Twin-Star International KC4343-C245-42 User manual

1
ATTENTION
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, EMAIL
OR CALL CUSTOMER SERVICE BEFORE YOU RETURN
THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED.
For Customer Service: email: par[email protected]
in English Call: 866-485-7879
in Spanish Call: 866-485-7879
in French Call: 866-634-0147
ATENCIÓN
SI TIENE ALGÚN PROBLEMA O PREGUNTAS,
ENVÍE UN MENSAJE DE CORREO ELECTRÓNICO O LLAME AL SERVICIO
DE ATENCIÓN AL CLIENTE ANTES DE DEVOLVER
ESTE PRODUCTO A LA TIENDA EN LA QUE LO COMPRÓ.
Servicio de atención al cliente: Correo electrónico: par[email protected]
Línea para llamadas en inglés: 866-485-7879
Línea para llamadas en español: 866-485-7879
Línea para llamadas en francés: 866-634-0147
STOP STOP
PARE PARE
ATTENTION
SI VOUS AVEZ DES PROBLÈMES OU QUESTIONS,
ENVOYEZ UN COURRIEL AU SERVICE À LA CLIENTÈLE OU APPELEZ LE
SERVICE À LA CLIENTÈLE AVANT DE RETOURNER
CE PRODUIT OÙ VOUS L’AVEZ ACHETÉ.
Pour le service à la clientèle : courriel : par[email protected]
pour le service en anglais, composez le 866-485-7879
pour le service en espagnol, composez le 866-485-7879
pour le service en français, composez le 866-634-0147
ARRÊT ARRÊT
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION À L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION À L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO

1
Français p. 17
KITCHEN CART
KC4343-C245-42
INSTRUCTION MANUAL
E-mail: [email protected]
In English call: 866-485-7879
In French call: 866-634-0147
In Spanish call: 866-485-7879
For Customer Service:
Twin-Star International, Inc.
Delray Beach, FL 33445
Made in China
Printed in China
Españo p. 9

2
Part Description Quantity
A Base 1
B Left Door 2
C Right Door 2
D middle divided panel 1
E Left Side Panel 1
F Right Side Panel 1
G Top 1
H Interior wood shelf 2
I Left Connect block 1
J Right Connect block 1
K Towel Rack 1
L Exterior side wood shelf 2
M Cutting Board 1
N Spice bottle Rack 1
O Silverware Rack 1
P Dividers 3
PACKAGE CONTENTS
D
JB
B
A
F
G
O N
P
E
K
QQ
QQ
H
HC
C
I
L
L

3
HARDWARE CONTENTS
Part Description
Hex screw
Hex screw
Flat Washer
Screw
3x12mm
Screw
4x12mm
Nut
Camlock
(O-1,O-2)
Allen Key
Wood Dowel
Knob (with bolt)
Shelf Pin
Shelf Pin
Caster
Caster
(with stopper)
8
8
16
O-1
O-2
40
16
8
4
1
14
8
8
8
2
2
Quantity Picture
CC
FF
GG
HH
II
JJ
AA
BB
EE
KK
LL
MM
NN
OO
PP
DD
Cap (with bolt)
sponge cushions
2
4
Touch-up Pen 1
ZZ

4
ASSEMBLY INSTRUCTIONS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors and utility knife
SAFETY INFORMATION
WARNING
• Before assembly, carefully use scissors or utility knife to cut and unwrap all parts.
Make sure you do not discard the hardware.
CAUTION
• Use care in assembling your new kitchen cart. Take your time and use the
hardware provided and a quality Phillips head screwdriver. Never overtighten bolts.
• Do not sit on any part of the kitchen cart.
• All panels are labeled left and right as viewed from the front of unit.
Fig. 1
1. Insert wood dowels (CC) into the holes in the Base
(A) and insert Nut (NN) into the bottom of panels
(D, E, F). Push the Left / Right side panels (E, F),
middle divided panel (D) snug to the Base as shown
in diagram. Screw Hex screw (AA) into Flat Washer
(BB) with Allen Key (DD) through the base to
connect them, make sure them screw in the nuts.
Hardware Used
BB
AA
CC
DD
NN
Hex screw x 8
Flat Washer x 8
Wood Dowel
Allen Key
Nut
x 6
x 1
x 8
E
A
DF
DD
AA
BB
NN
CC

