Emerson PrPMC800 User manual

Front page
Interior page
The Emerson PrPMC800
series processor PCI
mezzanine card (PMC) is
the ideal solution when
time-to-market and flexibil-
ity are important.
MPC7410 PowerPC®
microprocessor
AltiVec technology
Latest high-performance
PowerPlus III Architecture
2MB/1MB of L2 cache
Up to 512MB on-board
ECC SDRAM
32MB on-board ash
72-bit ECC memory
controller ASIC
Single-wide PMC with a
66/33 MHz PCI interface
Optional 10/100BaseT
Ethernet interface
64-bit PCI host bridge
One asynchronous serial
debug port
Hardware DMA channel
Four 32-bit timers
Two watchdog timers
°
°
°
°
°
°
°
°
°
°
°
°
°
°
The Emerson PrPMC800 series processor PCI mezzanine card (PMC) is the ideal
solution when time-to-market and exibility are important. In addition to the
highlighted features, this PMC module also includes a full-length heatsink, creating
a CPU package capable of handling the thermal requirements of complex tasks.
Processor PMC (PrPMC) modules provide a complete host CPU and memory subsys-
tem to a base board full of PCI-based I/O controllers in a compact, rugged, industry
standard form factor. The PrPMC isolates the complexities of a high-speed CPU, cache
and memory signals from application-specic hardware, enabling OEMs to focus
on their market requirements while simplifying their product release. These modules
also simplify CPU and memory upgrades in performance-driven embedded and
telecom applications.
PrPMC800 Series
High-Performance Processor PMC

Front page
Interior page
2
EIA232
Planar
Base Board
PCI Bus – A32/D64-bit
66/33 MHz
64
10/100 Base T
PMC Interface to
Base Board
Pn4
Pn3
Pn2
Pn1
Ethernet
PCI Bridge and
Memory Controller PowerPC Bus – A32/D64-bit
ECC DRAM
Up to 512MB
Flash
32MB
L2 Cache
2/1MB
MPC7410
processor
COM1
I2C Serial
EEPROM
Specications
PROCESSOR
Microprocessor: MPC7410 class
Clock Frequency: 400 – 500 MHz
On-chip Cache (I/D): 32KB/32KB
L2 Cache: 1MB – 2MB
Cache Bus Clock Frequency: 180 MHz – 225 MHz
MEMORY
ECC Protected Main Memory: PC100 SDRAM
On-board Capacity: Up to 512MB
Single Cycle Accesses: 10 read/5 write
Read Burst Mode: 8-1-1-1 idle; 3-1-1-1 aligned
page hit (CL3)
Write Burst Mode: 4-1-1-1 idle; 3-1-1-1 aligned
page hit
User I2C Serial EEPROM: 8KB
EEPROM/Flash: 32MB surface mount (on-board
programmable), up to 512MB addressable on
carrier (optional)
°
°
°
°
°
°
°
°
°
°
°
°
PrPMC800 Block Diagram
SYNCHRONOUS SERIAL PORT
Controller: 16C550 compatible
Number of Ports: One
Conguration: DTE
Async Baud Rate, b/s max.: 38.4K EIA-232,
115Kb/s raw
IEEE P1386.1 INTERFACE
Address/Data: A32/D32/D64, PMC Pn1, Pn2, Pn3,
Pn4 connectors
PCI Bus Clock: 33 MHz or 66/33 MHz capable
Signaling: 3.3V output; VIO input
Power: +3.3V
Height: 13.5 mm from top of carrier board
(one slot)
Module Type: Single-wide
ETHERNET
Controller: Intel®82559ER/82551IT
PCI Bus Master: 33 MHz with PCI burst
Connector: Models congured for Ethernet routing
via Pn4 do not have a front bezel.
°
°
°
°
°
°
°
°
°
°
°
°
°

