Emerson HD2850 User manual

PERSONAL COMPACT DISC PLAYER
with 45 SECOND ANTI-SKIP MEMORY
HD2850
OWNER’S MANUAL
Visit our web site at www.emersonradio.com
HD2850_ib.p65 8/10/01, PM 03:5016

1
Thank you.........
For purchasing this Emerson Personal CD Player. It has a 24 track programmable
memory so you can listen to the songs on your favorite CD's in any order you
choose. Or you can use the Random playback feature and let the player select the
playback order for you. Use the 3-way Repeat feature to repeat a single track, the
entire disc, or a programmed sequence of tracks, indefinitely. We've also included
a 45 Second Electronic Anti-Skip Memory which makes this player virtually skip-
free under normal circumstances.
There's a Dynamic Bass Boost Control that increases and enhances the bass
response, and a set of stereo headphones with their own volume control. The
headphones also fold to a compact size for easy carrying when not in use.
Please read this instruction manual completely and carefully to make sure you
understand the proper operation of this product, and get the maximum enjoyment
out of all the features of this state-of-the-art CD player.
Once again, thanks for purchasing this Emerson product.
The serial number of your CD player can be found on the bottom cabinet. We
suggest that you record the serial number of your unit in the space below for future
reference.
Model Number: HD2850
Serial Number:
HD2850_ib.p65 8/10/01, PM 03:491

2
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This device complies with part 15 of the FCC rules. Operation is subject to the
condition that this device does not cause harmful interference.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
This product contains a low power Laser Device.
• Places exposed to direct sunlight or lose
to heat radiating appliances such as
electric heaters.
Avoid installing the unit in locations described below:
• Dusty places.
• Places subject to constant vibration.
• Humid or moist places.
CAUTION
THIS LASER COMPACT DISC PLAYER FUNCTIONS BY HELP OF INVISIBLE
LASER LIGHT AND IS EQUIPPED WITH SAFETY SWITCHES TO AVOID
EXPOSURE WHEN DOOR IS OPEN AND SAFETY INTERLOCKS ARE
DEFEATED. IT IS DANGEROUS TO DEFEAT OR BYPASS SAFETY SWITCHES.
IMPORTANT NOTES
DANGEROUS VOLTAGE
Uninsulated Dangerous Voltage, that may be of sufficient
magnitude to constitute a risk of electric shock to persons is
present within this product's enclosure.
ATTENTION
The Owner's Manual contains important operating and
maintenance instructions.
For your safety, it is necessary to refer to the manual.
HD2850_ib.p65 8/10/01, PM 03:492

3
1. DBBS (Bass Boost) ON/OFF Switch - Switch On to increase bass response.
2. VOLUME Control – Raises or lowers the volume.
3. PHONES (Headphone) Jack – Connect stereo headphones, included, to this
jack.
4. LINE OUT Jack – To connect this CD player to an external amplifier or
recording device. Connection cable not included.
5. STOP Button – To stop playback, and to turn the power ‘Off’.
6. PROG (Program) Button – To program tracks in the CD memory.
7. LCD Display – Shows track number, playing time, Anti-Skip memory status,
Program, Repeat, Random, and Intro modes.
8. MODE Button – Selects the playback mode: Repeat 1/All, Random, or Intro.
9. DC Input Jack – Connect an AC adapter (not included) to this jack to use 120V
60 Hz house current.
10. ASP (Anti-Skip Protection) Button.
11. PLAY/PAUSE Button – To begin playback, and to pause during playback.
12. CD Door.
13. Battery Compartment (on bottom cabinet).
14. SKIP FWD. Button – To skip tracks or search forward.
15. SKIP REV. Button – To skip tracks or search backward.
16. OPEN Switch – Slide to the right to unlock and open the CD door.
LOCATION OF CONTROLS
12
9
4
1
6
7
13
10
16
3
5
11
8
14
15
HD2850_ib.p65 8/10/01, PM 03:493

4
1. INTRO Indicator – Appears when Intro playback mode is selected.
2. RAND (Random) Indicator – Appears when Random playback mode is selected.
3. PROG (Program) Indicator – Appears when programming tracks or playing
programmed tracks.
4. Track Number Display – Shows the track which is being played, and the total
tracks on the disc.
5. Repeat 1/ALL Indicators – Appears when the Repeat playback mode is selected.
6. ANTI-S (Anti-Skip) Memory Indicator – Bar display indicates the remaining
Anti-Skip memory capacity.
7. Battery Level Indicator – Blinks when batteries need to be replaced.
8. Time Display – Shows elapsed time of the track being played and total playing
time of the disc.
LCD DISPLAY INDICATORS
435
6
87
2
1
HD2850_ib.p65 8/10/01, PM 03:494

5
POWER SOURCE
This CD player can be operated on either 120V 60Hz AC house current with an
optional AC adapter (not included) or on 3V DC (2 "AA" batteries, not included).
BATTERY OPERATION
1. Open the battery compartment door on
the bottom cabinet by sliding it in the
direction of the arrow and then lifting it
open. To prevent loss, the door cannot be
removed from the unit.
2. Insert 2 "AA" batteries (not included) into
the compartment. Use alkaline batteries
for longest life. Follow the polarity
markings inside the compartment. If the
batteries are inserted incorrectly the unit
will not work.
NOTE:
In order to operate the player on batteries the AC adapter must be disconnected
from the DC IN jack.
BATTERY REPLACEMENT
When the batteries become too weak the battery level indicator begins to flash and
operation may become erratic. When this occurs replace the batteries immediately.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or
injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture
(Follow battery manufacturer’s directions.)
HD2850_ib.p65 8/10/01, PM 03:495

