Mocka Eliza User manual

Eliza Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Hardware Supplied
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
bolt
x16
x8
AB C D E F G H
JKLM N O P Q
I
dowel
x20
screw
x26
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
S
screw
x12
locking
nut x16
screw
x10
x8
wedge
x3
handle
x2
hinge hinge
x4
shelf
plug
x20
screw bolt
x10
screw
long
R
adjuster
x1
Allen
key
x1

Eliza Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Attach 2x slide rails (F) and 2x slide rails (G) to panels [4] and [5] as shown
and secure with 12x screws (E). Tighten with a screwdriver.
F
CL
E
Attach panels [3] and [5] to panel [6] with 4x dowels (A).
F
G
G
CR
E
E
E
5
4
5
3
A
6

Eliza Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach panels [4] and [5] to panel [6] with 4x dowels (A). Insert 6x bolts (C) into panel [1]. Tighten with a screwdriver.
5
4
3
A
1
C
6

Eliza Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panels [3], [4] and [5] to panel [1] with 6x dowels (A) and secure
with 6x locking nuts (D). Tighten with a screwdriver. Secure 2x panels [6]
to panel [1] with 4x long screws (B). Tighten with a screwdriver.
Slide panels [7] and [18] down along the grooves between the panels [3], [4] and
[5], to form the back of the unit as shown.
A
D
5
4
3
1
B
6
6
7
18
5
4
3
A
D

Eliza Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panel [2] to panels [3], [4] and [5] with 6x dowels (A) and
secure with 6x long screws (B). Tighten with a screwdriver.
Attach 4x legs [8] and support leg [17] to panel [2] and secure with 20x
bolts (L). Tighten with an Allen Key (N). Insert the adjuster (R) into the
middle support leg as shown.
B
A
L
N
L
8
2
5
4
3
2
8
R
R
17

Eliza Entertainment Unit
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Attach 2x hinges (P) to panel [9], securing with 4x hinge screws (S)
and attach 1x handle (O) to panel [9] securing with 2x screws (E).
Tighten with a screwdriver.
Secure panel [9] to the main unit by attaching the other end of the
2x hinges (P) to panel 3, and secure with 8x hinge screws (S) as
shown. Tighten with a screwdriver.
E
S
S
S
S
S
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.
9
O
P
P
P
9
3
P

Eliza Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
12 Drawers x211
Insert 4x shelf plugs (Q) into panels [3] and [5] as shown.
Insert panel [10] and balance on top of the plugs.
Insert 5x bolts (C) into panel [11]. Tighten with a screwdriver.
Attach panels [12], [13] and [14] to panel [11] and secure with 5x
locking nuts (D). Tighten with a screwdriver.
C
D
11
11
12
13
14
Q
10
3
5
D

11
15
12
13
Eliza Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 Drawers x2 14 Drawers x2
Slide panel [15] along the grooves between the panels [12]
and [13] to form the base of the drawer. Attach panels [12],
[13], [14] and [16] as shown using 5x screws (M).
Tighten with a screwdriver.
Attach slide rail (I) and slide rail (H) to the underside of the side panel
as shown. Secure with 4x screws (E) and tighten with a screwdriver.
Attach handle (O) to panel [11] secure with 2x screws (E).
Tighten with a screwdriver.
EO
M
16
12
13
11
13
E
H
I
12
E

V
W
Z
J
K
J
K
Eliza Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Insert the assembled drawers into the corresponding compartments as
shown. Ensure the drawers slide easily along the rails.
Attach 8x wedges (J) into the corners of the back of the unit and secure
with 8x screws (K). Tighten with a screwdriver. Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screws (W). Tighten with a screwdriver.
11
V
Z
W

Eliza Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to the wall
using 1x washer (Z) , 1x wall anchor (X) and 1x wall screw (Y).
X
Y
Z
X
Y
Z
17 18
Ensure unit is balanced and steady before use. You’re done, enjoy!