EnGenius ESR-9850 User manual

Quick Start Guide – ESR9850 Wireless Broadband Router.
ESR9850 Wireless 11N Gigabit AP
Router
Quick Start Guide
Prerequisites:
A standard CD-ROM drive
ADSL / Cable Modem with RJ45 port.
PC or Notebook with Ethernet network interface.
Standard Web Browser
CAT 5 network cable(s), RJ45 port on PC/Notebook.
STEP 1
Power up ESR9850. Please wait until WLAN starts
blinking.
STEP 2
Insert Wizard CD into your CD-ROM drive.
The Wizard should start in a few seconds. If Wizard
does not start automatically, please browse the CD
and Click on “index.html” to activate SMART
WIZARD.

Quick Start Guide – ESR9850 Wireless Broadband Router.
Step 3
Click on ‘Quick Wizard’ to start installation
Please click on [Quick Setup] and follow the instructions
given to complete the device initiation configuration.
Step 4
Click ‘Next’ to continue the steps on connection

Quick Start Guide – ESR9850 Wireless Broadband Router.
Step 5
Click ‘Next’ to continue
Step 6
Click ‘Next’ to continue

Quick Start Guide – ESR9850 Wireless Broadband Router.
Step 7
Click ‘Next’ to Continue
Step 8
Enter User Name and Password ‘admin’

Quick Start Guide – ESR9850 Wireless Broadband Router.
Step 9
Click ‘Next’ to proceed
Step 10
Select ‘AP Router Mode’ and click ‘Next’

Quick Start Guide – ESR9850 Wireless Broadband Router.
Step 11
Unit will reboot
Step 12
Select ‘DHCP’ when connection from modem that is running
DHCP server and click ‘Next’

Quick Start Guide – ESR9850 Wireless Broadband Router.
Step 13
If MAC cloning is necessary click on ‘Clone MAC Address’ if
not just click ‘Next’
Step 14
Set 11b/g SSID and select bar to select type of encryption.
Click ‘Next’ to continue

Quick Start Guide – ESR9850 Wireless Broadband Router.
Step 15
Click ‘Reboot’ to allow system to apply setting and restart
Step 16
Once unit restart check status by scrolling the side bar