized service center.
Do not use tool if switchdoes not turn
it on and off.
3

ADDITIONAL SAFETY RULES
1. Use only 12 volt DC power source, or the motor will be damaged.
2. Operate the tool only after removing mud and sand from the car body and
3. Do not wet the tool, or the tool will be damaged.
4. Do not bear down the tool excessively during operation. Smooth and even
operation cannot be performed because the bottom of the sponge
will not
move correctly as designed.
5. Do not place the tool directly on the ground. Mud and/or sand may stick to
the sponge and scratch the car body.
6. Do not place the tool on the car body, the tool may fall from the car body
and bedamagedor causedamagetothe car. Usethe plastic caseas explained
on page
6.
7. Do not leave the tool in hot places such as a car exposed to direct sunlight
and withthedoors and windows closed. This can cause discoloration andlor
damage to the tool enclosures.
8. Wipe the tool off with a soft cloth dampened in detergent solution. Never
use thinner or benzine. This can cause discoloration and cracks
in the tool
enclosures.
9. Lettheengineof the car idletomaintain thecharge in thecar's battery when
using the tool for a long time.
sponge, or the car body will be scratched by mud and sand.
SAVE THESE INSTRUCTIONS.
4

Installingsponge
CAUTION :
Always be sure that the tool is switched off and unpluggedbefore installing or removing
the sponge.
Simply attach the sponge to the pad, using
the Velcro sheet on the sponge and the pad.
(Note)
There
is no problem even if the alignment
of the sponge and the pad
is slightly off. So
you do not have to align the center of the
sponge to the center of the pad accurately
when installing the sponge.
Applying wax to sponge
Apply wax to the entire surface of sponge
thin and evenly.
(Note)
When applying hard or presoftened paste
wax to the sponge, use the spatula pro-
vided.
Connecting to power source
Be sure that the tool's switch is off. Then
insert
its plug into the cigarette lighter
socket of your car.
Velcro
\
I Sponge
\
Pad
For hard or
presoftened
paste wax
For liquidwax
Plug
I
Cigarette lighter socket
5

Operation r
1. Waxing
Switch on the tool. Move the tool slow-
ly over the work surface with front to
back, side toside movement while apply-
ing light pressure to
the tool so that wax
will be applied to the work surfacethin
and evenly.
Apply light pressure
a
Move slowly
(Note)
*Do not bear down the tool excessively during operation. Smooth and even waxing
cannot be performed because the bottom of the sponge will not move correctly as
designed.
*The tool may become hot during operation. This
is a normal condition and does not
indicate
a problem.
I
When resting the tool, use the handy
plastic case provided
so that mudand/or
sand will not stick tothe sponge.
/
Plastic case
Buff the driedwax by rubbing the car body surfacewith a clean, soft and dry cloth.
2. Removingstubborn dirt and oil film
For removing stubborn dirt from the car body surface and oilfilmfromthewindshield,
apply the appropriate polish/cleaner for the application to the sponge and operate the
tool inthe same manner
as waxing.
(Note)
When changing from the use of wax, polish or cleaner, always wash the sponge in
detergent solution before starting the nextjob.
6

MAINTENANCE
CAUTION :
Always be sure that the tool is switched off and unpluggedbefore attempting to perform
inspection and maintenance.
After use
1
Always remove the sponge from the tool
and wash the sponge indetergent solution.
Dry the sponge thoroughly in
a breezy
shaded area.
(Note)
0 If you do not wash the sponge after each
use, the wax absorbed in the sponge will
dry and the sponge will become heavier,
less porous and dirty. This could cause
greater vibration of the tool, resulting
poor finish.
I
Never use an electric washer
to clean the sponge.
0 Do not wash the sponge too harshly, or the Velcro sheet on the sponge will come off.
Wipe the tool off with the soft cloth dampened in detergent solution. Never use thinner
or benzine.
Storage
Beforestoring the tool, remove moisture from the tool and dry the sponge thoroughly.
(Note)
Store the tool with the sponge removed, or the sponge may be deformed.
To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment
should be performed by Makita Authorized or Factory Service Centers, always using
Makita replacementparts.
7

ACCESSORIES
CAUTION :
These accessories or attachments are recommended for use with your Makita tool specified in this
manual. The use
of any other accessories or attachments might present a risk of injury to persons.
The accessories or attachments should
be used only in the proper and intended manner.
*Spatula
Part
No. 414599-3
Plastic case
Part
No. 824334-5
Waxing sponge
Part
No. 794498-8
Q
8

Aug.-22-'91 US
WAX-MATE
Model
9200Y
P
Note: The switch and other part configurations
may differ from country to country.
9

MODEL 92OOY Mar.-14-'90 EN
10
11
12
MACHINE
71
81
91
1
1
2
41
51 1
61 1
Tapping Screw BT 4x35
Housing Set 1Wtth Item 81
Switch
DC Motor 12 '4.
Ball Bearing609LB
Cushion Rma
Bumper
Housing Set (With Item 2)
Name Plats
Pad
Cord
Foot 1Ai
Note: The switch and other part specifications may differ from country to country.
10

P
MAKCTA LIMED ONE YEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to
be free of defects from workmanship and materials for the period of ONE YEAR from the date
of
original purchase. Should any trouble develop during this one-year period, return the COMPLETE
tool, freight prepaid, to one of Makita’s Factory or Authorized ServiceCenters.
If inspection shows
the trouble is caused by defective workmanship or material, Makita will repair (or at our option,
replace) without charge.
This Warranty doesnot apply where:
repairs have been made or attemptedby others:
repairs are required because of normal wear and tear:
The tool has been abused, misused or improperly maintained;
alterations have been made to the tool.
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR CON-
SEOUENTIAL DAMAGES FROM THE SALEOR USE OFTHE PRODUCT.THIS DISCLAIMER
~~~~~ ~~ ~.~
APFiiFsioTH DURING-AND AFTER THETERMOF THIS WARRANTY.
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED WARRANTIES, INCLUDING IMPLIED
WARRANTIES
OF “MERCHANTABILITY” AND “FITNESS FOR A SPECIFIC PURPOSE,”
AFTER THE ONE-YEAR TERM OFTHISWARRANTY.
This Warranty gives you specific legal
rights, and you may also have other rights which vary from
state to state. Some states do not allow the exclusion or Limitationof incidental or consequential
damages,
so the above limitation or exclusion may not apply to you. Some states do not allow
limitation on how long an implied warranty lasts,
so the above limitation may not apply to YOU.
Makita Corporation
3-11 -8, Sumiyoshi-cho,
Anjo, Aichi
446 Japan
883735A068
PRINTED IN JAPAN
1992 - 7 - N