Enustech ImFONE CP User manual

Enustech Inc.
Revision No 1.0 Page: 1
User Manual

Enustech Inc.
Revision No 1.0 Page: 2
User Manual
imFONE CP gives wireless freedom to the internet phone.
Contents
1. Product Introduction
1.1 Features
1.2 Specifications
1.3 Packaging
2.imFONECPOverview
3. Viewing the Menu Before connecting the imFONE CP Initialization Screen
3.1 CONNECT
3.2 BLUETOOTH
3.3 SETTINGS
4.PreparationBeforeConnecting
4.1 Components
4.2 imFONE S Installation
4.3 imFONE M Installation
5. Connecting the Bluetooth Devices
5.1 Pairing imFONE CP
5.2 Connecting imFONE CP
6.Howtouse
6.1 Initializing (Introductory) screen view
6.2 Menu Selection
6.3 Making Calls
6.4 Receiving Calls
6.5 Holding Calls
6.6 Ending Calls
6.7 Viewing the Recent Calls List
6.8 Returning to the [Start] menu.
6.9 How to use the Presenter
6.10 Muting Button Sound
6.11 Disconnecting Bluetooth
7.FAQ
8.Notice
9.RegulatoryNotice
10. Address Information

Enustech Inc.
Revision No 1.0 Page: 3
User Manual
Please fully charge the imFONE CP after purchasing
1. Product Introduction
What is imFONE CP?
ImFONE CP is a cordless internet phone which you can use as an internet phone
in conjunction with your PC. With this easy to install phone and its stylish, mobile
phone-like design, you can place a crystal clear phone call through the internet
network.
1.1 Features
①Free internet phone calls between VoIP Softphone buddies
②Crystal clear sound through echo cancellation
③Making calls/ Receiving calls
④Multi-functions
⑤Conference and video call functionality
1.2 Specifications
- Bluetooth® Qualified: Bluetooth Ver. 1.2 Compliant (Class1)
- Radio Frequency Range: 2.402 ~ 2.480 GHz
- Transmit Power & Receive Sensitivity: 17dBm(Typical 15dBm), -85dBm
- Service Distance: Up to 50 meters (164feet) on an open field
- Service Profile: Cordless Telephone Profile
- Security: 56 bit encryption
- Display: 32X128 pixels, Monochrome
- Power Source: Battery-Rechargeable 840mALithium-Ion Polymer
Charger-USB charger (Current:460mA/h, Voltage:4.6~5.0V DC)
TTA 24pin standard charger (for mobile phone)
- Charging Time: USB Charger-3 hours
※TTA 24pin standard charger(for mobile phone): 2.5 hours
※Charging time can depend on the PC’s system capacity.
- Operating Time: Standby-Up to 38 hours
Talk Time-Up to 8 hours
- Certification: SIG, CE, FCC, MIC
- System Requirements: 2000/XP
※A driver must be installed to use imFONE with Windows 98 systems.

Enustech Inc.
Revision No 1.0 Page: 4
User Manual
1.3 Packaging
- imFONE CP Plus
- imFONE CP Basic : imFONE S and the Manager program CD are not included
in the package.
2.ImFONE CP Overview

Enustech Inc.
Revision No 1.0 Page: 5
User Manual
3. Viewing the Menu Before Connecting imFONE CP
◆Initial Screen
The initial screen is displayed before the imFONE CP is connected to the Bluetooth device (like
the imFONE S, M or STAP-100). Please note that the antenna symbol( ) is not displayed
before the connection is made between the imFONE CP and the Bluetooth device.
Before connecting, the Menu selections displayed on the LCD are [CONNECT], [BLUETOOTH],
[SETTINGS].
3.1 CONNECT
This menu is for connecting the imFONE CP with the inserted Bluetooth device.
▶When the bond device information doesn’t exist on the imFONE CP, the message
“No bond device exists” will be displayed and the introductory screen will be shown. At this
point, the imFONE CP can be used after registering the device through the [BLUETOOTH]
menu.
▶When the bond device information exists on the imFONE CP, the device named imFONE S
or imFONE M will automatically try to connect with the imFONE CP.
After making a successful connection, the message ”Connected” will be displayed and it will be
possible to return to the initial screen.

