Enterasys X-PEDITION E9.1.7.0 How to use

CUSTOMER RELEASE NOTES
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 1 of 31
F0615-J
50 Minuteman Rd.
Andover, MA 01810
USA
Tel: [phone]
X-Pedition Router
System Firmware Version E9.1.7.0
System Firmware Release Date: September 2003
INTRODUCTION:
This document provides specific information relevant to version E9.1.7.0 of the System Firmware for the X-Pedition
family of products. It includes content from the E9.0.7.7 System Firmware Maintenance Release and the E9.1.3.0A
patch release.
Enterasys Networks recommends that these Release Notes be thoroughly reviewed prior to the
installation or upgrade of this product.
GLOBAL SUPPORT:
Enterasys Networks Global Technical Assistance Center
By Phone: [phone]
By Email: [email protected]
By Web: http://www.enterasys.com/support
By Fax: [phone]
By Mail: Enterasys Networks, Inc.
35 Industrial Way
P.O. Box 5005
Rochester, NH 03866-5005
For information regarding the latest firmware available, recent releases note revisions, or if you require additional
assistance, please visit the Enterasys Networks Support web site.

SYSTEM FIRMWARE SPECIFICATION
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 2 of 31
F0615-J
SYSTEM FIRMWARE SPECIFICATION:
Before installing the E9.1.7.0 System Firmware, the Boot Firmware should be upgraded to at least version
E3.2.0.0.
Refer to the E3.2.0.0 Boot Firmware Release Notes, or any X-Pedition Getting Started Guide, for
instructions on upgrading the Boot Firmware.
System Firmware File Name Version No. Release Date
xp9170 E9.1.7.0 September 2003
xp9078 E9.0.7.8 September 2003
xp9080 E9.0.8.0 July 2003
xp9077 E9.0.7.7 July 2003
xp9076 E9.0.7.6 June 2003
xp9075 E9.0.7.5 May 2003
xp9074 E9.0.7.4 March 2003
xp9130 E9.1.3.0 March 2003
xp9073 E9.0.7.3 February 2003
xp9120 E9.1.2.0 January 2003
xp9072 E9.0.7.2 January 2003
xp9100 E9.1.0.0 December 2002
xp9071 E9.0.7.1 December 2002
xp9070 E9.0.7.0 November 2002
xp9060a E9.0.6.0A October 2002
xp9050 E9.0.5.0 August 2002
xp9040 E9.0.4.0 July 2002
xp9030 E9.0.3.0 June 2002
xp9020 E9.0.2.0 April 2002
xp9010 E9.0.1.0 March 2002
xp9000 E9.0.0.0 December 2001
xp8300 E8.3.0.0 October 2001
xp8210 E8.2.1.0 September 2001
xp8200 E8.2.0.0 June 2001
ssr8100 E8.1.0.0 February 2001
ssr8010 E8.0.1.0 October 2000
ssr8000 E8.0.0.0 September 2000
ssr3200 3.2.0.0 May 2000
ssr3100 3.1.0.0 April 2000
ssr3010 3.0.1.0 March 2000
ssr3000 3.0.0.0 October 1999
ssr2220 2.2.2.0 September 1999
ssr2200 2.2.0.0 April 1999
ssr2100 2.1.0.0 December 1998
ssr2000 2.0.0.0 November 1998
ssr1200 1.2.0.0 September 1998
ssr1100 1.1.0.0 August 1998
ssr1010 1.0.1.0 June 1998
ssr1000 1.0.0.0 April 1998

RELEASE NAMING CONVENTION
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 3 of 31
F0615-J
RELEASE NAMING CONVENTION:
Normally, the X-Pedition product family supports two active release lines. The older line is always in maintenance
only mode and receives only maintenance improvements—the newer line receives maintenance improvements
and introduces new features. For a brief time, however, the X-Pedition will support a special third line—E9.0.8.
This line introduces the Security Attack Monitor (SAM) feature on the E9.0 code base. E9.0.8 is a maintenance
only line with end of maintenance scheduled for December 2003.
The new E9.0.8 line does not alter the maintenance only characteristics of the E9.0.7.X releases as no new
features including SAM will be introduced in this line. SAM will be incorporated into the normal development line
in release E9.1.8.0.
E9.0 is the maintenance only line to which only bug fixes are provided. E9.1 is the development line that receives
new features and bug fixes. The figure below illustrates the relationships between these lines. Support for E9.0 as
the maintenance only line and E9.1 as the development line will be extended briefly beyond that shown below to
permit the release of E9.1.8.0.
EOD or “end of development” signifies the point at which no new features will be added to the release line. EOM
or “end of maintenance” signifies the point where bug fixes are no longer applied to the line.
The naming convention is as follows.
E<R1>.<R2>.<D>.<M>
Where:
R1 – Release line digit 1
R2 – Release line digit 2
D – A release during the development period
M – A release during the maintenance-only period
Maintenance Only
Development
Development
Maintenance Only
Maintenance Only
E9.0
Except
E9.0.8
E9.1
E9.2
September
2003
December
2002
June
2004
March
2005
E9.0.8
Maintenance Only
August
2003 December
2003

RELEASE NAMING CONVENTION
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 4 of 31
F0615-J
A release line is defined by the first two digits in the name, e.g. E9.0 and E9.1. The third digit increments with
each release during the development phase of a line. For example, E9.0.7.0 is the seventh development release
for the E9.0 line. The fourth digit is incremented with each release during the maintenance-only period of a
release line. Thus E9.0.7.4 is the fourth maintenance-only release for the E9.0 line.
Should a bug fix be required between regularly scheduled releases, a patch release is provided. Patch releases
are designated with a trailing letter. For example, E9.0.6.0B is the second patch to the sixth development release
of the E9.0 line. E9.0.7.2A is the first patch to the second maintenance-only release of the E9.0 line.

