ELIKA 460 User manual

1
2
CAREFULLY UNPACK & CHECK THE CONNECTIONS
1. REMOVE THE SECURITY SCREWS
*INSTALLED OPTIONS
APPEAR ON BOX
2. REMOVE THE MAIN BOARD
3. ROUTE THE WIRES
RE-INSTALL THE MAIN BOARD
ROUTE THE POWER AND CONTROL WIRES
37 ELIKA TECHNICAL SUPPORT 1.949.208.3600ELIKA TECHNICAL SUPPORT 1.949.208.3600
MISCELLANEOUS
CALL BUTTON LABELS
FUSE KIT
TRANSFORMER
FOR TECH SUPPORT CALL:
[phone]
WWW.ELIKAACCESS.COM
ELIKA 460 MANUALS
INSTALLATION INSTRUCTION MANUAL
WEB APPLICATION MANUAL
UNIT ACTIVATION CARD
STANDARD GOOSENECK
PEDESTAL INSTALLATION
RECOMMENDED.
IF ALTERNATE MOUNTING IS
REQUIRED, ALLOW SPACE FOR
ANTENNA.
WITHOUT PROPER SPACING,
SIGNAL MAY BE INTERRUPTED.
TOOLS
SECURITY SCREW DRIVER
QUICK SETUP GUIDE:
! IMPORTANT: It is recommended to BENCH TEST this unit by performing the Quick setup procedures below, adding a new user(s) and testing communications. In this manner, if there are any communication
concerns experienced after the installation, troubleshooting efforts can be focused towards evironmental variables.
! IMPORTANT!
ELIKA 460 REQUIRES
ACTIVATION BEFORE USE.
SEE THE ACTIVATION CARD
FOLLOW THE PROMPTED
INSTRUCTIONS AT:
www.elikacloud.com
! IMPORTANT!
AUTOMATIC GATES CAN CAUSE
SERIOUS INJURY OR DEATH!
THE GATE PATH MUST BE
CLEAR BEFORE OPERATING!
SAFETY DEVICES SHOULD BE
INSTALLED TO ENSURE
PROPER USE.
! WARNING

3
1
1
2
2
3
3
4
4
5
5
4 5
2A
2A
COM
RED
(5V)
BLACK
(GND)
GREEN
(DATA 0)
WHITE
(DATA 1)
N.O.
COM
N.O.
ELIKA’S COMM
EXPANSION BUS
+
-
COM
NO
RELAY OUTPUT 1
RELAY OUTPUT 2
INPUT STATION
EXTERNAL DEVICE
EXPANSION BUS
1. CONNECT YOUR POWER SUPPLY
1. REGISTER DEVICE AT:
www.elikacloud.com
a. FOLLOW ONLINE PROMPT
2. INPUT CODES:
a. SERIAL NUMBER
b. REGISTRATION CODE
c. FOLLOW ONLINE PROMPT
d. ACTIVATE AND PICK PLAN
FOR MORE INFORMATION REFER
TO THE MANUAL
2. RECONNECT THE MAIN BOARD
AND CLOSE THE UNIT
CONNECT YOUR POWER SUPPLY APPLICATION SETUP
IMPORTANT: It is recommended to BENCH TEST this unit by performing the Quick setup procedures below, adding a new user(s) and testing communications. In this manner, if there are any communication
concerns experienced after the installation, troubleshooting efforts can be focused towards evironmental variables.
QUICK SETUP GUIDE:
! IMPORTANT: It is recommended to BENCH TEST this unit by performing the Quick setup procedures below, adding a new user(s) and testing communications. In this manner, if there are any communication
concerns experienced after the installation, troubleshooting efforts can be focused towards evironmental variables.
37 ELIKA TECHNICAL SUPPORT 1.949.208.3600ELIKA TECHNICAL SUPPORT 1.949.208.3600
CONFIRM THAT THE UNIT HAS
THE PROPER POWER BEFORE
TRYING TO OPERATE.
FOR ADDITIONAL INFORMATION
ON POWER OPTIONS REFER TO
THE INSTALLATION MANUAL.
! STOP!
ENSURE THAT ALL
COMPONENTS ARE PROPERLY
CONNECTED AND MOUNTED
TO THE UNIT.
FOR ADDITIONAL INFORMATION
REGARDING INSTALLATION
REFER TO THE MANUAL.
! IMPORTANT!
CONNECT YOUR ACCESSORIES