EOB TS20 User manual
Fce
/
-
+
i
P
THERMOSWITCH
SOCKET
TS20
Temperature regulation of connected appliance
DESCRIPTION OF
CONTROLS
direct
heating
bodies
electric
tubular
radiators
electric
heating
plates
build-in temperature
sensor
= selection of functions
= selection of temperatures
= setting of
temperature,time,
functions
(ENTER),
information on required
temperature (PO:t),
present time/temperature
(CL:O/tE:P), sum of
operating hours (SU:MA),
and day (dE:n)
Utilization examples:
ECO Design
CONTROLS
build-in temperature
sensor
AUTO
MANU
PROG P
1 12 24
DISPLAY DESCRIPTION
OPERATING INSTRUCTIONS
1. FUNCTIONS OF TS20
indication of set time and
temperature program
After connection in 230V-socket is TS20 immediately ready for
use. If sign dO:bI
not fully charged and it is necessary let the TS20 in 230V-socket to
to remove TS20 from socket without losing the actual time and you can provide the
If the TS20 is not in 230V-socket the showed temperature is 2 °C lower than real
actual temperature.
1. AUTO : thermo-switch socket works according to program as set.
2. MANU P /
-
+
3. CLO : setting of present day and time.
4. PAr
5. PROG : programming mode.
6. OFF
After pushing the Fce /
-
+
.
comfort
indication of temperatures
economy
party
indication of
operating mode
If we disconnect TS20 from the network 230V, the TS20 comes to stanby mode
and only actual time will be shown on display (the colon symbol will not be
ashing) and the buttos will be functionless. The activation of the buttons you
can make by pressing the ibutton.
!
Note: If you do not push any button in 2 minutes, TS20 returns into set mode.
Longer pushing of /
-
+
buttons speeds up their functions.
indication of time/
temperature
2
Press the Fce /
-
+
select PA:r
i.
• PA:r1 iand with using of /
-
+
• PA:r3 shows on the display
with using of /
-
+
temperature and press i
• PA:r4 shows on the display
with using of /
-
+
temperature and press i
• PA:r2 shows on the display
with using of /
-
+
temperature and press i
Setting of parameters (constants) - “ PAr “
PA:r3 comfort temperature (factory setting 23°C)
PA:r4 party temperature (factory setting 25°C) P
PA:r2 economic temperature (factory setting 17°C )
2. PROCEED DURING PROGRAMMING
Before the programming itself, it is necessary to set present day, time and
Press the Fce /
-
+
select CLO
i
display, use /
-
+
i
d:1represents
Monday, d:2 Tuesday and d:7
setting, press Fce
Setting of current day and time - “ CLO “ function
PA:r1 Display option
tinformation on present temperature
Ccurrent time,
Press i
P
3
• PA:r5 shows on the display
with using of /
-
+
i
heating mode
cooling mode
PA:r5 Hysteresis (0,5°C set by default)
PA:r6 Adaptive start control (facotry setting as inactive --.--)
• PA:r6 shows on the display
starting the heating to reach the set temperature in required
time.
/
-
+
and for deactivation select .
4
PA:r7 Heating / Cooling mode
• PA:r8 shows on the display
/
-
+
i
Function „OPEN WINDOW DETECTION“
temperature rise again, or after change of required temperature or after 30 minutes.
socket.
PA:r8 Open window detection (factory setting as inactive --.--)
• PA:r7 shows on the display
for cooling.
with using of /
-
+
i
Press the Fce /
-
+
i.
By repeated pressing of /
-
+
options:
i1:U1 shows on display for
/
-
+
assign comfort, economic or party temperature to the setting
P
i1:U2 (the second time interval
Fce
Programming- “ PROG “ function
d:1 Monday d:5 Friday d1:5 Monday to Friday
d:2 Tuesday d:6 Saturday d6:7 Saturday to Sunday
d:3 Wednesday d:7 Sunday
Tabel for day selection
d1:7 all week
d:4 Thursday
Status indication of TS20:
AUTO (or MANU) is shown = output is switched on
AUTO (or MANU) blinks = output is switched o
• PA:r9 shows on the display
press i Fce
PA:r9 Firmware version
5
By simple pressing of /
-
+
change of required temperature. TS20 will maintain this temperature up to next
Short-term change of temperature in AUTO mode:
programm process on LCD
Set
2. Set
3.
Choose programmig of whole week d1:7
17:U1
17:U2 assig time 9:00 and temperature
7. 17:U3
17:U4
9. 17:U5P
17:U6 assig time 22:00 and temperature
Fce
AUTO mode.
EXAMPLE of Programm setting
[h]
16
25
Mo - Su
6
AUTO
1 12 24
If following error message is shown on the display, contact
immediately the manufacturer (it is dealing with a failure of
2.Program it according to instructions
3.
Installation:
Error messages:
handling. Press Fce Pand
-
together
simultaneous pressing Pand
+
Child lock:
7
If the room temperature drops under 3 °C, TS20 switch on automatic the connected
mode.
Press the Fce /
-
+
OFF
i
alternatively on the display. To cancel this function press Fce
Antifreeze protection
“ OFF “ function:
Press the Fce /
-
+
select function PA:r i
By pressing /
-
+
PA:r9 i.
Simultaneously press Pand
-
Note: Use only when necessary, all saved changes will be deleted!
! RESET - restoring the default settings
/
-
+
Specifi cation of TS20
Power 230 V / 50 Hz
Number of adjustable temp. 3 different temperatures for each day
Hysteresis 0,1 to 6°C in steps of 0,1°C
Minimal programming time 10 minute
Range of possible temp. 3°C to 40°C
Step of temperature setting by 0.5°C
Minimal step of indication 0,1°C
Measurement accuracy ± 1 °C
Protection IP20
Back-up battery NiMH 2,4 V/ > 100 hours
Output relay, max. 16 A
Working temperature 0 to 40 °C
THERMO-SWITCH SOCKET TS20
TS20 is a digitally switched socket for automatic regulation of electrical
heating systems (direct heating bodies, towel driers, fi res) in family houses,
ats,offi ces. Up to six time intervals with three temperature levels can be set
for each day.
Further advantages:
, , P
open window detection
adaptive start control
Send the socket for guarantee and after guarantee service to manufacturer’s address.
ELEKTROBOCK CZ s.r.o.
Blanenská 1763
Kuřim 664 34
Tel.: +420 541 230 216
www.elbock.cz
Pb
LEAD FREE
im Einklang mit
RoHS
Table of contents
