EnGenius EDS6115 User manual

Basic Connection (without PoE)
1Connecting to Camera
AB
A) Connect the camera to a switch via Ethernet Cable.
B) Connect the supplied power cable from the camera to the power outlet.
EnViewer Finder is the setup wizard assisting you to congure the
camera connected to your network (LAN).
Note: If you do not have DHCP server connected, the camera will change
IP address to 192.168.1.200 automatically 3 minutes after booting up.
2Setup EnViewer Finder and Wi-Fi
The wizard will search all cameras within your home network (LAN).
A) Run the CD on your computer and follow the EnViewer Finder setup
instructions.
(PC-based Wizard for Local Network)
E) The wizard will guide you to complete the camera settings step by step.
F) Click “Finish” to close this utility. Double click the camera in the
Camera List for video live view streaming.
Set up Wi-Fi : Click on the Scan to search the Wi-Fi nearby.
Select the target Wi-Fi, click “Save”,
then enter the Wi-Fi password.
Continue with the process by clicking “Next” to complete the Wi-Fi setup
Cloud Service: You can enable the DDNS Service and create your own
personal Domain name in the DDNS alias eld for remote accessing or
sharing with others later on.
Cong : Set up the Video Resolution, Compression Codec, and Maximum
Frame Rate.
Note: Once you have nished the process, your device is now connected
to Wi-Fi. Please remove the Ethernet Cable for Wi-Fi usage.
Network: Set up IP Address, System Time, Wi-Fi, and Administrator
settings including change of password for the camera.
Note: You can select DHCP mode for default setting, or select Manual
mode to assign a xed IP Address for the camera.
B) Select the target camera from the list.
C) Enter the Username and Password of the camera . The default value of
both username and password is admin.
D) Click on to log in.
admin
admin
Next >
Power over Ethernet (PoE) Connection
Option 1) When connecting to PoE-Enabled Switch:
This is a PoE compliant camera. You can connect the Ethernet Cable from
the camera to a PoE-enabled Switch.
EDS6115
RJ-45 Ethernet Cable Quick Start Guide
Power Adapter
CD with User Manual
and Software
Package Contents
Interface
1
2
IR LEDs
Built-in LENs
Built-in MIC
Micro SDHC Slot / Reset button
RJ-45 (PoE)
DC Jack (12V/1A)
3 in 1 button : WPS,
Reboot, Reset to
Default
3
4
MinimumRequirements
Quick Start Guide
Screws / Plastic Anchors
3
1
2
6
5
7
Before Getting Started
Internet SwitchGateway / Router
For Remote Network
Mobile Viewer (APP)
EnViewer
EnGenius Cloud Services (Web)
EnViewer
Video Management Software
EnGenius VMS
For Local Network
PC-based Wizard
EnViewer Finder
Please ensure your Gateway/Router
has Internet connection to proceed
with the camera setup.
PoE-Enabled Switch
non-PoE Switch
PoE injector
Technical Support
Country of Purchase Service Center Service Information
North America
www.engeniuscanada.com Canada
[email protected]
TollFree: ([phone]
Local: ([phone]
www.engeniustech.com Los Angeles, USA [email protected]
Toll Free: ([phone]
Local: ([phone]
Central & South America
es.engeniustech.com
pg.engeniustech.com
Miami, USA [email protected]
Miami: ([phone]
Sao Paulo, Brazil: ([phone]
D.F, Mexico: ([phone]
Europe
www.engeniusnetworks.eu
Netherlands [email protected]
([phone]
Africa
CIS
Middle East
Russia
www.engenius-me.com
Dubai, UAE [email protected]
Toll Free:
U.A.E.: 800-EnGenius
800-364-364-87
General: ([phone]
Asia
Oceania
www.engeniustech.com.sg
Singapore www.engeniustech.com.sg/e_warranty_form
[email protected]
Toll Free:
Singapore: 1800 364 3648
Others
www.engeniusnetworks.com
Taiwan, R.O.C [email protected]
Quick Start Guide
1 Megapixel Wi-Fi HD Dome Camera
EnGenius Cloud Services
(EnViewer Finder / EnViewer)
version l.0
EDS6115
In the United States of America, use of video or audio equipment for recording the image of a person without
their knowledge and consent is prohibited in certain states, commonwealths, municipalities or jurisdictions.