HARDWARE / FIRMWARE COMPATIBILITY
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 5 of 31
F0615-J
HARDWARE / BOOT FIRMWARE/ SYSTEM FIRMWARE COMPATIBILITY:
The Minimum Boot Firmware Version is a function of:
•The hardware installed in the system (as listed below).
•The version of VFS used. For more information on VFS versions see the “PCMCIA Card VFS Version” sub-
section in the “INSTALLATION AND CONFIGURATION NOTES” section of the X-Pedition Boot Firmware
Release Notes.
•The need for new features or corrections that are provided in a specific version.
The issue of determining minimum Boot Firmware version can be avoided by installing version E3.2.0.0 (or later)
of the Boot Firmware.
NOTE: In some cases, the Minimum System Firmware Version depends upon the revision of a particular model
number. The revision number appears on the serial number sticker attached to the front of all Enterasys Networks
hardware assemblies. These numbers are interpreted as follows:
AAAA XXXX XXXX XXRR
Two Letter Assembly Revision Number
Four Digit “940” Assembly Number
Example:
3570 0000 0000 000A
This number is broken down as follows:
•Assembly number 9403570 (In this case, the SSR-POS21-04)
•The assembly has a revision number of “0A”
For the two SSR-PCMCIA part numbers listed below, sub-part numbers (e.g., 35-028-02) are also listed. Find the
sub-part number on the SSR-PCMCIA card. Match it with a sub-part number to aid in determining the minimum
System Firmware and Boot Firmware versions.
For detailed information on managing the Boot Firmware, please refer to version E3.2.0.0 (or later) of the
X-Pedition Boot Firmware Release Notes.

HARDWARE / FIRMWARE COMPATIBILITY
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 6 of 31
F0615-J
This version of System Firmware supports the X-Pedition Router hardware listed in the following table:
Part Description
Minimum
System
Firmware
Version
Minimum
Boot
Firmware
Version
5SSRM-02 Router module for the Matrix E5 E8.0.1.0 1.1.0.8
6SSRLC-FX-AA 8-port 100BASE-FX (MT-RJ) module for 5SSRM-02 and 6SSRM-02 3.0.50.11
6SSRLC-LX-AA 2-port 1000BASE-LX module for 5SSRM-02 and 6SSRM-02 3.0.50.11
6SSRLC-LX70-AA 1-port 1000BASE-LX 70 KM module for 5SSRM-02 and 6SSRM-02 3.0.50.11
6SSRLC-SER-AA 2-port Serial module (No compression or encryption) for 5SSRM-02 and 6SSRM-02 3.0.50.11
6SSRLC-SERC-AA 4-port Serial module with compression (No encryption) for 5SSRM-02 and 6SSRM-02 3.0.50.11
6SSRLC-SERCE-AA 4-port Serial module with compression & encryption for 5SSRM-02 and 6SSRM-02 3.0.50.11
6SSRLC-SX-AA 2-port 1000BASE-SX module for 5SSRM-02 and 6SSRM-02 3.0.50.11
6SSRLC-TX-AA 8-port 1000BASE-TX module for 5SSRM-02 and 6SSRM-02 3.0.50.11
6SSRM-02 Router module for the Matrix E6 (SS6000) and Matrix E7 3.0.50.11 1.1.0.8
ER16-04 4-port 1000BASE GBIC module [T-Series] for ER16 E8.0.0.0
ER16-08 8-port 1000BASE GBIC module [T-Series] for ER16 E8.0.0.0
ER16-AC AC Power Supply for ER16 E8.0.0.0
ER16-ATM29-02 2-port ATM OC-3c base module [T-Series] for ER16 E8.3.0.0
ER16-CK Clock module for ER16 E8.0.0.0
ER16-CM3-128 Control Module 3 (291 MHz CPU) with 128MB for ER16 E8.0.0.0 E3.0.0.0
ER16-CM4-256 Control Module 4 (380 MHz CPU) with 256MB for ER16 E8.2.0.0 E3.1.0.0
ER16-CS X-Pedition ER16 Chassis with 16 slots. Includes ER16-CK, ER16-FN, and ER16-SF E8.0.0.0
ER16-DC DC Power Supply for ER16 E8.0.0.0
ER16-FDDI-02 2-port FDDI base module [T-Series] for ER16 E8.3.0.1
ER16-FN Fan Tray module for ER16 E8.0.0.0
ER16-GTX32-04 4-port 1000BASE-TX module for ER16 E9.0.0.0
ER16-GTX32-08 8-port 1000BASE-TX module for ER16 E9.0.0.0
ER16-HFX31-24 24-port 100BASE-FX module [T-Series] for ER16 (MMF) E8.3.0.0
ER16-HFX39-24 24-port 100BASE-FX module [T-Series] for ER16 (SMF) E8.3.0.0
ER16-HSSI-02-CK 2-port HSSI module for ER16 with external clocking E8.3.0.0
ER16-OS16-01 1-port 10-Gigabit Ethernet module for ER16 (1 slot configuration) E9.1.7.0 E3.2.0.0
ER16-OS26-01 1-port 10-Gigabit Ethernet module for ER16 (2 slot configuration) E9.1.0.0 E3.2.0.0
ER16-POS-21-04 4-port OC-3/STM-1 Packet over SONET/SDH MMF module [T-Series] ER16 E9.0.3.0
ER16-POS-29-04 4-port OC-3/STM-1 Packet over SONET/SDH SMF module [T-Series] for ER16 E9.0.3.0
ER16-POS-31-02 2-port OC-12/STM-4 Packet over SONET/SDH MMF module [T-Series] for ER16 E9.0.3.0
ER16-POS-39-02 2-port OC-12/STM-4 Packet over SONET/SDH SMF module [T-Series] for ER16 E9.0.3.0
ER16-SERC-04-AA 4-port Serial module with compression for X-Pedition ER16 E8.3.0.0
ER16-SERCE-04-A 4-port Serial module with compression and encryption for X-Pedition ER16 E8.3.0.0
ER16-SF Switching Fabric module for ER16 E8.0.0.0
ER16-SX-08 8-port 1000BASE-SX module [T-Series] for ER16 E8.0.0.0
ER16-TX-24 24-port 10/100BASE-TX module [T-Series] for ER16 E8.0.0.0
ER16-TX-32 32-port 10/100BASE-TX module [T-Series] for ER16 E8.0.0.0
SSR-16 X-Pedition 8600 Chassis with 16 slots. Comes with SSR-FAN-16 and SSR-SF-16. 1.2.0.0
SSR-2-B128 X-Pedition 2000 Chassis with 16-ports 10/100 TX ,128 MB memory, and 2 open slots 3.1.0.0 1.1.0.9
SSR-2-FX 8-port 100BASEFX (MT-RJ) module for X-Pedition 2000 2.1.0.1
SSR-2-FX-AA 8-port 100BASEFX (MT-RJ) module for X-Pedition 2000 3.0.0.0
SSR-2-GSX X-Pedition 2100 Chassis with 8-ports 1000BASE-SX and 64MB Memory 2.2.0.1 1.1.0.5
SSR-2-HSSI-AA 2-port HSSI module for X-Pedition 2000 E8.0.0.0
SSR-2-LX 2-port 1000BASE-LX module for X-Pedition 2000 1.2.0.0
SSR-2-LX-AA 2-port 1000BASE-LX module for X-Pedition 2000 3.0.0.0