Enustech Inc.
Revision No 1.0 Page: 6
User Manual
3.2 BLUETOOTH
①PAIR DEVICE
To use the internet phone through the imFONE CP, the Bluetooth dongle named imFONE S or
imFONE M, must be registered on the imFONE CP. We call this is“Pairing”. You can set up
“Pairing”on the [PAIR DEVICE] menu.
※Please refer to 5. Pairing for the steps on how to set up pairing.
②Bond Info
The bond device information in the imFONE CP is displayed.
③My Information
The address and firmware version of the imFONE CP is displayed.
3.3 SETTINGS
①PRESENTER
In the [SETTINGS] menu, if the Presenter is set to “On”, the imFONE CP can be used as a
laser pointer. This setting will also allow you to move forward and backwards through an MS
PowerPoint presentation using the (▲▼)arrow keys.
※For more information, please refer to section 7.8 How to use Presenter.
②BUTTON SOUND
You can turn on or mute button sound while pressing buttons. In the Settings menu, if the
[BUTTON SOUND] is set to “off”, button sound will be muted.
※For more information, please refer to section 7.9 Muting Button Sound
4. Preparation Before Connecting
To use the internet phone and our dongle, imFONE Manager must be installed on the PC to
provide the link between the internet phone and the imFONE CP(Bluetooth cordless phone).
The Bluetooth device, named imFONE S or imFONE M, must be
registered in the imFONE CP before it can provide a link between the computer and
the phone. This is called “Pairing”and it needs to be set only once when you initially
register bond device information. By changing the information, the imFONE CP can
be paired with other Bluetooth devices.

Enustech Inc.
Revision No 1.0 Page: 7
User Manual
4.1 Components
4.2 imFONE S Installation
①Install an internet phone program, such as Skype, on the PC.
②Run the internet Phone program that was just installed.
※Please refer to the internet phone program’s installation guide on their web site.
③Insert the CD from the imFONE CP package and install the imFONE Manager
program for the imFONE CP.
Click next Click Install after choosing Install Location.

Enustech Inc.
Revision No 1.0 Page: 8
User Manual
→
Click Finish
④After completing the installation, run imFONE Manager.
⑤Plug the imFONE S into the USB port of the PC.
4.3 imFONE M Installation
If you use the imFONE M to connect the PC and the imFONE CP, it will not be necessary to
install an internet phone program or the imFONE Manager program because imFONE M is
equipped with 128MB memory with a pre-installed SKYPE(or other VoIP) program, all Bluetooth
stacks and the imFONE Manager program.
After plugging the imFONE M into the PC, please wait until the imFONE icon appears
in the tray bar of the PC and the Skype Softphone pops up.
It initially takes around 30 seconds to 1.5 minutes. Afterwards, you can set the pairing.

Enustech Inc.
Revision No 1.0 Page: 9
User Manual
※If you initially insert the imFONE M into the PC, the PC will ask if you wish to reboot
PC according to system specifications. At this point, you can use the imFONE after clicking the
[Cancel] button.
5. Connecting the Bluetooth Devices
5.1 Pairing the imFONE CP
①Press [menu], select [BLUETOOTH] and then select [PAIR DEVICE].
②When [PAIR DEVICE] is selected, the message,
“Enter PIN Code”will be displayed.
Input the “PIN code”of imFONE S or imFONE M.
※The current PIN code of the imFONE S or imFONE M is “0000”.
③After inputting the pin code, press the [Select] button and the imFONE S or imFONE
M will automatically try to connect to the imFONE CP. After making a successful
connection, the message ”Connected”will be displayed, followed by the initial screen.

Enustech Inc.
Revision No 1.0 Page: 10
User Manual
④If the imFONE CP is perfectly connected, theAntenna Mark ( ) will be displayed
and the blue icon( ) in the PC’s bottom right tray bar will appear. If both
the Antenna Mark and the PC tray icon are displayed, the internet phone is ready for usage.
5.2 Connecting imFONE CP
①Press [Menu], select [1. CONNECT], and then press the [Select] button.
②If the imFONE CP is perfectly connected, theAntenna Mark ( ) will be displayed
and the blue icon( ) on the PC’s bottom right tray bar will appear.
If both the Antenna Mark and the PC tray icon are displayed, the internet phone is
ready for usage.
6. How to Use
6.1 Initial (Introductory) Screen
View After Connecting

Enustech Inc.
Revision No 1.0 Page: 11
User Manual
6.2 Menu Selection
6.3 Making Calls
There are three ways to make calls:
-Direct to Inputted Number: Directly input the phone number which you want to dial
using the keypad and press the [Call] button of the imFONE CP to make the call.
- Call using the Recent Calls List: Press the [Call] button of the imFONE CP and the
Recent Calls List will be displayed on the LCD. After selecting the specific user you
want to call using the (▲,▼) buttons, press the Call button to make the call.
- Call using the [PHONE BOOK] list: Press the Menu button of imFONE CP and select
[PHONE BOOK], then select which group you want to call.After selecting the specific
user you want to call, press the [Call] button to make the call.