The enduser assumes all liability for compliance with applicable state, local and federal laws. End-users in other
countries assume all liability for compliance in their country. Product features,specications, or industrial design
of the camera product are subject to change without notice, and actual product appearance may dier from
what is depicted on product packaging, on websites, or in marketing material. EnGenius Technologies, Inc. is
not responsible or liable for any property loss or damage in any site or deployment where EnGenius camera
products are used. Apple, the Apple logo, iPadand iPhone are trademarks of Apple Inc., registered in the U.S. and
other countries. App Store is a service mark of Apple Inc. Android and Google Play are trademarks of Google Inc.
Trademarks and registered trademarksare the proper ty of their respective owners.For United States of America:
Copyright ©2015 EnGenius Technologies, Inc. All rights reserved.
Notes
Ceiling Mount Hooks
Option 2) When connecting to a non-PoE Switch:
Connect the camera to a non-PoE Switch via PoE Injector (optional).
4
EDS6115 EDS6115
EDS6115 EDS6115
EDS6115

A) Select and run the VMS from the CD. Continue with the installation
process.
C) Go to Conguration and select camera to obtain the camera setting
panel.
F) Select one of the IP cameras that is available and click OK.
H) Repeat Step D) to G) until all desired cameras are added. You can now
monitor all cameras in live view.
D) Go to Camera tab, and click Add on the top right side of the Camera
page.
E) Click on Discovery to detect IP cameras under local area network (LAN).
G) Enter the camera username & password and click Get Camera Set-
tings to verify. Then click Save to add the camera and exit.
B) Run EnGenius VMS to execute live monitor.
EnGenius VMS is a free bundle Video Management Software can sup-
port multiple cameras.
(the PC-based VMS, work with EnGenius IP Camera only)
Option I - Scan QR Code Option II - Auto Search
A) Scan the QR Code with the provided
label.
B) Click “ Yes” to add the device in the Camera List.
B) All cameras within the local network will be listed. Select the device(s)
you would like to add and click on Save.
A) Click on Auto Search.
1Get Started
2Setup Camera
3Live View
Download EnViewer
Scan below QR code or download “EnViewer by EnGenius” APP from
your mobile device.
Follow the EnViewer Wizard instruction,
you will have two options to add camera.
This option is recommended if you want to add multiple cameras within
your local network at the same time.
Simply select the desired camera to access video live view.
EnViewerTM APP Setup
EnViewer by EnGenius
Google Play
for Android™Devices
App Store
for iPhone®and iPad®
or
Option I Option II
4Mounting the Camera 5Setup EnGenius VMS
A) Locate an area on the ceiling or wall. Make sure the area is capable of
supporting the weight of camera.
B) Use the ceiling mount bracket screw slots to drill the mounting screws
into the ceiling or wall.
C) Place the ceiling mount bracket on the camera and route the cable on
the side of conduit entry tunnel. Twist the camera counterclockwise until
it clicks into place.
D) For installing the camera on the ceiling light grid steel
frame, screw in the hooks on both side into the ceiling
mount bracket. Secure the bracket on the steel ceiling
frame then twist in the
camera rmly.
3Access Live View
Please enter default username (admin) and password (admin) to access
live view.
Note: You will be asked to download the WebCMS plug-in either for the
rst attempt or an updated version available.
You should now see the Live View streaming successfully.
admin
ooooooo
EDS6115
ooooooo
AA:BB:CC:DD:EE:FF
How to run VMS and add camera(s)
The default value of username and password is admin.
admin
admin
EDS6115-Outdoor
EDS6115-Living Room
EDS6115-Outdoor
EDS6115-Lobby
EDS6115-Living Room
EDS6115-Outdoor
EDS6115-Lobby
EDS6115-Outdoor
EDS6115-Living Room
EDS6115-Outdoor
EDS6115-Lobby
EDS6115 EDS6115
EDS6115 EDS6115 1-MegapixelDay/Night Dome Type Network Camera
EDS6115
EDS6115
EDS6115
Find the EnViewer QR Code Label inside
the box that is specically for your
camera and other advanced setting
information.
Prior to the usage of EnGenius Cloud
Service, please ensure the following
actions have been completed.
A) Camera device DDNS has been enabled.
Note: From the Web Management Page: Network > EnGenius Cloud
Service
B) Camera device UPnP and UPnP Traversal are both enabled.
C) Network protocol UPnP (Universal Plug and Play) Traversal
function has been enabled from your Internet Administrator or ISP
(Internet Service Provider).
EDS6115-E7FA
EDS6115-Outdoor
EDS6115-Lobby
EDS6115-Living Room
EDS6115-E7FA
EDS6115-E7FA