HARDWARE / FIRMWARE COMPATIBILITY
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 7 of 31
F0615-J
Part Description
Minimum
System
Firmware
Version
Minimum
Boot
Firmware
Version
SSR-2-LX70 1-port 70 km 1000BASE-LX module for X-Pedition 2000 2.0.0.0
SSR-2-LX70-AA 1-port 70 km 1000BASE-LX module for X-Pedition 2000 3.0.0.0
SSR-2-SER 2-port Serial module (No compression or encryption) for X-Pedition 2000 2.1.0.0
SSR-2-SER-AA 2-port Serial module (No compression or encryption) for X-Pedition 2000 3.0.0.0
SSR-2-SERC 4-port Serial module with compression (No encryption) for X-Pedition 2000 2.1.0.0
SSR-2-SERC-AA 4-port Serial module with compression (No encryption) for X-Pedition 2000 3.0.0.0
SSR-2-SERCE 4-port Serial module with compression and encryption for X-Pedition 2000 2.1.0.0
SSR-2-SERCE-AA 4-port Serial module with compression and encryption for X-Pedition 2000 3.0.0.0
SSR-2-SX 2-port 1000BASE-SX module for X-Pedition 2000 1.2.0.0
SSR-2-SX-AA 2-port 1000BASE-SX module for X-Pedition 2000 3.0.0.0
SSR-2-TX 8-port 10/100 TX module for X-Pedition 2000 1.2.0.0
SSR-2-TX-AA 8-port 10/100 TX module for X-Pedition 2000 3.0.0.0
SSR-8 X-Pedition 8000 Chassis with 8 slots. Comes with SSR-FAN-8. 1.0.0.0
SSR-ARE Advanced Routing Engine (currently supports AppleTalk) for X-Pedition 8000/8600 E8.1.0.0
SSR-ATM29-02 2-port ATM OC-3c base module [T-Series] for X-Pedition 8000/8600 3.1.0.0
SSR-CM2-128 Control Module 2 (198 MHz CPU) with 128 MB memory for X-Pedition 8000/8600 1.1.0.0 1.1.0.2
SSR-CM2-64 Control Module 2 (198 MHz CPU) with 64 MB memory for X-Pedition 8000/8600 1.1.0.0 1.1.0.2
SSR-CM2B-64 Control Module 2 (198 MHz CPU) with 64 MB memory for X-Pedition 8000/8600 E9.0.0.0 E3.2.0.0
SSR-CM3-128 Control Module 3 (291 MHz CPU) with 128MB memory for X-Pedition 8000/8600 E8.0.0.0 E3.0.0.0
SSR-CM4-256 Control Module 4 (375/380 Mhz CPU) with 256MB memory for X-Pedition 8000/8600 E8.2.0.0 E3.1.0.0
SSR-FAN-16 Fan Tray module for X-Pedition 8600 1.0.0.0
SSR-FAN-8 Fan Tray module for X-Pedition 8000 1.0.0.0
SSR-FDDI-02 2-port FDDI base module [T-Series] for X-Pedition 8000/8600 3.2.0.0
SSR-GLH39-02 2-port 1000 LLX / LH module (SCLX for SMF) [T-Series] for X-Pedition 8000/8600 3.1.0.0
SSR-GLX19-02 2-port 1000 LX module (SCLX for MMF or SMF) with 4 MB for X-Pedition 8000/8600 1.0.0.0
SSR-GLX29-02 2-port 1000 LX module (SCLX for MMF or SMF) with 16 MB for X-Pedition 8000/8600 1.0.0.0
SSR-GLX29-02-AA 2-port 1000 LX module (SCLX for MMF or SMF) with 16 MB for X-Pedition 8000/8600 3.0.0.0
SSR-GLX39-02 2-port 1000 LX module (SCLX for MMF or SMF) [T-Series] for X-Pedition 8000/8600 3.1.0.0
SSR-GLX39-04 4-port 1000 LX module (SCLX for MMF or SMF) [T-Series] for X-Pedition 8000/8600 E8.3.0.0
SSR-GLX70-01 1-port 70 Km 1000BASE-LX module with 16 MB for X-Pedition 8000/8600 2.0.0.0
SSR-GLX70-01-AA 1-port 70 Km 1000BASE-LX module with 16 MB for X-Pedition 8000/8600 3.0.0.0
SSR-GSX11-02 2-port 1000 SX module (SCSX for MMF Only) with 4 MB for X-Pedition 8000/8600 1.0.0.0
SSR-GSX21-02 2-port 1000 SX module (SCSX for MMF Only) with 16 MB for X-Pedition 8000/8600 1.0.0.0
SSR-GSX21-02-AA 2-port 1000 SX module (SCSX for MMF Only) with 16 MB for X-Pedition 8000/8600 3.0.0.0
SSR-GSX31-02 2-port 1000 SX module (SCSX for MMF Only) [T-Series] for X-Pedition 8000/8600 3.1.0.0
SSR-GSX31-04 4-port 1000 SX module (SCSX for MMF Only) [T-Series] for X-Pedition 8000/8600 E8.3.0.0
SSR-GTX32-02 2-port 1000 TX module (Cat 5 RJ-45) [T-Series] for X-Pedition 8000/8600 3.1.0.0
SSR-GTX32-04 4-port 1000 TX module (Cat 5 RJ-45) [T-Series] for X-Pedition 8000/8600 E9.0.0.0
SSR-HFX11-08 8-port 100 FX module (MMF SC) with 4 MB for X-Pedition 8000/8600 1.0.0.0
SSR-HFX21-08 8-port 100BASE-FX module (MMF SC) with 16 MB for X-Pedition 8000/8600 1.0.0.0
SSR-HFX21-08-AA 8-port 100BASE-FX module (MMF SC) with 16 MB for X-Pedition 8000/8600 3.0.0.0
SSR-HFX29-08 8-port 100BASE-FX SMF module with 16 MB for X-Pedition 8000/8600 2.0.0.0
SSR-HFX29-08-AA 8-port 100BASE-FX SMF module with 16 MB for X-Pedition 8000/8600 2.0.0.0
SSR-HSSI-02 2-port HSSI module for X-Pedition 8000/8600 2.1.0.0
SSR-HSSI-02-AA 2-port HSSI module for X-Pedition 8000/8600 3.0.0.0
SSR-HSSI-02-CK 2-port HSSI module for X-Pedition 8000/8600 with external clocking E8.3.0.0
SSR-HTX12-08 8-port 10/100 TX module (Cat 5 RJ-45) with 4 MB for X-Pedition 8000/8600 1.0.0.0
SSR-HTX12-08-AA 8-port 10/100 TX module (Cat 5 RJ-45) with 4 MB for X-Pedition 8000/8600 3.0.0.0
SSR-HTX22-08 8-port 10/100 TX module (Cat 5 RJ-45) with 16 MB for X-Pedition 8000/8600 1.0.1.0
SSR-HTX22-08-AA 8-port 10/100 TX module (Cat 5 RJ-45) with 16 MB for X-Pedition 8000/8600 3.0.0.0

