EnGenius ESR-1221 EXT User manual

Quick Start Guide – ESR-1221EXT Wireless Broadband Router. 1
ESR-1221Ext Wireless Broadband Router
Quick Start Guide
------------------------------------------------------------------------------------------------------------------------------------------------
Connect the supplied power-adapter to the power inlet port and connect it to a wall outlet. Then, the router
automatically enters the self-test phase. During self-test phase, Power LED will blink briefly, and then will be
lit continuously to indicate that this product is in normal operation.
CHECK
A standard CD-ROM drive
Internet connection should be setup & ready to use (ADSL or cable modem).
Modem must provide RJ45 port to connect with ESR-1221Ext.
Microsoft Windows compatible PC/Notebook with UPnP enabled network adapter
CAT 5 network cable(s), RJ45 port on PC/Notebook.
STEP 1
Connect ESR-1221Ext WAN port & your modem WAN port with RJ45 cable.
STEP 2
Power up ESR-1221Ext.POWER led on front panel lights up & remains stable.
STEP 3
Connect ESR-1221Ext LAN port & PC/Notebook RJ45 port with network cable.
STEP 4
Insert Wizard CD into your CD-ROM drive and browse it with Windows Explorer.
Click on “Wizard.exe” to activate SMART WIZARD.
Step 5
Click on [Setup Wizard] and follow the instruction given on the screen to complete the initial device
configuration.
Step 6
Click Next to Proceed with the wizard on the connection of the router.

Quick Start Guide – ESR-1221EXT Wireless Broadband Router. 2
Step 7
Click ‘Next” to start connection
Step 8
Click “ Next’ to proceed to next step
Step 9
Click ‘Next’ to proceed
Step 9
Click ‘Next’ to proceed

Quick Start Guide – ESR-1221EXT Wireless Broadband Router. 3
Step 11
Click ‘Next’ to proceed
Step 12
Once the Internet Explorer Start, Enter ‘192.168.1.1’.
Enter User Name and password ‘admin’ to access Web GUI.
Step 13
Click ‘TCP/IP Settings’ to set WAN preference.
Step 14
Select ‘WAN Interface’ and Select ‘DHCP Client’ on WAN Access Type.
**For M1 and Starhub users Click ‘Clone MAC Address’ and ‘Apply Changes’
* For Singnet users just Click ‘Apply Changes’ for system to take effect.

Quick Start Guide – ESR-1221EXT Wireless Broadband Router. 4
Step 15
Select ‘LAN Interface’ and make sure ‘Server’ is selected at DHCP.
Step 16
Click ‘Wireless’ and select ‘Basic Settings’ to change SSID to desired identity and Click ‘Apply Changes’ to
take effect.
Step 17
Setup WiFi Security
Click on ‘Wireless’ and Click on ‘Security’ to defineWiFi encryption. Next Click on ‘Apply Changes’ to take
effect.
Note
Once setup is completed, power off modem and router. Power up the modem and router at the same
time and wait for both the modem and router to completely initialize.