5
Fig. 2
2. Crew 2 caster (II) and 2 caster (JJ) with screw (MM)
on the base, use Phillips head screwdriver to tighten
the screws.
Hardware Used
JJ
II
MM
Caster x 2
Caster
(with stopper) x 2
Screw x 16
JJ
JJ
II
MM
Fig. 3
Fig. 4
HH
H
LL
G
CC
CC
BB
EE
4. Choose desired height of Interior wood shelves (H)
and place the Shelf Pins (HH) into same height shelf
holes inside side panels. Insert Wood Shelves (H),
allow Wood Shelves (H) to rest on the Shelf Pin
(HH), use Screws (LL) to fix the shelves.
Hardware Used
HH
LL
Shelf Pin
Screw
x 8
x 8
Hardware Used
CC Wood Dowel x 6
EE Hex screw x 8
3. Insert one Wood Dowel (CC) into each of the
pre-drilled holes in the underside of Top (G) and lay
finished side up on top of completed assembly 2.
From the inside, attach the top (G) using Hex screw
(EE) and Washers (BB) through the pre-drilled holes
in the mounting blocks.
BB Flat Washer x 8

6
Hardware Used
FF Knob (with bolt) x 8 FF
BC
Fig. 5
Fig. 6
Fig. 7
Hardware Used
Hardware Used
QQ
GG
Cap (with bolt)
Shelf Pin
x 2
x 8
QQ
QQ
J
I
K
L
GG
7. screw the Cap (QQ) through the connect blocks (I, J)
to install the Towel Rack (K).
6. Choose desired height of exterior side wood shelves
(L) and place the Shelf Pins (GG) into same height
shelf holes inside side panels. Insert the exterior
side Wood Shelf (L), allow exterior side Wood Shelf
(L) to rest on the Shelf Pin (GG).
LL
LL
Screw x 32
5. Locate Right Doors (C) and Left Doors (B),
attach the hinge another part to the side panels with
screws (Diagram 1). Slide door hinge keyhole into
panel hinge bracket. Use Phillips Head Screwdriver
to tighten screws. (Diagram 2)
TO ADJUST HINGES
To adjust door forward or backward change
keyhole slot position. (As Shown In Diagram 2a)
To adjust door right or left loosen/tighten screw.
(As Shown In Diagram 2b)
To adjust door up or down adjust bracket height.
(As Shown In Diagram 2c)
Attach the Knob (FF) to the Left Doors (B) and Right
Doors (C) and upper drawers, use the bolts attached
through the pre-drilled holes in the doors. Then use
a Phillips Head Screwdriver to tighten the bolts.
12

7
8. Insert wood dowels (CC) in the holes on the top
side, push the Towel Rack to cart body using the
camlock (O-1, O-2) to connect them. Fig. 8
O-2
CC O-1
Hardware Used
CC
OO
Wood Dowel
Camlock
(O-1, O-2)
x 2
x 4
Fig. 9
Fig. 10
Hardware Used
KK Sponge cushions x 4
N
O
P
KK
10. Put spice bottle rack (N) and silverware Rack (O)
Dividers (P), in drawers once completed assembly,
it’s easy for you to manage your mess kit.
9. strip off the paper from the rear of sponge cushions
(KK), stick it on the four corners of the Silverware
rack (O) from the bottom.

8
11. Along with the cart have a cutting board (M) for you
free. Fig. 11
M

9
Français p. 17
CARRITO DE COCINA
INSTRUCCIÓN DE MONTAJE
English p. 1
Correo electrónico: [email protected]
Línea para llamadas en inglés: 866-485-7879
Línea para llamadas en francés: 866-634-0147
Línea para llamadas en español: 866-485-7879
Servicio de atención al cliente:
Twin-Star International, Inc.
Delray Beach, FL 33445
Fabricado en China
Impreso en China
KC4343-C245-42