Encore ENLUSB2-5PCI-BR User manual

1. Hardware Installation
To install the USB PCI card, follow this procedure:
1. Make sure the computer is turned off;
2. Gain access to the interior of the PC;
3. Insert the USB PCI card in an empty PCI slot;
4. Press the card gently but firmly into the slot and check to see that all
contacts are fully seated in the connector.;
5. Attach the bracket screws that secure the card to the chassis;
6. Reinstall the covers on the PC.
2. USB Driver Installation
1. Place the Driver CD into the CD-Rom driver. Click the Start button on the
taskbar and click Run. Type “D:\Usb\Usb2.0\VIA\Setup.exe”. (assuming
you have placed the CD in CD-ROM drive labeled as D);
2. Follow any on-screen instructions to complete the software installation;
3. Restart your system;
4. Once you have rebooted the computer, this USB PCI card is ready to be used.
ENLUSB2-5PCI-BR
5-PORTS (4 OUTSIDE + 1 INSIDE) USB 2.0 PCI ADAPTER
User Manual