Enhance Mobility Hercules User manual

15410 CR 565A, Suite C Groveland, FL 34736 www.enhancemobility.com 1-800-296-4151
Enhance your Life!
1) Here is a photo of the lift in its most
compact and travel/storage ready
position.
Instructions for using the Hercules Scooter Lift
The Hercules Scooter lift is designed to be used with the Solax Mobie Plus and Transformer
mobility scooters. This portable lift allows you to pick up and move around the scooter so
that you can place it in a vehicle for easy transport. The lift also collapses down to a
manageable size for easy storage and transport.
Unfolding the Hercules Lift
2) Lower the front legs down until the red wheels are touching the ground and the
brackets lock into place.

15410 CR 565A, Suite C Groveland, FL 34736 www.enhancemobility.com 1-800-296-4151
Enhance your Life!
3) Make sure the hinge (located in red
circle on the photo to the left) is locked
before moving to the next step.
4) Lift the motor into position as
shown in the photo to the left.

15410 CR 565A, Suite C Groveland, FL 34736 www.enhancemobility.com 1-800-296-4151
Enhance your Life!
6) Attach the power cord to the charging port on your Scooter.
5) Raise the telescoping poles,
place your foot on the black bar
between the two anti-tip wheels
(as shown in the photo to the
left). Then lift up on the handle
(as also shown in the photo to the
left). Raise to the desired height.
7) Attach the other end of the
power cord to the port on the
Hercules Lift Motor (as shown in
the red circle in the photo to the
left).

15410 CR 565A, Suite C Groveland, FL 34736 www.enhancemobility.com 1-800-296-4151
Enhance your Life!
9) Wrap the belt around the metal bar in between the tiller and the seat. Secure the belt by
clipping the belt into the metal loop. The loop should be above the black plastic circle on the
red belt. See photos below.
8) Lower the belt to desired length
by pressing the dual switch on the
motor of the scooter lift down
towards the ground (as shown in
the photo to the left in the red
circle).

15410 CR 565A, Suite C Groveland, FL 34736 www.enhancemobility.com 1-800-296-4151
Enhance your Life!
10) To raise the scooter off the ground, make sure the brake is engaged and push up on the
dual switch located on the motor of the scooter lift. See Photo below
11) Once you have it raised to desired height, unlock the brake and move the lift and scooter
to the desired location. Lock the brake on the lift
12) Place the scooter into the vehicle and push down on the dual switch located on the motor
of the lift.
13) Remove the belt from around the scooter.
14) Raise the belt back to its storage position by pushing up on the dual switch located on the
motor of the lift.
15) Lower the telescoping poles of the scooter lift by pressing the red thumb grips together.
16) Fold the motor backwards to its storage position.
17) Return the front wheels to their storing position by lifting on the black lock on the leg
brackets.