Polycom VVX 500 Manual

Polycom VVX
Admin Guide
Schmooze Com Inc.
500, 600 & 1500
DND
HEADSET
HOLD
TRANSFER
TRANSFER
CONF
SP PHONE
REDIAL
APP
MENU
DIR
MSG
1
ABC
GHI
JKL
MNO
PQRS
TUV
WXYZ
OPER
DEF
2
3
4
5
6
7
8
9
0
#

How To Find The IP Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Platform” option and press the “Select” button.
4. Scroll down to the “Phone” option and press the “Select” button.
© Copyright Schmooze Com, 2012
5. Use the up/down arrow key to scroll through the list of information to see the IP Address.
How To Find The MAC Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Network” option and press the “Select” button.
4. Scroll down to the “Ethernet” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see
the MAC Address.
How To Set The Configuration Server
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select” button.
6. Scroll down to the “Network Configuration” option and press the
“Select” button.
7. Scroll down to the “Server Menu” option and press the “Select” button.
8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.
The Server address would be the IP address of your PBX.
How To Factory Default
Quick Steps
1.Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select button”.
6. Scroll down to the “Reset to Default” option and press the “Select” button.
7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Platform” option and press the “Select” button.
4. Scroll down to the “Phone” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see the IP Address.
How To Find The MAC Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
© Copyright Schmooze Com, 2012
3. Scroll down to the “Network” option and press the “Select” button.
4. Scroll down to the “Ethernet” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see
the MAC Address.
How To Set The Configuration Server
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select” button.
6. Scroll down to the “Network Configuration” option and press the
“Select” button.
7. Scroll down to the “Server Menu” option and press the “Select” button.
8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.
The Server address would be the IP address of your PBX.
How To Factory Default
Quick Steps
1.Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select button”.
6. Scroll down to the “Reset to Default” option and press the “Select” button.
7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Platform” option and press the “Select” button.
4. Scroll down to the “Phone” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see the IP Address.
How To Find The MAC Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Network” option and press the “Select” button.
4. Scroll down to the “Ethernet” option and press the “Select” button.
© Copyright Schmooze Com, 2012
5. Use the up/down arrow key to scroll through the list of information to see
the MAC Address.
How To Set The Configuration Server
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select” button.
6. Scroll down to the “Network Configuration” option and press the
“Select” button.
7. Scroll down to the “Server Menu” option and press the “Select” button.
8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.
The Server address would be the IP address of your PBX.
How To Factory Default
Quick Steps
1.Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select button”.
6. Scroll down to the “Reset to Default” option and press the “Select” button.
7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Platform” option and press the “Select” button.
4. Scroll down to the “Phone” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see the IP Address.
How To Find The MAC Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Network” option and press the “Select” button.
4. Scroll down to the “Ethernet” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see
the MAC Address.
How To Set The Configuration Server
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
© Copyright Schmooze Com, 2012
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select” button.
6. Scroll down to the “Network Configuration” option and press the
“Select” button.
7. Scroll down to the “Server Menu” option and press the “Select” button.
8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.
The Server address would be the IP address of your PBX.
How To Factory Default
Quick Steps
1.Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select button”.
6. Scroll down to the “Reset to Default” option and press the “Select” button.
7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Platform” option and press the “Select” button.
4. Scroll down to the “Phone” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see the IP Address.
How To Find The MAC Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Network” option and press the “Select” button.
4. Scroll down to the “Ethernet” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see
the MAC Address.
How To Set The Configuration Server
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select” button.
© Copyright Schmooze Com, 2012
6. Scroll down to the “Network Configuration” option and press the
“Select” button.
7. Scroll down to the “Server Menu” option and press the “Select” button.
8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.
The Server address would be the IP address of your PBX.
How To Factory Default
Quick Steps
1.Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select button”.
6. Scroll down to the “Reset to Default” option and press the “Select” button.
7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Platform” option and press the “Select” button.
4. Scroll down to the “Phone” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see the IP Address.
How To Find The MAC Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Network” option and press the “Select” button.
4. Scroll down to the “Ethernet” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see
the MAC Address.
How To Set The Configuration Server
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select” button.
6. Scroll down to the “Network Configuration” option and press the
“Select” button.
7. Scroll down to the “Server Menu” option and press the “Select” button.
8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.
The Server address would be the IP address of your PBX.
© Copyright Schmooze Com, 2012
How To Factory Default
Quick Steps
1.Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select button”.
6. Scroll down to the “Reset to Default” option and press the “Select” button.
7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Platform” option and press the “Select” button.
4. Scroll down to the “Phone” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see the IP Address.
How To Find The MAC Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Network” option and press the “Select” button.
4. Scroll down to the “Ethernet” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see
the MAC Address.
How To Set The Configuration Server
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select” button.
6. Scroll down to the “Network Configuration” option and press the
“Select” button.
7. Scroll down to the “Server Menu” option and press the “Select” button.
8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.
The Server address would be the IP address of your PBX.
How To Factory Default
Quick Steps
1.Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
© Copyright Schmooze Com, 2012
5. Scroll down to the “Admin Settings” option and press the “Select button”.
6. Scroll down to the “Reset to Default” option and press the “Select” button.
7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Platform” option and press the “Select” button.
4. Scroll down to the “Phone” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see the IP Address.
How To Find The MAC Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Network” option and press the “Select” button.
4. Scroll down to the “Ethernet” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see
the MAC Address.
How To Set The Configuration Server
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select” button.
6. Scroll down to the “Network Configuration” option and press the
“Select” button.
7. Scroll down to the “Server Menu” option and press the “Select” button.
8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.
The Server address would be the IP address of your PBX.
How To Factory Default
Quick Steps
1.Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select button”.
6. Scroll down to the “Reset to Default” option and press the “Select” button.
© Copyright Schmooze Com, 2012
7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Platform” option and press the “Select” button.
4. Scroll down to the “Phone” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see the IP Address.
How To Find The MAC Address
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Status” option and press the “Select” button.
3. Scroll down to the “Network” option and press the “Select” button.
4. Scroll down to the “Ethernet” option and press the “Select” button.
5. Use the up/down arrow key to scroll through the list of information to see
the MAC Address.
How To Set The Configuration Server
Quick Steps
1. Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select” button.
6. Scroll down to the “Network Configuration” option and press the
“Select” button.
7. Scroll down to the “Server Menu” option and press the “Select” button.
8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.
The Server address would be the IP address of your PBX.
How To Factory Default
Quick Steps
1.Press the “Menu” button.
2. Scroll down to the “Settings” option and press the “Select” button.
3. Scroll down to the “Advanced” option and press the “Select” button.
4. Enter the admin password and press the “Enter” button. Default factory password is 456.
5. Scroll down to the “Admin Settings” option and press the “Select button”.
6. Scroll down to the “Reset to Default” option and press the “Select” button.
7. Scroll down to the “Format File System” option and press the “Select” button.
© Copyright Schmooze Com, 2012

Schmooze Com Inc.
http://schmoozecom.com
[phone]