Your packing box should contain the following items:
The XtremeDV-UHD2 - Dual HDMI 2.0 capture card.
Installation DVD-ROM. DOWNLOAD!
(For latest Xtreme Drivers and software go to
www.ems/imaging.com/Downloads.
NOTE:
All plug-in cards are static sensitive and are packed in
antistatic materials. Please keep the card in its
packaging until you are ready to install.
This device complies with part 15 of the FCC Rules.
Locate and double click the setup.exe le.
Click on Install Drivers and follow the installation
Wizard instructions as prompted.
PACKING LIST HARDWARE INSTALLATION SOFTWARE INSTALLATION
We suggest that you regularly visit the EMS web site
for information on updated drivers.
www.ems-imaging.com
It is strongly recommended that you read the detailed
help instructions on completion of the installation. Each
help topic may be printed for ease of use.
You are likely to need a at blade and/or a cross head
screwdriver for the installation of the XtremeDV-UHD2 card;
it would be useful to have these to hand before you begin.
1. Power down the host system and also the input sources
which will be captured on the XtremeDV UHD2 card
2. Remove the host system cover.
3. Locate a vacant PCie slot (x8 or x16) on the
motherboard and remove the corresponding backing
plate.
4. Position the XtremeDV-UHD2 into the selected PCIe
slot and secure the card by screwing the bracket to the
chassis.
5. Connect a HDMI 2.0 rated cables to the input
connectors on the XtremeDV-UHD2.*
6. Connect the HDMI cables to input sources.
7. Power up the host system and then the input sources.
* Note: It is recommended that only authentic cables,
approved and certied by HDMI are used with the
XtremeDV-UHD2 card. When capturing 4k 60p, Premium
Certied cables should be used.
Certied cables have a hologram/QR coded label
attached.
Unzip the EMS downloaded drivers and