6
AC OPERATION (Adapter not included)
Connect the AC adapter to your 120V AC outlet. Then connect the small plug to
the "DC IN 4.5V" jack on the back of the player as shown in the following illustration.
NOTE:
This optional AC adapter, should be rated as follows:
Input: 120V/ 60Hz AC
Output: 4.5V DC
The adapter must have a female-type plug with a positive center:
• Be sure the adapter is UL listed. If you use a “Universal”-type adapter, be sure to
set the output selector to “DC 4.5V”.
• If the AC adapter will not be used for an extended period of time, remove it from
the wall outlet by pulling on the adapter housing. Do not remove the adapter by
pulling on the cord. Do not touch the AC adapter with wet hands.
Positive (+) Negative (–)
HD2850_ib.p65 8/10/01, PM 03:496

7
OPERATING INSTRUCTIONS
NORMAL PLAYBACK
1. Connect the headphones to the PHONES jack.
Set the VOLUME control to a low level before
you begin playback and then adjust the volume
to a comfortable level after playback begins.
2. Slide the CD Door OPEN switch to the right to
release the lock and open the CD Door.
3. Place your disc on the center spindle with the
printed label side facing up. Press down gently near
the center hole to make sure the disc is properly
seated on the spindle.
4. Close the door completely until it locks shut.
5. Press the PLAY/PAUSE button. “45 sec”
followed by “00” appear in the display as the player
reads the disc, then playback begins on Track 1.
The Anti-Skip indicator comes on and the playing
time shows in the display.
6. Adjust the VOLUME and DBBS (Bass Boost)
controls as desired.
NOTE: We have included a second volume
control on the headphone cable. This allows you
to easily adjust the volume if you are carrying the
main unit in a pocket, handbag, backpack etc.
7. When all tracks have been played the player stops
and the display shows the total tracks and playing
time on the disc. After approximately 1 minute the
power shuts off and the display goes blank.
To stop playback before the disc ends press the
STOP button at any time. Press the STOP
button again to shut the power off immediately.
8. Slide the CD Door OPEN switch to the right to
open the door and remove your disc. Close the
CD Door and return your disc to its protective
storage case.
VOL.
ON BASS OFF
To PHONES Jack
HD2850_ib.p65 8/10/01, PM 03:497

8
PAUSE CONTROL
Press the PLAY/PAUSE button during playback to
pause momentarily. The sound stops, the track and
the time display flashes but the disc continues to spin.
Press the PLAY/PAUSE button again to cancel
pause and resume playback. The sound returns and
the display stops flashing.
SKIP/SEARCH CONTROLS
To skip forward or backward to another track during
playback press the SKIP FWD or SKIP REV
buttons repeatedly until the desired track number
appears in the display. Playback will begin on the
desired rack.
To search forward or backward within a track to locate a specific musical passage
press and hold either the SKIP FWD or SKIP REV buttons. The player
moves forward or backward at high speed. When you reach the desired point in the
track, release the buttons and normal playback resumes.
REPEAT PLAYBACK
To repeat a single track:
1. Press PLAY/PAUSE button to begin playback.
2. When playback begins press SKIP FWD or
SKIP REV button to select the desired track.
3. Press the MODE button once until the Repeat 1
“” indicator appears in the display. The
selected track will be repeated indefinitely.
To repeat the entire disc:
1. Press PLAY/PAUSE button to begin playback.
2. When playback begins press the MODE button
twice until the Repeat All “ ” indicator
appears in the display. The entire disc will be
repeated indefinitely.
To cancel repeat playback:
1. Press the STOP button, or;
2. Press the MODE button until no special mode indicators appear in the display.
HD2850_ib.p65 8/10/01, PM 03:498

9
INTRO SCAN
This feature plays only the first 10 seconds of each track on the disc.
1. Press PLAY/PAUSE button to begin playback.
2. When playback begins press the MODE button 3
times.The “INTRO” indicator flashes in the display.
3. Press the STOP button to stop the disc and then
press the PLAY/PAUSE button again. The “INTRO”
indicator stops flashing and remains ‘On’. The player
returns to the beginning of track 1 and plays just the
first 10 seconds of each track on the disc. When the
first 10 seconds of each track has been played, the
player stops.
To cancel Intro Scan press the STOP button or press the MODE button until
none of the special playback mode indicators appear in the display.
RANDOM PLAYBACK
Use Random playback to play all the tracks on a disc in a random order selected
by the CD player.
1. Press PLAY/PAUSE button to begin playback.
2. When playback begins press the MODE button 4
times until the “RAND” indicator flashes in the
display.
3. Press the STOP button to stop the disc and then
press the PLAY/PAUSE button again. The “RAND”
indicator stop flashing and remains on. The player
randomly selects the first track for playback and
continues randomly selecting tracks until every track
on the disc has been played once. After all tracks
have been played the player stops.
To cancel Random playback, press the STOP button, or press the MODE
button until no special mode indicators remain in the display.
HD2850_ib.p65 8/10/01, PM 03:499