ENERGY SISTEM Mobile 390 TV Deep Black User manual

2;496@5
User Manual
=<D2?6?054

3
2;496@5
1. INTRODUCTION
To ensure your safety and the safety of others, please ensure that you read all the safety information
before operating this product.
Keep this information in a safe place for future reference.
This symbol indicates that this product incorporates double insulation between hazardous
mains voltage and user accessible parts.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
@NSRaf0\[`VQR_NaV\[`
≥Position the cables so that they cannot be walked on or pinched by items placed on or against
them.
≥Do not use the Mobile 390 TV in humid or damp conditions.
≥Do not allow the Mobile 390 TV to get wet.
≥Do not expose the Mobile 390 TV to dripping or splashing.
≥Do not place water filled objects such as vases on top of the Mobile 390 TV.
≥Do not place naked flame sources, such as candles, on the top of the Mobile 390 TV.
≥To prevent direct exposure to the laser beam, do not open the enclosure.
≥Never stare directly into the laser beam.
Ventilation
The slots and openings on the Mobile 390 TV are for ventilation. Do not cover orblockthemas itmay
cause overheating.
NEVER let children push anything into the holes or slots on the case.
Battery Disposal
Pleaseensure batteries are disposedof safely.
Never dispose of batteries in a fire or with other household waste.
Check with your local authority for disposal regulations.
0YRN[V[T
ALWAYS unplug the product before you clean it.
Do not use liquid or aerosol cleaners.
Clean the Mobile 390 TV with a soft, damp (not wet) cloth.

4
2. CONTROLS AND CONNECTIONS
2.1. PANEL ILLUSTRATION
1. Screen.
2. Stereo speakers.
3. Power ON/OFF indicator.
4. Infrared Sensor to receive the remote control signals.
5. Battery-charge indicator.
1
2 2
34 5

5
2;496@5
6. Disc cover opening button.
7.
Shift right in the menus. Fast Forward.
8.
Shift left in the menus. Fast Rewind.
9.
Move up in the menus.
10.
Move down in the menus.
11. OK: To confirm the selection.
12. SOURCE: Media selection.
13. SETUP: Mobile 390 TV’s setup menu.
14. MENU: Access to the main menu.
15. EXIT: In DVB-T mode, press to exit the current menu.
16.
Play/Pause.Startsof pauses theplayback.
17.
Stop. Stops the playback.
18.
Next track/file.
19.
Previous track/file.
6
78
9
10
11
12
13
14
15
16
17
1819

6
20.On/Off switch.
21. DC IN Power connection (12 V).
22.3.5 mm (1/8”) stereo earphones output.
23.3.5 mm (1/8”) TRRS A/V output.
24. Volume control.
25.USB host port (Type A).
26.ANT in (75 Ohm).
2.2. CONNECTING TO A TV
20
21
22
23242526

7
2;496@5
3. REMOTE CONTROL
3.1. BUTTON DESCRIPTION
1. TFT ON/OFF: Turns on/off the screen.
2. DVB/USB: Switches between DVB and
USBmode.
3. NUMERIC KEYBOARD.
4. GOTO: Go to a specific time index.
5. STOP: Press to stop playback.
6. PLAY/PAUSE:Press tostart/pause/
resume the playback.
7. TV/RADIO: Switches between TV
channelsand radio channels.
8. NAVIGATIONBUTTONS.
9. ZOOM/EPG: Press to zoom in. Press to
show EPG info.
10. EXIT: In DVB-T mode, press to exit the
current menu.
11. NEXT: Go to next chapter/track/file.
12. PREV: Go to previous chapter/track/file.
13. TITLE:Pressto accessDVDtitlemenu.
14. MUTE: Press to mute/unmute the sound.
15. INFO: Shows detailed information about
thecurrent file, discor program.
16. MENU:Access mainmenu.
17. SUBTITLE: Press to change between
subtitles(ifavailable).
18. AUDIO: Press to change the audio mode
(ifavailable).
19. REPEAT/FAV: Press to switch between
different repeat modes. Press to show the
favorite channelslist.
20.RECALL: Press to return to the last
channeltuned.
21. SETUP: Access the setup menu.
22. ENTER: To confirm a selection. To open the TV/Radio channels list.
23. SOURCE:Switchesbetween DVD/USB/DVB-Tmode.
24. REV: Fast rewind.
25. FWD: Fast forward.
26. RANDOM/ADD: Press to randomize the playback mode Press to add a channel to the favorite channels list.
27. PROG/DEL: Press to access program mode. Press to remove a channel from the favorite channels list.
28. ANGLE: Press to change the angle mark (if available).
ZOOM/EPG