Front page
Interior page
3
COUNTERS/TIMERS
Real-Time Timers/Counters: Four 32-bit
programmable
Watchdog Timers: Two, time-out generates
interrupt or reset
MISCELLANEOUS
Reset, Abort and JTAG/COP via on-board debug
connector
Two planar LEDs for Fail and CPU active
POWER REQUIREMENTS
(AltiVec disabled)
+ 3.3V ± 5% @ 20° C
PrPMC8005E-12xx: 3.3 A typical, 3.9 A
maximum
PrPMC8005E-13xx: 4.1 A typical, 4.5 A
maximum
VIO: PCI buffer diode clamping
voltage
DEMONSTRATED MTBF
(based on a sample of eight boards in accelerated
stress environment.)
Mean: 190,509 hours
95% Condence: 107,681 hours
SAFETY
All printed wiring boards (PWBs) are manufactured
with a ammability rating of 94V-0 by UL recognized
manufacturers.
°
°
°
°
°
°
ENVIRONMENTAL
Operating Non-operating
Temperature: 0° C to +55° C,
forced air
cooling
Humidity (NC): 5% to 85% 5% to 95%
Vibration: 1.0 G sine
sweep, 5.0
to 100 Hz, 25
octaves/min
0.5 G sine sweep;
50-500 Hz; 0.1
octaves/min 3.0 G
sine sweep; 5-50 Hz;
0.25 octaves/min
ELECTROMAGNETIC COMPATIBILITY (EMC)
Intended for use in systems meeting the following
regulations:
U.S.: FCC Part 15, Subpart B, Class A (non-residen-
tial)
Canada: ICES-003, Class A (non-residential)
This product was tested in a representative system
to the following standards:
CE Mark per European EMC Directive 89/336/EEC
with Amendments; Emissions: EN55022 Class B;
Immunity: EN50082-1
°
Å
Å
°
Å

Front page
Interior page
Business-Critical Continuity, Emerson Network Power and
the Emerson Network Power logo are trademarks and
service marks of Emerson Electric Co.
©2008 Emerson Electric Co.
www.EmersonNetworkPower.com/EmbeddedComputing
Emerson Network Power.
The global leader in enabling
Business-Critical Continuity™.
Precision Cooling
Services
Site Monitoring
Surge & Signal Protection
AC Power Systems
Connectivity
DC Power Systems
Embedded Computing
Embedded Power
Integrated Cabinet Solutions
Outside Plant
Power Switching & Control
Emerson Network Power
Offices: Tempe, AZ U.S.A. 1 800 759 1107 or [phone] Madison, WI U.S.A. 1 800 356 9602 or [phone]
Shanghai, China [phone] Paris, France [phone] Tokyo, Japan [phone]
Munich, Germany [phone] Hong Kong, China [phone] Tel Aviv, Israel [phone]
PrPMC800-D1 2/08
SOLUTION SERVICES
Emerson Network Power provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed
time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh. Plus solution
extras include enhanced warranty and repairs.
PowerPC is a trademark of IBM Corp. and used under license. Intel is a registered trademark of Intel Corporation or its subsidiaries in the U.S. and other countries. All other product or service names are
the property of their respective owners.
This document identies products, their specications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future
availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should
exercise its own independent judgment to conrm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or
information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit
described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network
Power’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations.
Ordering Information
Part Number Description
33 MHz PCI, Front Ethernet
PRPMC8005E-1261 450 MHz MPC7410, 256MB ECC SDRAM
33 MHz PCI, Rear Ethernet
PRPMC8005E-1259 450 MHz MPC7410, 128MB ECC SDRAM
PRPMC8005E-1269 450 MHz MPC7410, 256MB ECC SDRAM
66 MHz PCI, No Ethernet
PRPMC8005E-2261 450 MHz MPC7410, 256MB ECC SDRAM
PRPMC8005E-2271 450 MHz MPC7410, 512MB ECC SDRAM
Note: Additional PrPMC800 series models may be available; contact your local sales representative.
Documentation
PPMC800A/IH PrPMC800 Installation and Use manual
PPMC800A/PG PrPMC800 Programmer’s Reference Guide