Elite Gourmet EPB-1800 User manual

17PC PERSONAL
DRINK BLENDER
INSTRUCTION MANUAL
Before operating your new appliance, please read all instructions carefully and keep for
future reference.
MODEL: EPB-1800/EPB-1800A
Questions? Elite's customer service team is ready to help.
Call us toll-free at 800-365-6133 ext. 120/105.
For more Elite products, visit us at www.maxi-matic.com.
Recipes are included in this manual.

2 Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
IMPORTANT SAFEGUARDS
The Elite Brand takes consumer safety very seriously. Products are designed and
manufactured with our valued consumers’ safety in mind. Additionally, we ask that
you exercise a level of caution when using any electrical appliance by following all
instructions and important safeguards.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE
REFERENCE
WARNING: When using electrical appliances, basic safety precautions should
always be followed as below:
1. WARNING: To avoid the risk of
electrical shock, always make sure
the product is unplugged from the
electrical outlet before assembling,
disassembling, relocating, servicing,
or cleaning it.
2. This product is intended for use
in processing foods for human
consumption. Do not use the
product for any other purpose.
3. Do not leave the product unattended
while in use. Always unplug the
product from the electrical outlet
when not in use.
4. Keep the Power Cord and product
away from heated surfaces.
5. Do not submerge product base in
or expose it to water or any other
liquids.
6. Do not use this appliance outdoors.
7. Do not use attachments not
recommended or sold by the product
manufacturer.
8. Use extreme caution when handling
the Blade assembly as the blades are
extremely sharp. Use caution when
attaching or detaching the Blade
assembly.
9. Do not touch moving parts (e.g., the
Blades) while the product is in use.
Keep hands and utensils away from
the moving blade assembly while
operating the product.
10. Before disassembling the product,
unplug it from the electrical
outlet and ensure the Blades have
completely stopped.
11. Do not plug or unplug the product
into/from the electrical outlet with a
wet hand.
12. To disconnect from an electrical
outlet, pull directly on the plug; do
not pull on the Power Cord.
13. Unplug the product from the
electrical outlet prior to putting on
or removing parts.
14. Never operate this product if it has a
damaged Power Cord or plug, is not
working properly, has been dropped
or damaged, or if the Base has been
exposed to water or other liquids.
Do not attempt to examine or repair
this product yourself. Only qualied
service personnel should perform
servicing. Take the product to an
appliance repair shop of your choice
for inspection and repair.
CAUTION-- To reduce the risk of
personal injury or product damage:
15. Do not allow the Power Cord to
hang (e.g., over the edge of a table
or counter) where it may be tripped
over or pulled.
16. Always place the product on a at,
level, stable surface.
17. Keep the product out of the reach of
children and pets. This product is not
intended for use by children.
18. This product is intended for indoor,
non-commercial, non-industrial,
household use only.

3
Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
IMPORTANT SAFEGUARDS (cont.)
SPECIAL INSTRUCTIONS:
a) To avoid a circuit overload when using this product, do not operate another
high-wattage product on the same electrical circuit. b) If an extension cord is used
with this product, a 10-amp extension cord should be used. Extension cords rated
for less amperage may overheat. The marked electrical rating of the cord set or
extension cord should be at least as great as the electrical rating of the product.
SAVE THESE INSTRUCTIONS.
THIS PRODUCT IS FOR
HOUSEHOLD USE ONLY.
SHORT CORD PURPOSE
POLARIZED PLUG
If the plug still does not t, contact a
qualied electrician. Never use the plug
with an extension cord unless the plug
can be fully inserted into the extension
cord. Do not alter the plug of the
product or any extension cord being
used with this product. Do not attempt
to defeat the safety purpose of the
polarized plug.
If this appliance is equipped with a
polarized plug (one blade is wider than
the other), please follow the below
instructions:
To reduce the risk of electrical shock,
this plug is intended to t into a
polarized outlet only one way. If you
are unable to t the plug into the
electrical outlet, try reversing the plug.
If an extension cord is used: (1) the
marked electrical rating of the extension
cord should be at least as great as the
electrical rating of the product; (2) the
extension cord should be arranged so
that it will not drape over the counter
top or tabletop where it can
unintentionally be pulled on or tripped
over by children or pets.
Note: A short power cord is provided
to reduce the risk of personal injury
resulting from becoming entangled in or
tripping over a long cord.
Longer power-supply cords or
extension cords are available and
may be used if care is exercised in
their use.

4 Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
PARTS IDENTIFICATION
A. Power Switch
B. Base (1)
C. Power Cord
D. Cross Blade Assembly (1)
E. Drinking Cap
F. Removable Spill-proof Lids (4)
G. Foam Grips (4)
H. Grinder Cup (1)
I. Mixing Cup (4)
J. Flat Blade Assembly (1)
NOTE: Before using the product for the rst time, disassemble and thoroughly wash and dry
all accessories (EXCEPT the main Base) such as the cups, blade assembly and spill-proof lids.
WARNING: Ensure the product is unplugged from the electrical outlet before assembling it.
Handle the Blade assembly with care as the blades are extremely sharp. Use caution when
attaching, detaching, cleaning, or storing the Blade assembly.