8
3.2. BATTERY
Pull the battery loader out and insert a CR2025 battery.
2
1
Make sure to place the battery in the correct direction.
When not using the remote control for a long time remove the
battery.
When operating range reduces replace the battery.
4. MP3/WMA/MPEG4
You can play files stored in optical discs (CD/DVD) or USB devices. To select the desired media press
the SOURCE button and use up/down to highlight DVD or USB.
Press Direction key to choose the root directory and then press ENTER button to enter into the
subdirectory.
Press Direction keys to choose the desired track and then press ENTER or PLAY to start the music or
movie playback.
If you want to return to the upper menu, press Direction key to choose the folder named ‘...’ and press
ENTERbutton.
≥Filter: Allows selecting the categories of files (Audio, Photo and Video) displayed in the browser
list.
≥Repeat: To switch different repeat playing mode.
≥Mode: Select different playing mode.
Normal: Shuffle mode is cancelled.
Shuffle: Shuffle mode enabled. When playback reaches the end of the current chapter/track,
playback jumps to a random chapter/track. As the end of each chapter/track is reached, another
random chapter/track will be played until all tracks/chapters have been played or the Shuffle
mode is cancelled by toggling to a different Mode Option.
Music Intro: In this mode, the media will play 10 seconds then skip to next media.
Edit Mode: To enable programmed playback mode. When you select the mode, press LEFT
Direction key to directory and press ENTER to choose the desired track and press Add to program
to start program playback.

9
2;496@5
5. PICTURES
The operation of the image viewer is similar to the music/video viewer.
Image rotation: Use the direction keys to rotate the picture. Press ANGLE button to change the
picture scan mode.
6. SYSTEM SETUP
Press the SETUP button on the remote control, the SETUP MENU(main)will be displayed.
After accessing the setup menu, press the direction buttons for up and down movement to select an
item desired, then press the ENTER button to confirm.
Press LEFT direction button return to the menu of upper level.
To exit the setup, press the SETUP button again.
6.1. LANGUAGE
≥Use this item to select the language of the setup menu and screen display.
≥Subtitle.Thisoptionprovides the presetsubtitlelanguage.Followtheoperatinginstructions
stated in DVD MENU SETUP In combination with the desired option.
≥MPEG4 Subtitle: Choice different MPEG4 subtitleencoding option.
≥Audio: Follow the operating instructions stated in DVD MENU SETUP In Combination with the
desired option. This option provides the built-in disc dubbing language options.
≥DVD Menu: This option provides the film s menu language options. Follow the operating
instructions stated in DVD MENU SETUP in combination with the desired option.
6.2. VIDEO
≥Aspect Ratio: 4:3PS, 4:3LB, 16:9
≥TV System: NTSC, PAL
≥Smart picture. Adjust display effect for video output:
Standard:defaulteffect.
Bright: internal setting for bright view effect.
Soft: internal setting for soft view effect.
Dynamic: user adjust brightness, contrast, colour, etc.

6.3. RATING
≥ParentalControl
Selecting a Rating allows the user to set the parental control feature of the player Select Parental
Control, and press ENTER to change the different mode.
Note: Unlock the password before setting Parental Control.
≥SetPassword
Use the 0-9 keys to input four digits(password), then press ENTER to confirm.
Note: If you forget your password, please use the universal password 6666 to unlock.
6.4. MISC SETUP
≥Use Default Settings
Reset setup data to factory defaults.
7. DVB-T
To access DVB-T function, press SOURCE button from the remote control to choose DVB-T mode.
7.1. FIRST TIME INSTALLATION
If you are using the receiver for the first time, a First Time Installation menu will be displayed to
guide you through the initial setup. Use the remote control to finish the setup.
≥OSD Language: Select the language for the user interface.
≥Area: Select the country of residence.
≥Time Zone: Adjust the time zone parameters. Select the appropriate time zone to display the local
timecorrectly.
≥FTA Default Setting: If you want to reset your regional settings and clear all the stored channels,
select FTA Default Setting and confirm to reset it.
Once the Setup parameters have been properly configured, press ENTER to start the automatic
channel search. Please wait until the scanning is completed. In case you want to stop the
scanning process, press EXIT button. The channels already found will be stored.
When finished, all the active channels found will be stored automatically. The last found channel
will be showed.
10

11
2;496@5
7.2. DVB-T MAIN MENU
To access the DVB-T Main Menu, press the SETUP or MENU buttons from the remote control.
The DVB-T main setup menu appears in the screen. Use direction buttons to navigate through the
DVB-T Menu options. The selected choice will be highlighted.
7.2.1. Auto Search:
Choose the automatic search options. The operation of the Auto Search is the same as the
explained in First Time Installation. For more details refer it.
7.2.2. Manual Search:
If any channel is missing after auto search, or you want to add recently launched channels, you
can use Manual Search to scan the desired channels. To manually search the target channel, you
must specify its parameters (Frequency and Bandwidth). Select ENTER button to start the manual
search. After the channel is found, it is saved and appended to the current channel list. If no signal
isfound,a messageindicating“nosignal”willappear.
7.2.3. System Setup
This menu will allow you to adjust the setup options:
≥OSD Language: Use it to change the language for the user interface.
≥Area: Choose the country of residence.
≥Time Zone: Adjust the time zone parameters. Select the appropriate time zone to display the local
timecorrectly.
≥FTA Default Setting: If you want to reset your regional settings and clear all the stored channels,
select FTA Default Setting and confirm to reset it.
7.3. FAVORITE FUNCTION
In DVB-T mode, press ENTER button. The system will show the channels list. Then select from the
list the channel you want to make favorite and press RANDOM/ADD button to add the channel to
the favorite channels list. If you want to remove the channel from the favorite channels list, press
PROG/DEL button. You can find the favorite channels list by pressing REPEAT/FAV button.

