ENERGEN P8 Original instructions
Power Jumper P8
USER MANUAL AND SAFETY GUIDELINE
®
Intelligent Jump ClampUSB Charging Cable AC Adapter
Product Overview:
Thank you for choosing Energen Power Jumper.
keep this manual for easy reference.
8
1
Function Button
LED Display
Jump Clamp Socket
QC3.0 Output Port
USB 5V/2.4A Output Port
15V/1A Input Port
B. Jump Start Procedure:
1.
2.
3.
4.
5.
Use the Intelligent Jump Clamp provided with the Power Jumper and securely
Securely plug the other end of the intelligent Jump Clamp into the Power
Jumper’s jump clamp socket.
hold for 3 seconds.
8
2
Power On the Power Jumper:
charged or when there are no USB devices connected to the Power Jumper.
the other end of the cord to the Power Jumper input port.
7.
8.
9.
beeping.
Start the vehicle. Do not crank the engine for more than 3 seconds. If the vehicle
Power Jumper’s Jump Clamps socket. Then remove the Jump Clamps from the
materials. Remember to charge the Power Jumper every three months.
8
3
LED
Power jumper is ready to jump start your vehicle.
No Light:
No Light with Beep Sound:
C. Charge Devices through USB Ports:
1. Plug in the USB cable of your device to one of the Power Jumper’s USB ports. If
Jumper will light up and your device will start charging.
8
4
Model Number : EN-PJP8
Weight : 0.95LB / 433g
D. Parts List:
Item
3
4
5
﹟
8
5
H. Warnings
This might be dangerous.
3. Do Not disassemble this product to prevent electric shock.
are connected.
every 3 months.
8
6
Finding Cause
Connect the AC adapter
to the Power Jumper
15V / 1A input port to
reset.
No response when
pressing the FUNCTION
The Power Jumper is not intended for use by children under 18 without adult
supervision.
put in contact with or submerge in water.
Do not open the chassis or disassemble the Power Jumper. Modifying or
contact our technical support for assistance.
8
7
For any please visit us online at www.myenergen.com.
and workmanship for a period of 12 months from the date of purchase by the end
replaced.
2. The warranty does not cover damage or product failure resulted from normal wear
3. Warrant is voided if the security label is broken / removed.
4. We do not assume responsibility for any loss or damage incurred during transit or
as a result of a force majeure.
or misuse of product.
becomes the property of ours.
will be able to provide repair service or replacement with a fee for products that
8
8
®
All content and photography © 2013-2017, Energen. All rights reseved.
Copying or reproduction without permission from Energen are strictly prohibited.
All trademarks are the property of their respective owners.
Designed in USA. Assembled in China.
This manual suits for next models
1
Table of contents