HARDWARE / FIRMWARE COMPATIBILITY
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 8 of 31
F0615-J
Part Description
Minimum
System
Firmware
Version
Minimum
Boot
Firmware
Version
SSR-HTX32-16 16-port 10/100 TX module (Cat 5 RJ-45) with 16 MB [T-Series] for X-Pedition
8000/8600
3.1.0.0
SSR-MEM-128 128MB Memory Upgrade Kit for SSR-CM2-64, SSR-CM2-128, SSR-CM3-128, and
ER16-CM3-128
1.1.0.0 1.1.0.2
SSR-MEM-256 256MB ECC Memory Upgrade Kit for SSR-CM4-256 and ER16-CM4-256 E9.0.7.4 or
E9.1.3.0
E3.3.0.0
SSR-PCMCIA
35-028-01
35-053-01
35-053-02
35-053-03
37-002-01
8MB PCMCIA card for SSR-CM2-64, SSR-CM2-128, SSR-CM3-128, SSR-CM4-256,
ER16-CM3-128, and ER16-CM4-256
1.0.0.0 1.0.0.0
SSR-PCMCIA
35-028-02
35-053-04
37-010-01
8MB PCMCIA card for SSR-CM2-64, SSR-CM2-128, SSR-CM3-128, SSR-CM4-256,
ER16-CM3-128, and ER16-CM4-256
3.0.1.6,
3.0.1.7,
3.1.0.8
and up
excluding
3.2.0.0
E3.0.0.0
SSR-POS21-04 4-port OC-3/STM-1 Packet over SONET/SDH MMF module [T-Series] for X-Pedition
8000/8600
3.1.0.0
SSR-POS21-04
Assy 3570 Rev0A+
4-port OC-3/STM-1 Packet over SONET/SDH MMF module [T-Series] for X-Pedition
8000/8600
E9.0.0.1
SSR-POS29-04 4-port OC-3/STM-1 Packet over SONET/SDH SMF module [T-Series] for X-Pedition
8000/8600
3.1.0.0
SSR-POS29-04
Assy 3569 Rev0A+
4-port OC-3/STM-1 Packet over SONET/SDH SMF module [T-Series] for X-Pedition
8000/8600
E9.0.0.1
SSR-POS31-02 2-port OC-12/STM-4 Packet over SONET/SDH MMF module [T-Series] for X-Pedition
8000/8600
3.1.0.0
SSR-POS31-02
Assy 3568 Rev0A+
2-port OC-12/STM-4 Packet over SONET/SDH MMF module [T-Series] for X-Pedition
8000/8600
E9.0.0.1
SSR-POS39-02 2-port OC-12/STM-4 Packet over SONET/SDH SMF module [T-Series] for X-Pedition
8000/8600
3.1.0.0
SSR-POS39-02
Assy 3567 Rev0A+
2-port OC-12/STM-4 Packet over SONET/SDH SMF module [T-Series] for X-Pedition
8000/8600
E9.0.0.1
SSR-PS-16 AC Power Supply module for X-Pedition 8600 1.0.0.0
SSR-PS-16-DC DC Power Supply module for X-Pedition 8600 1.0.0.0
SSR-PS-8 AC Power Supply module for X-Pedition 8000 1.0.0.0
SSR-PS-8-DC DC Power Supply module for X-Pedition 8000 1.0.0.0
SSR-SERC-04 4-port Serial module with compression for X-Pedition 8000/8600 2.1.0.0
SSR-SERC-04-AA 4-port Serial module with compression for X-Pedition 8000/8600 3.0.0.0
SSR-SERCE-04 4-port Serial module with compression and encryption for X-Pedition 8000/8600 2.1.0.0
SSR-SERCE-04-AA 4-port Serial module with compression and encryption for X-Pedition 8000/8600 3.0.0.0
SSR-SF-16 Switching Fabric module for X-Pedition 8600 1.2.0.0
XP-2100 X-Pedition 2100 Chassis with 8-ports 1000BASE-SX, 64MB Memory E9.0.1.0 E3.2.0.0
XP-2400 X-Pedition 2400 Chassis with 16-ports 10/100 TX, 128MB expandable memory, and 2
card slots.
E9.0.0.0 E3.2.0.0
XP-2400-256 X-Pedition 2400 Chassis with 16-ports 10/100 TX, 256MB memory, and 2 card slots. E9.0.0.0 E3.2.0.0
XP-2400-DC X-Pedition 2400 Chassis with 16-ports 10/100 TX, 128MB expandable memory, and 2
card slots; DC-powered
E9.0.0.0 E3.2.0.0
XP-2-ATM29-02 2-port ATM OC-3c base module [T-Series] for X-Pedition 2400 E9.0.0.0
XP-2-FX-AA 8-port 100BASEFX (MT-RJ) module for X-Pedition 2400 E9.0.0.0
XP-2-HSSI-CK 2-port HSSI module for X-Pedition 2400 E9.0.0.0
XP-2-LX-AA 2-port 1000BASE-LX module for X-Pedition 2400 E9.0.0.0

