eliving FURNITURE Carson CRSN-SB-NATR User manual

Assembly Instructions
Carson Sofa Bed
Product Code
Carson Sofa Bed CRSN-SB-NATR
Dimensions(W x D x H)
Bed Dimension 153W x 203D x 25H (cm)
Sofa Dimension 153W x 112D x 82H (cm)
Lounge Dimension 153W x 165D x 68 H (cm)
Important
Please read through instruction carefully
Before assembly and keep for future reference.
For our full catalogue of assembly instructions,
Visit: lifely.com.au/assembly.

1.
Keep children and animals
away from working area as
smaller parts may cause chok-
ing if swallowed.
2.
Never place liquids or anything
damp upon furniture as it
will mark. Ensure a coaster or
running is beneath.
3.
Never use ammonia based
cleaning products as it will
damage the finish.
4.
To avoid fading, keep furniture
out of direct sunlight.
5.
Use a soft or damp cloth (dry
cloth) when wiping or cleaning
surfaces.
6.
Two person are required.
7.
Lay a soft matt down to protect
the furniture piece before and
during assembly.
Important Tips and Maintenance
CRSN-SB-NATR 2

So your relationship is strong. But is it flat-pack furniture
strong? Unless you're an aerospace engineer, assembling
furniture can be slightly stressful. We recommend
meditating quietly, pouring yourself a herbal tea
(or slightly less herbal wine) and tackling things one step
at a time. If you feel a passive aggressive remark
coming on, try a compliment instead .E.g."You're so good
looking".
This 3-Step assembly should take around 15 minutes
with an Allen Key-or 8 minutes with an electric drill.
Godspeed.
Designed for everyday
CRSN-SB-NATR 3

Component Hardware---1/2
Please check you have all the fittings
part or tools are listed in below.
No. A
Quantity: 27Pcs
Screw M4x40mm
No. B
Quantity: 4Set
Screw M8x40mm
No. C
Quantity: 2Pcs
Allen Key N5
CRSN-SB-NATR 4

⑥
④
⑤
①
②
③
⑦
⑧
④
⑤
⑤
⑨
Component Part List
Please check you have all the parts are listed below.
1. End left rail---------------x1-Carton 1/2
2. End right rail-------------x1-Carton 1/2
3. End middle rail----------x1-Carton 1/2
4. End side slats-----------x2-Carton 1/2
5. End middle slats--------x3-Carton 1/2
6. End front rail-------------x1-Carton 1/2
7. Middle board-------------x1-Carton 1/2
8. Front board---------------x1-Carton 1/2
9. Mattress-------------------x1-Carton 2/2
CRSN-SB-NATR 5

⑥
STEP 1
STEP 2
No. A
Quantity. 6Pcs
Screw M4x40mm
A
A
CRSN-SB-NATR 6
No. A
Quantity. 21Pcs
Screw M4x40mm

⑦
⑧
①
②
STEP 3
STEP 4
B
C
C
BC
C
No. B
Quantity. 4Set
Screw M8x40mm
Quantity. 2Pcs
Allen Key N5
No. C
CRSN-SB-NATR 7

⑨
STEP 5 : Unboxing the mattress from Carton 2.
STEP 6
CRSN-SB-NATR 8
72h
After unboxing, the mattress will naturally regain their shape. We recommend allowing 72 hours for
complete inflation. Additionally, if you notice any wrinkles, you can easily smooth them out by hand.

⑨
STEP 7
STEP 8
CRSN-SB-NATR 9

⑨
STEP 9
STEP 10
CRSN-SB-NATR 10

Don't forget to share how it looks in
your space and tag us on Instagram.
@lifelyhome #homewithlifely!
lifely.com.au
Great job. You're done!
CRSN-SB-NATR 11