12
8. TROUBLESHOOTING
If you experience problems with this receiver or its installation, in the first instance please read
carefully the relevant sections of this User Manual and this Troubleshooting section.
Problem Possible cause Solution
There is no picture or no
sound
Improper connection with AC
adapter orcar adapter
Check the connection
Low battery Connect the power supply
Use of unauthorized power
supply
Yourdevice maybe damaged.
Use only the power supply
provided with de device
Power switch is on OFF
position.
Turn the switch to ON position
There is no sound If you can hear nothing
through the speakers, maybe
the earphone is plugged in
Unplug the earphone
The sound is muted Use the volume control to
unmutethesound
Dark picture Brightness and contrast are
not properly adjusted
Adjust Brightness, Contrast
correctly
The remote control is not
working
Battery exhausted Charge battery
Remotecontrolisincorrectly
aimed
Aim the remote control to the
device. Check that nothing
blocks the front panel
Doesn’tdisplaythe subtitle Theprogramsignals no
subtitledate
Try pressing the SUB button
toopenthe subtitle
Thesubtitledoesn’topenor
signal istoo weak
Make sure the signal is good

13
2;496@5
Problem Possible cause Solution
The LED does not light up
/ not lit when the device is
connected to the mains
Mains cable is not connected Check that the mains cable is
plugged into the power socket
Can’t play the music file
correctly OR can’t play the
video
The file is damaged or the
code is wrong
Change the file
The format of the video is not compatible, or the file is damaged
When the device tries to find
and store channels you get the
message“Nosignal”
OR
When only very few of the
expected number of channels
are found
The aerial is not properly
connected to the machine
Check the aerial installation,
including its connections
The aerial is not correctly di-
rected towardsthe transmitter
Check that the aerial is direc-
tedtowards thetransmitter
The aerial is not suitable for
digital channels
Checkthat digital transmis-
sions are availablein your area
There are no terrestrial digital transmissions in your area

14
9. SPECIFICATIONS
General
TV System PAL / NTSC
Supported discformats DVD, VCD, CD, CD-R, CD-RW, DVD+-R/W
Supported file formats MP3, JPEG, MPEG4
Video
S/N Ratio >= 65 dB
Resolution >=500 lines
Audio
Frequency 20 Hz - 20 kHz +/- 1 dBI
S/N ratio >= 90 dB
Dynamic Range >= 80 dB
Distortion < 0.01 %
D/A Converter 96 KHz / 24 bit
Output
Screen technology TFT-LCD Color
Screen size 9“
Video output 1 Vp-p (75 Ohms)
Audiooutput 2CH
Power supply DC 12 V
Power consumption <= 12 W
Size 238 x 170 x 41 mm
Weight 1.0 Kg
DVB-T Tuner
Input Frequency VHF 177.5MHz~226.5MHz
UHF 474 MHz~858 Mhz
Specifications are subject to change without further notice.

15
2;496@5
10. WARRANTY
Energy Sistem Soyntec S.A. warrants its products to be free from defects in materials and workman-
ship at the time of purchase.
The warranty period is 36 months from the date of purchase.
11. WARRANTY PROCEDURE
≥Visit the Support section at http://support.energysistem.com and select your product to view the
FAQ (Frequently Asked Questions). The solution to your problem is very likely to have been already
published there. You will also be able to download user manuals, user guides, drivers and updates.
≥If you cannot find an appropriate solution in the Support section, you may send us your enquiry or
warranty service request by email: [e-mail]
≥Alternatively, you may prefer to contact the distributor from which you purchased the product,
presenting the purchase receipt or invoice.
Specifications are subject to change without notice.
© 2011 by Energy Sistem®. All rights reserved.
Trademarks:
All company, brand andproduct names are trademarks or registered trademarks of their respective
companies.
12. DECLARATION OF CONFORMITY
:N[bSNPab_R_;NZR' Energy Sistem Soyntec S. A.
Address:Pol. Ind. Finestrat – C/ Calpe, 1 – 03509 Finestrat Alicante
Tel: [phone]
Fax: [phone]
;63' A53107488
We declare under our own exclusive responsibility that the product:
Energy Sistem® Portable DVD/DVB-T Player Energy™ Mobile 390 TV Deep Black
is in compliance with the essential directives, norms and standards of the European Union 89/336/
EEC (EMC Directive).
:N[bSNPab_V[TP\b[a_f' China