ENHANCED VISION USB Bridge User manual

Quick Start Guide
BEFORE YOU BEGIN:
• Thisguideisdesignedasasupplementtothecompleteuser’s
manualfortheUSBbridge,locatedontheincludedCD-ROM
• Installingthisdevicemayrequirethatyouhaveadministratorprivi-
legesonyourPC.
• Itishighlyrecommendedthatyouinstalltheincludedsoftwarebe-
foremakingthehardwareconnectionstoyourPC.
• DonotconnecttheincludedUSBcableorthehardwareinterfaceto
yourPCuntilafterthesoftwareinstallationhascompleted.Failureto
followtheseinstructionsmaycauseyourPCto“freeze”orcausethe
USBBridgeandsoftwaretoincorrectlyfunction.
• Shouldyouneedassistanceinstallingtheincludedsoftware,please
seektheassistanceofatrainedcomputerspecialistorcontactour
technicalsupportdepartment:
[phone] (US Ofce, toll-free)
[phone] (outside the US)
[email protected]

2
3
Software InStallatIon
Figure1
Figure2
Figure3
Figure4
Figure5
Figure6
1. Start up your PC as normal. Load
the included CD-ROM containing the
Viewer Application software and USB
drivers into the CD-ROM drive of
your PC as shown (SeeFigure1).
2. The installation should start
automatically. If not, you may need
to browse and double-click on the
“ViewerSetup.exe” le contained on
the CD-ROM (SeeFigure2).
3. Please close any unused Windows
applications during the installation.
Once the Setup Wizard appears on
screen, click on the “Next” button
to continue the installation process
(SeeFigure3).
4. After reading the License Agreement
appearing the on screen, click on
the “I Agree” button to continue the
installation process (SeeFigure4).
5. A different install location may be
chosen if desired. For now, click on
the “Install” button to continue the
installation using the default folder
(SeeFigure5).
6. Once the installation has fully com-
pleted, click on the “Finish” button
(SeeFigure6).
Software inStalation

2
3
Hardware InStallatIon
Figure8
Figure7
Figure9
Figure10
Figure11
Figure12
7. If you are setting up the USB Bridge
for the rst time, please insert the
lithium battery into the charger base
of the USB Bridge so that it can fully
charge(SeeFigure7)
8. Connect the camera output cable of
your compatible Enhanced Vision
product to the “CAMERA” input port
on the rear of the USB Bridge.
(SeeFigure8)
9. Connect one end of the included
USB cable to the “USB” port on the
rear of the USB Bridge.
 (SeeFigure9)
10. Connect the remaining end of the
included USB cable to an available
high-speed USB 2.0 port on the
front, side or rear of your PC.
(SeeFigure10)
11. Connect the tip of the included power
supply to the “DC 12V” input port on
the rear of the USB Bridge.
 (SeeFigure11)
12. Plug in the remaining end of the
power supply to an available
AC/mains outlet (SeeFigure12).
Hardware inStalation

www.enhancedvision.com
[phone](USOfce,toll-free)
[phone](UKOfce)
Part # MAN-0851-00
January, 2010
Copyright © 2008 by Enhanced Vision. All rights reserved.
Product specications subject to change without prior notice.
13. Press the POWER button on the
front of the USB Bridge. When
the power is turned on, the green
“POWER” indicator will illuminate
(SeeFigure13).
14. Start the viewer application by
double-clicking on the “EV” icon,
located on your Windows desktop
 (SeeFigure14).
15. Momentarily, the camera image
should appear on your PC screen
(SeeFigure15).
Figure13
Figure14
Figure15
For detailed operating instructions of your USB Bridge and
its functions, please consult the electronic version of the
owner’s manual, located on the included CD-ROM
USing tHe USb bridge