Enustech Inc.
Revision No 1.0 Page: 12
User Manual
※Pushing the [Select] button allows you to scroll through the listings on the buddy list
using the (▲,▼) buttons.
※[PHONE BOOK] allows you to send the contents of the “phone numbers”menu in the
Skype Softphone to the imFONE CP.
6.4 Receiving Calls
If the bell rings, press the [Call] button of the imFONE CP and start talking.
※While Skype Online Status is set on [Do Not Disturb], the bell of the imFONE CP/Skype
softphone will not ring when calls are received. At this time, you can receive the calls by
pressing down on the [#] and [Call] buttons simultaneously.
6.5 Holding calls
While you're receiving/making calls, you can receive a second call by placing the first call on
hold. To place your call on hold, press the [call] button of imFONE CP to connect to the second
caller and the first call will automatically be placed on hold. After ending the conversation with
the second caller, press the [call] button again and you will be reconnected with the first caller.
6.6 Ending Calls
If you want to hang up, press [Finish] to end the call.
6.7 Viewing the Recent Calls List

Enustech Inc.
Revision No 1.0 Page: 13
User Manual
6.8 Returning to the Initial Screen.
If you press [Finish] at any time, you can return to the initial screen (the screen
where “imFONE CP”or “Skype Phone”is displayed).
6.9 How to Use the Presenter
①Press [Menu] and select [SETTINGS]
②Once in the [SETTINGS] menu, the [PRESENTER] menu can be displayed by using the (▲,
▼) arrow keys.
③Use the (◀,▶) arrow keys to select “ON”and press the [Select] button.
At this time, you can return to the initial screen.
④If the [PRESENTER] function is selected, you can use imFONE CP like a Presenter. The (▲,
▼) arrow keys are used to page Up/Down. The laser pointer will run by pressing the [Select]
button.
※After connecting by Bluetooth, you can use the Presenter. If Bluetooth is not connected, the
Presenter is not available.

Enustech Inc.
Revision No 1.0 Page: 14
User Manual
※After connecting by Bluetooth, you can use the Presenter. If Bluetooth is not connected, the
Presenter is not available.
6.10 Muting Button Sound
①Press [Menu] and select [SETTINGS].
②Once in the [SETTINGS] menu, the [BUTTON SOUND] menu can be displayed by using the
(▲,▼) arrow keys.
③Use the (◀,▶) arrow keys to select “ON”and press the [Select] button. At this time, you
can return to the initial screen.
④If you set the button sound to “Off”, the button sounds on the imFONE CP will be muted.
6.11 Disconnecting Bluetooth
①After pressing [Menu], select the [BLUETOOTH] menu from amongst the [PHONE BOOK],
[BLUETOOTH], and [SETTINGS] menus using the (▲,▼) arrow keys.
②After “Disconnect”is displayed, press the [Select] button and the connection will be
released. At this time, you can return to the initial screen before connecting.

Enustech Inc.
Revision No 1.0 Page: 15
User Manual
※If you change the bond device on the imFONE CP, you will first need to disconnect the
current bond device and then register the new device.
■Tip!!
▶If you selected the wrong list in [Menu] or [Call] or want to go back to the previous step,
press the [◀] button in the middle of the phone body.
▶To recall the last number called, press the [Call] button on the Start screen (the screen which
imFONE CP or Skype Phone is displayed)
7. FAQ
▶How can I initialize my imFONE CP ?
You can initialize your imFONE CP by poking a pointed object into the Reset Hole and holding
for one second.

Enustech Inc.
Revision No 1.0 Page: 16
User Manual
▶How can I turn on or turn off my imFONE CP ?
▷You can power on or off pressing down on the [Finish] button for 5 seconds.
▶I am repeatedly failing to set the pairing. What should I do?
▷Please make sure that the previously inputted PIN code is correct Pin code. If the PIN code
is correct, please reinsert the imFONE S/M into the PC and then initialize the imFONE CP by
poking a pointed object into the Reset Hole and holding for one second. At this point, please try
to reset the pairing.
▶How can I check to see if the imFONE is plugged in properly?
▷If imFONE CP is properly plugged in, the Red icon (in the right tray bar of the PC)
will be changed to a Yellow icon. If the Skype phone logo is displayed in the LCD
of the ImFONE CP, it can be used.

