EnGenius ESR-9752 User manual

Quick Start Guide – ESR-9752 Wireless Broadband Router. 1
ESR-9752 Wireless Broadband Router
Quick Start Guide
------------------------------------------------------------------------------------------------------------------------------------------------
Connect the supplied power-adapter to the power inlet port and connect it to a wall outlet. Then, the router
automatically enters the self-test phase. During self-test phase, Power LED will blink briefly, and then will be
lit continuously to indicate that this product is in normal operation.
CHECK
A standard CD-ROM drive
Internet connection should be setup & ready to use (ADSL or cable modem).
Modem must provide RJ45 port to connect with ESR-9752.
Microsoft Windows compatible PC/Notebook with UPnP enabled network adapter
CAT 5 network cable(s), RJ45 port on PC/Notebook.
STEP 1
Connect ESR-9752 WAN port & your modem WAN port with RJ45 cable.
STEP 2
Power up ESR-9752.POWER led on front panel lights up & remains stable.
STEP 3
Connect ESR-9752 LAN port & PC/Notebook RJ45 port with network cable.
STEP 4
Insert Wizard CD into your CD-ROM drive and browse it with Windows Explorer.
Click on “Wizard.exe” to activate SMART WIZARD.
Step 5
Click on [Setup Wizard] and follow the instruction given on the screen to complete the initial device
configuration.
Step 6
Click Next to Proceed with the wizard on the connection of the router.

Quick Start Guide – ESR-9752 Wireless Broadband Router. 2
Step 7
Click ‘Next” to start connection
Step 8
Click “ Next’ to proceed to next step
Step 9
Click ‘Next’ to proceed
Step 10
Click ‘Next’ to proceed

Quick Start Guide – ESR-9752 Wireless Broadband Router. 3
Step 11
Click ‘Next’ to proceed
Step 12
Enter User Name and password ‘admin’
Step 13
Click ‘Next’ to proceed with Installation.
Step 14
Select ‘AP Router Mode’ and click ‘Next’

Quick Start Guide – ESR-9752 Wireless Broadband Router. 4
Step 15
Select ‘DHCP’ and click ‘Next’
Step 16
**For M1 and Starhub users Click ‘Clone MAC Address’ and ‘Next’
* For Singnet users just Click ‘Next’
Step 17
Enter Desired SSID to be broadcast, this will be the WiFi name for the user to connect to the router wirelessly.
Click ‘Next’ after this step had been done to proceed.
Step 18
Click ‘Reboot’ for the router to initialize the configuration.

Quick Start Guide – ESR-9752 Wireless Broadband Router. 5
Step 19
Check WAN connection status to check connection between modem and router
Step 20
Setup WiFi Security
Click on ‘Wireless’ to check/amend SSID to desired. Next Click on ‘Security’ to define WiFi encryption.
Step 21
Click on ‘Encryption’ to select desired type of encryption for the router WiFi and input encryption key and Click
‘Apply’
Note
Once setup is completed, power off modem and router. Power up the modem and router at the
same time and wait for both the modem and router to completely initialize.