HARDWARE / FIRMWARE COMPATIBILITY
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 9 of 31
F0615-J
Part Description
Minimum
System
Firmware
Version
Minimum
Boot
Firmware
Version
XP-2-LX70-AA 1-port 70 km 1000BASE-LX module for X-Pedition 2400 E9.0.0.0
XP-2-SER-AA 2-port Serial module (No compression or encryption) for X-Pedition 2400 E9.0.0.0
XP-2-SERC-AA 4-port Serial module with compression (No encryption) for X-Pedition 2400 E9.0.0.0
XP-2-SERCE-AA 4-port Serial module with compression and encryption for X-Pedition 2400 E9.0.0.0
XP-2-SX-AA 2-port 1000BASE-SX module for X-Pedition 2400 E9.0.0.0
XP-2-TX-AA 8-port 10/100 TX module for X-Pedition 2400 E9.0.0.0
XP-PCMCIA-16AT 16MB ATA PCMCIA card for SSR-CM2-64, SSR-CM2-128, SSR-CM3-128, SSR-
CM4-256, ER16-CM3-128, and ER16-CM4-256
E8.2.0.0 E3.1.0.0
XP-PCMCIA-32AT 32MB ATA PCMCIA card for SSR-CM2-64, SSR-CM2-128, SSR-CM3-128, SSR-
CM4-256, ER16-CM3-128, and ER16-CM4-256
E8.2.0.0 E3.1.0.0
XP-PCMCIA-16LN 16MB PCMCIA card for SSR-CM2-64, SSR-CM2-128, SSR-CM3-128, SSR-CM4-
256, ER16-CM3-128, and ER16-CM4-256
3.0.1.6,
3.0.1.7,
3.1.0.8
and up,
excluding
3.2.0.0
E3.0.0.0
The following table lists hardware not supported in this System Firmware release. The last System Firmware
release to support this hardware was series 3.0.X.X.
Part Description
SSR-2-B SSR2000 with 32 MB
SSR-2-B-AA SSR2000 with 32 MB
SSR-CM-128 Control Module 1 with 128 MB memory for SSR8000 and SSR8600
SSR-CM-64 Control Module 1 with 64 MB memory for SSR8000 and SSR8600

HARDWARE / FIRMWARE COMPATIBILITY
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 10 of 31
F0615-J
The following table lists supported hardware that is System Firmware and Boot Firmware version independent.
Part Description
APHY-21 SSR-ATM29-02 1 port OC-3 MMF Physical Interface Module
APHY-22 SSR-ATM29-02 1 port OC-3 UTP Physical Interface Module
APHY-29IR SSR-ATM29-02 1 port OC-3 SMF-IR Physical Interface Module
APHY-67 SSR-ATM29-02 1 port DS-3/T3 Physical Interface Module (Coax)
APHY-77 SSR-ATM29-02 1 port E-3 Physical Interface Module (Coax)
APHY-82 SSR-ATM29-02 1 port T-1 Physical Interface Module (UTP)
APHY-92 SSR-ATM29-02 1 port E-1 Physical Interface Module (UTP)
FPHY-01 SSR-FDDI-02 MMF DAS/SAS with SC connectors
FPHY-02 SSR-FDDI-02 UTP SAS with RJ-45 connector
FPHY-09 SSR-FDDI-02 SMF DAS/SAS with SC connectors
XP-APHY-21 ER16-ATM29-02/XP-2-ATM29-02 1 port OC-3 MMF Physical Interface Module
XP-APHY-22 ER16-ATM29-02/XP-2-ATM29-02 1 port OC-3 UTP Physical Interface Module
XP-APHY-29IR ER16-ATM29-02/XP-2-ATM29-02 1 port OC-3 SMF-IR Physical Interface Module
XP-APHY-67 ER16-ATM29-02/XP-2-ATM29-02 1 port DS-3/T3 Physical Interface Module (Coax)
XP-APHY-77 ER16-ATM29-02/XP-2-ATM29-02 1 port E-3 Physical Interface Module (Coax)
XP-APHY-82V ER16-ATM29-02/XP-2-ATM29-02 1 port T-1 Physical Interface Module (UTP) with
over current/voltage protection.
XP-APHY-92V ER16-ATM29-02/XP-2-ATM29-02 1 port E-1 Physical Interface Module (UTP) with
over current/voltage protection.
XP-FPHY-01 ER16-FDDI-02 MMF DAS/SAS with SC connectors
XP-FPHY-02 ER16-FDDI-02 UTP SAS with RJ-45 connector
XP-FPHY-09 ER16-FDDI-02 SMF DAS/SAS with SC connectors
GPIM-01 ER16 Gigabit Ethernet Physical Interface Module, 1000BASESX
GPIM-08 ER16 Gigabit Ethernet Physical Interface Module, Long Haul (70Km)
GPIM-09 ER16 Gigabit Ethernet Physical Interface Module, 1000BASELX
SSR-2-RACKMOUNT Rack Mount Kit for X-Pedition 2000 and X-Pedition 2100
SSR-449DTE-02 4 meter 2 lead cable with 2 male RS449 DTE (male) connectors
SSR-530DTE-02 4 meter 2 lead cable with 2 male RS530 (male) connectors
SSR-HSSI-CAB 3 meter HSSI cable, male to male connector
SSR-V35-DTE-02 4 meter 2 lead cable with 2 male V35 DTE (male) connectors
SSR-X21DTE-02 4 meter 2 lead cable and 2 make X21 DTE (male) connectors

HARDWARE REQUIREMENTS
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 11 of 31
F0615-J
HARDWARE REQUIREMENTS TABLE:
NOTE: X-Pedition line card hardware makes use of three basic ASIC versions (pre AA-series, AA-series and T-
series). The features supported by each line card are roughly defined by which series of ASIC hardware
is used on that card.
The following table shows the hardware supporting specific features in this release:
Pre
AA AA – Series T – Series
X-Pedition
Feature Set /
Part Number
Description
Weighted Fair Queuing Network Address Translation Server Load Balancin
g
Per Flow Rate Limitin
g
Flow Aggregate Rate Limitin
g
Per Protocol VLAN Established Bit ACL TOS Rewrite Layer 4 Bridging Multiple IPX Enca
p
sulation
Per Port Rate Limiting Aggregate Rate Limiting Jumbo Frame Support Weighted Fair Queuing Weighted Random Early Detection
802.1Q Multicast Port Re
p
lication
5SSRM-02
5SSRM-02 Router Module for the Matrix E5 X X X X X X X X X X
6SSRM-02
6SSRM-02 Router Module for the Matrix E6 &
E7 X X X X X X X X X X
5SSRM-02 /
6SSRM-02
6SSRLC-FX-AA 8-port 100BASE-FX (MT-RJ) X X X X X X X X X X
6SSRLC-LX-AA 2-port 1000BASE-LX X X X X X X X X X X
6SSRLC-LX70-AA 1-port 1000BASE-LX 70 KM X X X X X X X X X X
6SSRLC-SER-AA 2-port Serial X X X X X X X X X X
6SSRLC-SERC-AA 4-port Serial, compression X X X X X X X X X X
6SSRLC-SERCE-AA 4-port Serial, compression &
encryption X X X X X X X X X X
6SSRLC-SX-AA 2-port 1000BASE-SX X X X X X X X X X X
6SSRLC-TX-AA 8-port 10/100BASE-TX X X X X X X X X X X
XP 2000
SSR-2-B128 X-Pedition 2000 X X X X X X X X X X
SSR-2-FX 8-port 100BASEFX X
SSR-2-FX-AA 8-port 100BASEFX X X X X X X X X X X
SSR-2-HSSI-AA 2-port HSSI X X X X X X X X X X
SSR-2-LX 2-port 1000BASE-LX
SSR-2-LX-AA 2-port 1000BASE-LX X X X X X X X X X
SSR-2-LX70 1-port 70 km 1000BASE-LX
SSR-2-LX70-AA 1-port 70 km 1000BASE-LX X X X X X X X X X
SSR-2-SER 2-port Serial X
SSR-2-SER-AA 2-port Serial X X X X X X X X X X
SSR-2-SERC 4-port Serial, compression X
SSR-2-SERC-AA 4-port Serial, compression X X X X X X X X X X
SSR-2-SERCE 4-port Serial, compression &
encryption X
SSR-2-SERCE-AA 4-port Serial, compression &
encryption X X X X X X X X X X
SSR-2-SX 2-port 1000BASE-SX
SSR-2-SX-AA 2-port 1000BASE-SX X X X X X X X X X
SSR-2-TX 8-port 10/100 TX X
SSR-2-TX-AA 8-port 10/100 TX X X X X X X X X X X
XP 2100
SSR-2-GSX (AA) X-Pedition 2100 X X X X X X X X X
XP-2100 X-Pedition 2100 X X X X X X X X X