Enustech Inc.
Revision No 1.0 Page: 17
User Manual
→
▶Placing a call is done, but I can’t make call through the Skype Phone.
▷If the announcement pop up screen is displayed on the Skype phone screen, close the pop
up screen and try to make the call again.
▷If the current network is not stable, requesting a call through the Skype Phone will not
happen or will be delayed.
▶Even though the call has ended, the LCD Menu of imFONE CP does not redisplayed the
Main menu.
▷If the announcement pop up screen is displayed on the Skype phone screen, close the pop
up screen and click the [Finish] button of the imFONE CP.
▷If the current network is not stable, requesting a call through the Skype Phone will not
happen or will be delayed.
▶The popup window claiming that “the device is occupied by other program”is displayed.
▷If the imFONE CP is pulled out while you’re calling or requesting a call, this message
will be displayed. Close all programs and reboot the PC.
▷This message may also occur if you are using an imFONE S/HS and an imFONE M/HM
simultaneously. Remove the imFONE that you are not using and try to make call again. If the
same problem continues to occur, close all programs and reboot the PC.
▶I cannot hear the voice of the other person.
▷There are two possible resolutions that relate to the sound not being set.
Please check the following:
Double click Start > Control Panel > Sound &Audio Device.
After pressing the Audio Tab, please check to see if the imFONE dongle exists
in the basic Sound Device Play and Record.

Enustech Inc.
Revision No 1.0 Page: 18
User Manual
The imFONE dongle name should be listed as:
Windows 2000: USBAudio
Windows XP: imFONE USBAudio
If it doesn’t exist, reinsert the imFONE dongle into the PC after pulling it out.
If it exists, after pressing the Audio Tab, Click [Volume-Option-Properties-Mixer device] and
select.
→→

Enustech Inc.
Revision No 1.0 Page: 19
User Manual
→
-Windows 2000: USBAudio
-Windows XP : imFONE USBAudio.
Then, turn up the Wave Volume
8. Notice
- If you use imFONE S/HS or imFONE M/HM simultaneously, there may be problems
with the sound device. Please use only one imFONE device at a time.
- Close all popup screens that have flashed on the Skype Phone screen. These popup
screens may prevent calls.
- If sound is not heard while calling, please refer to the “Check Point of Sound Device”.
- If the bell doesn’t ring when receiving calls, please check to see if other speakers or headsets
are connected to the PC. If something else is connected, please turn that device’s volume up
and you should hear the ringing sound. At this point, you can make phone calls by pressing the
[Call] button of the imFONE CP.
- Do not remove the imFONE CP while you’re calling or requesting a call. It may cause the
phone to not connect to Skype Phone.
- When the battery is almost fully discharged, the imFONE CP will automatically turn off. If the
imFONE CP does not turn on, please fully charge it.
- The key button will not run in the [Presenter] mode. To use the button, please change the
mode by pressing [off] on the [Presenter]
- Please note that the imFONE CP only supports the Phone mode amongst the various modes
on the imFONE Manager program.

Enustech Inc.
Revision No 1.0 Page: 20
User Manual
9. Regulatory Notice
EXPOSURE TO RADIO FREQUENCY
The radiated output power of this internal wireless radio is far below the FCC radio frequency
exposure limits. Nevertheless, the wireless radio shall be used as described in the manual.
The internal wireless radio operates within guidelines found in radio frequency safety standards
and recommendations, which reflect the consensus of the scientific community.
Enustech therefore believes the internal wireless radio is safe for use by consumers. The level
of energy emitted is far less than the electromagnetic energy emitted by wireless devices such
as mobile phones. However, the use of wireless radios may be restricted in some situations or
environments, such as abroad airplanes. If you are unsure of restrictions, you are encouraged
to ask for authorization before turning on the wireless radio.
NOTE: Modifications not expressly approved by Enustech, Inc. could void the user’s authority to
operate the equipment.
FCC REGISTATION INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference; and
2. This device must accept any interference received, including interference that may
cause undesired operations.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the