5
Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
HOW TO USE
CHOPPING & BLENDING:
1. Ensure the product is unplugged from the electrical outlet.
2. Place the Base on a at, level, stable surface.
3. Fill the Small Cup or the Large Cup with the food that you
wish to chop/blend.
4. Screw the Flat Blade assembly or Cross Blade assembly
clockwise onto the Small or Large Cup until secure.
5. Turn the Chopper Cup Assembly upside down so that the
Blade assembly is on the bottom. Attach the assembled
Chopper by aligning the three tabs on the outside of the
Small or Large Cup with the three notches on the top inner
edge of the Base.
6. Plug into a standard 120-volt AC electrical outlet.
7. Each Cup Assembly has three small tabs which t into three
grooves on the top lip of the Base. Press down on the Cup
Assembly rmly and turn it counter-clockwise to lock into
place. Press and hold the Power Pulse switch to operate. To
prevent product overheating, limit continuous operation to
ve seconds at a time.
8. To stop processing, let go of the Power switch. Wait until
the Blades stop completely before removing the Cup
Assembly, then turn it clock-wise to unlock it from the Base.
9. Unplug the product from the electrical outlet when it is not
in use or is left unattended.
NOTE:
Ensure that the rubber
gasket, located on the
inside bottom edge of
the blade assembly,
is in place. This will
prevent leaking.
CAUTION:
The product is not
intended for blending
hot liquids or frozen
solid ingredients. It
is recommended to
chop ingredients into
smaller portions
before freezing and
then allowing the
ingredients to defrost
slightly before mixing.
Large frozen solid
ingredients may
damage the cups. Use
crushed ice instead of
solid ice cubes.
-
USING DRINKING CUPS:
1. Ensure the product is unplugged from the electrical outlet.
2. Place the Base on a at, level, stable surface.
3. Add the ingredients that you wish to include in your drink
into one of the Drinking Cups. If attached, remove the
spill-proof lids before installing blade assembly.
4. Screw the Cross Blade assembly onto the Drinking cup.
5. Turn the Drinking cup so that the Blade assembly is on the
bottom. Attach the assembled Drinking cup by aligning the
3 tabs on the sides of the Drinking cup with the 3 notches
on the top inner edge of the Base.
6. Plug into a standard 120-volt AC electrical outlet.
7. Each Cup Assembly has 3 small tabs that t into 3 grooves
on the top lip of the Base. Press down on the Cup Assembly
rmly and turn it counter-clockwise to lock into place. Press
and hold the Power switch to operate. To prevent product
overheating, limit operation to ve seconds at a time.
8. To stop processing, let go of the Power Switch. Wait until
the Blades stop completely before removing the Cup
Assembly; turn it clock-wise to unlock from the Base. Turn
the Drinking Cup so the Blade Assembly is on top. Unscrew
the Blade Assembly from the Drinking Cup; screw a Spill-
proof Lid onto the threads on the top of the Drinking Cup.
9. Unplug product from the electrical outlet when not in use.
-The Cup Assembly
MUST be locked in
order to operate.
5
NOTE:
The Cup Assembly
must be locked in
order to operate.
For liquid ingredients,
do not ll the
containers to their
maximum capacity.
Overlling the Cups
could result in
spillage, causing
burns and/or
property/product
damage. A maximum
of ¾ of the capacity is
recommended.
-
-
-

6 Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
HOW TO USE (cont.)
IDEAS:
The personal drink blender is not exclusively meant for blending
drinks. There are a number of uses for this appliance.
• Use the Flat Blade for chopping dry ingredients.
• Use the Cross Blade assembly to blend wet ingredients.
> Chop nuts
> Grate cheese
> Scramble eggs for omelets
> Blend fresh baby food
> Blend salad dressing
CAUTION:
To avoid the risk
of electrical shock,
always ensure the
product is unplugged
from the electrical
outlet before cleaning,
servicing, assembling,
disassembling or
relocating it.
Handle the blade
assembly with care
as the blades are
extremely sharp.
Use caution when
attaching, detaching,
cleaning, or storing
blade assembly.
-
> Chop vegetables
> Make bread crumbs
> Blend dips
> Blend sauces
> And much more…
CLEANING & MAINTENANCE
• Always clean the product immediately after each use.
• Wash all parts except the Base in warm, soapy water; rinse,
and dry thoroughly. DO NOT wash parts inside a
dishwasher.
• Clean the Base by wiping it with a damp cloth. To avoid
damage to the product, do not immerse the Base into
water or any other liquids or place it in a dishwasher.
• To avoid damage to the product, do not use abrasive
cleaners or scouring pads to clean the product parts.
• Make sure product is thoroughly dry before storing in a
cool, dry place. -