HARDWARE REQUIREMENTS
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 12 of 31
F0615-J
Pre
AA AA – Series T – Series
X-Pedition
Feature Set /
Part Number
Description
Weighted Fair Queuing Network Address Translation Server Load Balancin
g
Per Flow Rate Limitin
g
Flow Aggregate Rate Limitin
g
Per Protocol VLAN Established Bit ACL TOS Rewrite Layer 4 Bridging Multiple IPX Enca
p
sulation
Per Port Rate Limiting Aggregate Rate Limiting Jumbo Frame Support Weighted Fair Queuing Weighted Random Early Detection
802.1Q Multicast Port Re
p
lication
XP 2400
XP-2400 X-Pedition 2400 X X X X X X X X X X
XP-2-ATM29-02 2-port ATM OC-3 X X X X X X X X X X X X X X X
XP-2-FX-AA 8-port 100BASEFX X X X X X X X X X X
XP-2-HSSI-AA 2-port HSSI X X X X X X X X X X
XP-2-LX-AA 2-port 1000BASE-LX X X X X X X X X X
XP-2-LX70-AA 1-port 70 km 1000BASE-LX X X X X X X X X X
XP-2-SER-AA 2-port Serial X X X X X X X X X X
XP-2-SERC-AA 4-port Serial, compression X X X X X X X X X X
XP-2-SERCE-AA 4-port Serial, compression &
encryption X X X X X X X X X X
XP-2-SX-AA 2-port 1000BASE-SX X X X X X X X X X
XP-2-TX-AA 8-port 10/100 TX X X X X X X X X X X
XP 8000 / 8600
SSR-ARE Advanced Routing Engine
SSR-ATM29-02 2-port ATM OC-3 X X X X X X X X X X X X X X X
SSR-FDDI-02 2-port FDDI X X X X X X X X X X X 1 X X X
SSR-GLH39-02 2-port 1000 LLX/LH X X X X X X X X X X X X X X X
SSR-GLX19-02 2-port 1000 LX – 4 MB
SSR-GLX29-02 2-port 1000 LX – 16 MB
SSR-GLX29-02-AA 2-port 1000 LX – 16 MB X X X X X X X X X
SSR-GLX39-02 2-port 1000 LX X X X X X X X X X X X X X X X
SSR-GLX39-04 4-port 1000 LX X X X X X X X X X X X X X X X
SSR-GLX70-01 1-port 70 km 1000BASE-LX
SSR-GLX70-01-AA 1-port 70 km 1000BASE-LX X X X X X X X X X
SSR-GSX11-02 2-port 1000 SX – 4 MB
SSR-GSX21-02 2-port 1000 SX – 16 MB
SSR-GSX21-02-AA 2-port 1000 SX – 16 MB X X X X X X X X X
SSR-GSX31-02 2-port 1000 SX X X X X X X X X X X X X X X X
SSR-GSX31-04 4-port 1000 SX X X X X X X X X X X X X X X X
SSR-GTX32-02 2-port 1000 TX X X X X X X X X X X X X X X X
SSR-GTX32-04 4-port 1000 TX X X X X X X X X X X X X X X X
SSR-HFX11-08 8-port 100BASE-FX – 4 MB X
SSR-HFX21-08 8-port 100BASE-FX – 16 MB X
SSR-HFX21-08-AA 8-port 100BASE-FX – 16 MB X X X X X X X X X X
SSR-HFX29-08 8-port 100BASE-FX SMF X
SSR-HFX29-08-AA 8-port 100BASE-FX SMF X X X X X X X X X X
SSR-HSSI-02 2-port HSSI X
SSR-HSSI-02-AA 2-port HSSI X X X X X X X X X X
SSR-HSSI-02-CK 2-port HSSI with external clocking X X X X X X X X X X
SSR-HTX12-08 8-port 10/100 TX – 4 MB X
SSR-HTX12-08-AA 8-port 10/100 TX – 4 MB X X X X X X X X X X
SSR-HTX22-08 8-port 10/100 TX – 16 MB X
SSR-HTX22-08-AA 8-port 10/100 TX – 16 MB X X X X X X X X X X
SSR-HTX32-16 16-port 10/100 TX – 16 MB X X X X X X X X X X X X X
SSR-POS21-04 4-port OC-3/STM-1 POS MMF X X X X X X X X X X X X X X X
SSR-POS29-04 4-port OC-3/STM-1 POS SMF X X X X X X X X X X X X X X X
SSR-POS31-02 2-port OC-12/STM-4 POS MMF X X X X X X X X X X X X X X X
SSR-POS39-02 2-port OC-12/STM-4 POS SMF X X X X X X X X X X X X X X X
SSR-SERC-04 4-port Serial, compression X
SSR-SERC-04-AA 4-port Serial, compression X X X X X X X X X X

