elsner elektronik P03i/P04i User manual

P03i/P04i d istributors
For WS1, WS1000 and KNX WS1000 Color/Style
Technical specifications and installation
instructions
Part number 30131
Elsner Elektronik GmbH Control and Automation Technology
Sohlengrund 16
D - 75395 Ostelsheim Phone[phone] / 30 945-0 [email protected]
Germany Fax [phone] www.elsner-elektronik.de
EN
Technical Service: +49 (0) 70 33 / 30 945-250

2 Description
P03i/P04i distributor • Version: 15.04.2015 • Technical changes and errors excepted.
1. Description
The P03i/P04i distributor operates four WS1 or (KNX) WS1000 Color/Style controls
with a P03i/P04i-GPS weather station. The weather data is provided to all connected
controls.
Functions:
• Distribution of a weather station's weather data to the four data outputs. Either
a control or a further P03i/P04i distributor can be connected to each data output
(cascading)
• Input suitable for: P03i/P04i-GPS
• Outputs suitable for: WS1 Color, WS1 Style, WS1000 Color, WS1000 Style,
KNX WS1000 Color, KNX WS1000 Style
1.0.1. Deliverables
• Distributor in series installation housing
1.1. Technical specifications
The product is compliant with the provisions of EU guidelines:
2. Installation and commissioning
2.1. Installation notes
Installation, testing, operational start-up and troubleshooting should
only be performed by an electrician.
Housing Plastic
Colour White
Assembly Series installation on mounting rail
Protection category IP 20
Dimensions approx. 107 x 88 x 60 (W x H x D, mm), 6 modules
Weight approx. 450 g
Ambient temperature Operation -20…+70°C, storage -55…+90°C
Ambient humidity max. 95% RH, avoid condensation
Operating voltage 230 V AC, 50 Hz
Power consumption approx. 6 W
Input 1× P03i-GPS or P04i-GPS weather station
Outputs 4× WS1/1000 control systems or
P03i/P04i distributors

3 Installation and commissioning
P03i/P04i distributor • Version: 15.04.2015 • Technical changes and errors excepted.
DANGER!
Risk to life from live voltage (mains voltage)!
There are unprotected live components within the device.
• VDE regulations and national regulations are to be followed.
• Ensure that all lines to be assembled are free of voltage and take
precautions against accidental switching on.
• Do not use the device if it is damaged.
• Take the device or system out of service and secure it against
unintentional use, if it can be assumed, that risk-free operation is no
longer guaranteed.
The device is only to be used for its intended purpose. Any improper modification or
failure to follow the operating instructions voids any and all warranty and guarantee
claims.
After unpacking the device, check it immediately for possible mechanical damage. If it
has been damaged in transport, inform the supplier immediately.
The device may only be used as a fixed-site installation; that means only when assem-
bled and after conclusion of all installation and operational start-up tasks and only in
the surroundings designated for it.
Elsner Elektronik is not liable for any changes in norms and standards which may occur
after publication of these operating instructions.
2.2. Installation location
The device must only be installed and operated in dry, indoor
spaces. Avoid condensation.
The P03i/P04i distributor is designed for series installation on mounting rails and
occupies 6U.

4 Installation and commissioning
P03i/P04i distributor • Version: 15.04.2015 • Technical changes and errors excepted.
2.3. Device/connection design
The connection is made with off-the-shelf UV-resistant telephone cable (A-2Y(L)2Y
2x2x0.6 or A-2Y(L)2Y 2x2x0.8). The weather station and control (or additional P03i dis-
tributors) can be connected disregarding polarity.
The cable connections between weather station and P03i/P04i distributors and be-
tween distributor and controllers should be a maximum of 300 m in length.
2.4. Notes on mounting and commissioning
Device must not be exposed to water (rain). This could result in the electronic being
damaged. A relative air humidity of 95% must not be exceeded. Avoid bedewing.
The L–L and N–N connections in the top and
bottom connection rows are bridged.
Weather station
ControlP03i/P04i
WS1/WS1000
Mains
230 V
Control
WS1/WS1000
Control
WS1/WS1000
Control
WS1/WS1000