ellos 1597644-01 User manual

Page 1
ASSEMBLY INSTRUCTIONS
1597644-01

Description
1
Qty
Tool List
Label Picture
T1
Cabinet
Description
Page 2
H2
Qty
Description Qty
H1
Label Picture
PictureLabel
Component List
A1
8
8
Assembly Prep
* Save all packaging until finished.
*Read Instructions, cover to cover.
*Have 2 adults on hand for assembly.
Allen Key 4 mm
Hardware List
Before Beginning:
Large Allen Bolt M6x16 mm
Leg Frame 2
B
Metal Connector 4
D
Small Allen Bolt M6x10 mm
Flat Washer M8x16 mm
12
H3
Glass Shelves 1
E
Shelf Pin 4
H4
Metal Connector 2
C

Page 3
Step 1
Assembly Steps
Step 2
B
D
C
Place Leg Frame (B) on a non-damaging padded surface. Insert Metal Connector (C) on the provided
tab of Metal Frame (B) then Insert Metal Connector (D) on the the provided tab of Metal Frame (B)
as shown in the picture.
Gently insert the Connector (C) & (D) on to the protruded metal stud on Leg Frame (B) ensuring holes
on the connectors aligned with pre-threaded holes on Leg frame (B). Secure connections using 6 Pcs
Small Allen Bolt (H3). Do not fully tighten all connections yet.
D
B
Gently insert the Leg Frame (B) in to
the metal connector (C) & (D) ensuring
holes on the connectors aligned with
pre-threaded holes on Leg frame (B).
Step 3
D
B
B
C
C

Page 4
Step 4
Assembly Steps
Secure connections using 6 Pcs Small Allen Bolt (H3). Do not fully tighten all connections yet.
Place Cabinet (A) upside down on a non-damaging padded surface. Place Leg Frame (B) on bottom
of Cabinet (A) ensuring holes on the leg frame (B) are aligned with the holes underneath the Desk (A).
Secure all connections using 10 Large Allen Bolt (H1) and 10 Washer (H2) on metal tab as shown above.
Fully tighten all connections using Allen Key (T1).
A
B
Step 5
H1
T1
H2
Careful : Extremely heavy product.
T1
H3

Step 6
Assembly Steps
Turn the product in upright position.
Open the doors and insert shelf pin (H4)
into the Cabinet panel holes and place the
Glass shelves (E) on shelf pins.
Assembly is complete and the product is ready to use.
E
Page 5