HARDWARE REQUIREMENTS
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 13 of 31
F0615-J
Pre
AA AA – Series T – Series
X-Pedition
Feature Set /
Part Number
Description
Weighted Fair Queuing Network Address Translation Server Load Balancin
g
Per Flow Rate Limitin
g
Flow Aggregate Rate Limitin
g
Per Protocol VLAN Established Bit ACL TOS Rewrite Layer 4 Bridging Multiple IPX Enca
p
sulation
Per Port Rate Limiting Aggregate Rate Limiting Jumbo Frame Support Weighted Fair Queuing Weighted Random Early Detection
802.1Q Multicast Port Re
p
lication
SSR-SERCE-04 4-port Serial, compression &
encryption X
SSR-SERCE-04-AA 4-port Serial, compression &
encryption X X X X X X X X X X
ER16
ER16-04 4-port 1000BASE GBIC X X X X X X X X X X X X X X X
ER16-08 8-port 1000BASE GBIC X X X X X X X X X X X X X X X
ER16-ATM29-02 2-port ATM OC3 X X X X X X X X X X X X X X X
ER16-FDDI-02 2-port FDDI X X X X X X X X X X X 1 X X X
ER16-GTX32-04 4-port 1000BASE-TX X X X X X X X X X X X X X X X
ER16-GTX32-08 8-port 1000BASE-TX X X X X X X X X X X X X X X X
ER16-HFX31-24 24-port 100BASE-FX (MMF) X X X X X X X X X X X X X X
ER16-HFX39-24 24-port 100BASE-FX (SMF) X X X X X X X X X X X X X X
ER16-HSSI-02-CK 2-port HSSI with external clocking X X X X X X X X X X
ER16-OS16-01 1-port 10-Gigabit Ethernet module
for ER16 (1 slot configuration) X X X X X X X X X X X 2 X X X X
ER16-OS26-01 1-port 10-Gigabit Ethernet module
for ER16 (2 slot configuration) X X X X X X X X X X X 2 X X X X
ER16-POS-21-04 4-port OC-3/STM-1 Packet over
SONET/SDH MMF module [T-
Series] for ER16
X X X X X X X X X X X X X X X
ER16-POS-29-04 4-port OC-3/STM-1 Packet over
SONET/SDH SMF module [T-Series]
for ER16
X X X X X X X X X X X X X X X
ER16-POS-31-02 2-port OC-12/STM-4 Packet over
SONET/SDH MMF module [T-
Series] for ER16
X X X X X X X X X X X X X X X
ER16-POS-39-02 2-port OC-12/STM-4 Packet over
SONET/SDH SMF module [T-Series]
for ER16
X X X X X X X X X X X X X X X
ER16-SERC-04-AA 4-port Serial, compression X X X X X X X X X X
ER16-SERCE-04-A 4-port Serial, compression &
encryption X X X X X X X X X X
ER16-SX-08 8-port 1000BASE-SX X X X X X X X X X X X X X X X
ER16-TX-24 24-port 10/100BASE-TX X X X X X X X X X X X X X X
ER16-TX-32 32-port 10/100BASE-TX X X X X X X X X X X X X X X
1SSR-FDDI-02 jumbo frame support is limited to 4500 bytes.
2The ER16-OS16-01 and ER16-OS26-01 perform aggregate rate limiting in firmware only.

NETWORK MANAGEMENT SOFTWARE SUPPORT
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 14 of 31
F0615-J
NETWORK MANAGEMENT SOFTWARE SUPPORT:
The following table displays information on the Network Management Software that supports this release:
NMS Platform Version Part Number
NetSight Element Manager 3.1 NS-EM-CD
NS-EM-LIC-1
NS-EM-LIC-5
NS-EM-LIC-10
NS-EM-LIC-20
NetSight Atlas Console 1.2 NSA-CD
NSA-LIC
NetSight Atlas Console Lite 1.2 NSA-L-CD
NSA-L-LIC
NetSight Atlas Inventory Manager 1.3 NSA-IM-CD
NSA-IM-LIC
NetSight Atlas Router Services Manager 2.0 NSA-RSM-CD
NSA-RSM-LIC
NOTE: Network Management Software may not utilize the latest features in the System Firmware. Enterasys
Networks recommends reviewing the release notes included with the user’s specific Network Management
Platform for more information.

INSTALLATION AND CONFIGURATION NOTES
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 15 of 31
F0615-J
INSTALLATION AND CONFIGURATION NOTES:
Password Recovery
If an X-Pedition password is lost and the user is unable to log in or enter Enable mode, please refer to the
Enterasys Global Knowledgebase at http://knowledgebase.enterasys.com/esupport/ . Click Search by ID and
enter TK0306-9.

NEW FEATURES AND ENHANCEMENTS IN E9.1.7.0
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 16 of 31
F0615-J
NEW FEATURES AND ENHANCEMENTS IN E9.1.7.0:
NEW FIRMWARE SUPPORT
The E9.1.7.0 system firmware provides support for the new features and enhancements below. For more
information on any of these enhancements, please see the Enterasys X-Pedition User Reference Manual or
Native CLI Reference Manual.
10-Gig Support of Link Aggregation
SmartTRUNK no protocol link aggregation is now supported on 10-Gig interface modules (ER16-OS26-01 and
ER16-OS16-01). This capability permits users to aggregate two or more 10-Gig interfaces and removes the
restriction previously identified as F3493. No support for DEC Hunt Group or 802.3ad (LACP) is provided at this
time although 10-Gig compatibility with 802.3ad is planned for a subsequent release.
PIM-SM Support of 802.1Q trunks
Compatibility between PIM-SM multicast routing and 802.1Q trunks is now provided allowing users to utilize PIM-
SM multicast capabilities on interfaces with 802.1Q tagged packets.
AppleTalk Features
Two new AppleTalk capabilities are introduced with this release: QoS and CPU utilization.
All ingress and egress AppleTalk traffic is normally passed through the system on the low priority queue. Using a
CLI command, one can now specify which of the four X-Pedition queues (control, high, medium or low) will carry
AppleTalk egress traffic thus providing a measure of outbound QoS control.
Introduced in this release is an informational error message that is generated when the CPU utilization of the
Advanced Routing Engine (ARE), which supports AppleTalk data forwarding, exceeds 95% for one minute.
File Delete Command Enhancement
For ER16 or 8x00 systems configured with two control modules, users may now delete files from the backup
control module using the file delete command.
Display of Host Name in Syslog Messages
Introduced in this release is an improvement to Syslog message output that includes the host name. The
message format is <###> Mmm dd hh:mm:ss HOSTNAME MESSAGE where:
Mmm dd – month and day
hh:mm:ss – hour:minute:second
HOSTNAME – the name of the host machine
MESSAGE – the actual message

NEW FEATURES AND ENHANCEMENTS IN E9.1.7.0
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 17 of 31
F0615-J
Display of the System FPGA Revision
A capability has been added that permits the display of the system FPGA revision number as illustrated in the
example below.
SYSTEM# system show hardware
Hardware Information :
System type : ER16, Rev. 0
CPU Module type : CPU-ER16 (CM4), Rev. 0
Processor : R7000, Rev 3.2, 380.00 MHz
Icache size : 16 Kbytes, 32 bytes/line
Dcache size : 16 Kbytes, 32 bytes/line
CPU Board frequency : 95.00 MHz
Backplane frequency : 62.50 MHz
System FPGA : Rev. 20 ÅNew Line
Switching Fabrics : 1 (Active = Fabric 2)
PCMCIA card : 32MB flash memory card (mounted on slot0: or slot1:)
System Memory size : 256 Mbytes
Network Memory size : 256 Mbytes
MAC Addresses
System : 0001f4:c2ff6d
10Base-T CPU Port : 0001f4:c2ff6e
Internal Use : 0001f4:c2ff6f -> 0001f4:c2ffac
CPU Mode : Active
Redundant CPU slot : Not present

NEW FEATURES AND ENHANCEMENTS IN E9.1.7.0
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 18 of 31
F0615-J
NEW HARDWARE SUPPORT
10-Gigabit Ethernet (ER16-OS16-01)
This release introduces support for the ER16-OS16-01, an optical fiber-based 10-Gigabit Ethernet module for the
ER16 platform. This one slot card provides a single modular port of IEEE 802.3ae standards-based connectivity
and its optical interfaces are based on fully compliant IEEE 802.3ae SC duplex fiber-optic connectors. Supported
interfaces include the following:
Part Number Connectivity Description Maximum Length
10GBASE-ER Single port 1550 nm serial SMF 40 km
10GBASE-LR Single port 1310 nm serial SMF 10 km
10GBASE-LX4 Single port 1310 nm serial SMF
Single port 1310 nm serial MMF
10 km
300 m
10GBASE-SR Single port 850 nm serial MMF 300 m

ISSUES RESOLVED IN E9.1.7.0
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 19 of 31
F0615-J
ISSUES RESOLVED IN E9.1.7.0:
The following tables provide brief descriptions of the issues resolved in this release. E9.1.7.0 includes all issues
resolved in the E9.0.7.7 System Firmware Maintenance Release (see the E9.0.7.7 Release Notes for details).
10-Gigabit I.D.
Priority queue settings on the ER16-OS26-01 may cause the X-Pedition to experience ingress buffer
overflows.
F4188
Entering the port show mc-vlan-encap all-ports command from the CLI erroneously displays the
ER16-OS26-01 system ports.
F4319
Access Control List (ACL) I.D.
If a user applies multiple ACLs to a port, the acl show command may not display all of the ports in
the "Applied Port(s)" field.
F4115
F4357
When using the acl-edit <acl_name> command to edit ACL data, users cannot remove all
commands associated with the ACL from the active configuration without rebooting the router.
F4328
Advanced Routing Engine (ARE) I.D.
The ARE learns MAC addresses from all forwarded AppleTalk packets. The ARE should learn MAC
addresses from AARP Response packets only.
F4142
The appletalk ping <address> command will fail if the target address belongs to an AppleTalk
interface on the same router that initiated the ping.
F4147
Border Gateway Protocol (BGP) I.D.
Although the BGP Import policy filters routes correctly, these routes do not appear in the route table. F4347
Command Line Interface (CLI) I.D.
The system image command options use inconsistent naming schemes and may generate
messages that are unclear to users. Furthermore, default behavior varies between commands.
F3609
If a serial console session times out after the X-Pedition prompts the operator for a reply to a
command they entered, the router may core the next time the console is activated.
F4272
Negating or removing a command that contains a quoted string from the active configuration may
cause the router to core.
F4299
When a user adds commands to the CLI through a cut-and-paste operation, the router may display
the “more” prompt before the CLI finishes processing the commands.
F4325
When a user enters the copy active to scratchpad command from a CLI session, then closes the
session without issuing the logout or exit command, future CLI sessions will hang when attempting
to perform any operations that involve accessing the active configuration.
F4387
Users cannot select the unicast or multicast options with the ip-router policy import source and
ip-router policy aggr-gen destination commands.
F4448
Distance Vector Multicast Protocol (DVMRP) I.D.
Clients attached to a DVMRP-enabled interface that is also an 802.2Q trunk port may see multicast
traffic requested by a client in a different VLAN that is also part of that trunk port.
F4316

ISSUES RESOLVED IN E9.1.7.0
10/02/03 P/N: 9038090-53 Subject to Change Without Notice Page: 20 of 31
F0615-J
Hot Swap I.D.
Under rare circumstances, the system may occasionally core when hot swapping a line card into the
router.
F2333
Internet Protocol (IP) I.D.
If an X-Pedition with ip enable reverse flow all configured receives an invalid TCP/UDP packet of a
specific type, the router may core.
F4345
Layer-4 I.D.
An X-Pedition configured with Layer-4 bridging will respond incorrectly to an ICMP request that is
not destined for the router.
F4359
F4297
Link Aggregate Control Protocol (LACP) I.D.
LACP SmartTRUNK connections that use either the default timeout value or the “short” timeout
value may not successfully restore the connection with another system that has rebooted.
F4405
F3910
Load Balancing I.D.
The load-balancing group and server options app-int and ping-int will not function properly if set to
a value greater than 255.
F4421
Memory I.D.
When a user adds ports to a SmartTRUNK via the smarttrunk add ports <portlist> to <smarttrunk>
command, a small memory leak may occur if the command fails.
F4443
If an X-Pedition SSH client using SSHv1 fails to connect to a remote SSH server during the key
exchange phase, the router may leak up to several hundred bytes of memory (based on system
configuration).
F4456
Multicast I.D.
When a multicast index changes, some flows may not update to the new index, causing the
X-Pedition to send untagged flows over a Q-trunk.
F3794
UDP multicast packets with a TTL=1 cause the X-Pedition to allocate Q-trunk replication indices
without an associated hardware flow.
F4446
Open Shortest Path First (OSPF) I.D.
Under extremely rare circumstances, the X-Pedition may core if it attempts to calculate the SPF on
an entry that is no longer valid when the router adds or deletes large amounts of OSPF ASE routes.
F4273
The default route is missing from the route table for a stubby or totally stubby area. F4554
Protocol Independent Multicast (PIM-SM) I.D.
An unlikely sequence of route changes may cause the X-Pedition to core. F3283
F3758
If the X-Pedition’s configuration contains the pim igmp trace local-options none and ip-router
global set trace-state on commands, PIM IGMP trace messages continue to display on the screen.
F4313