seeed studio ReSpeaker Pro Case User manual

ReSpeakerProCaseAssemblyInstructions


Step1.InstallReSpeakerCoreintothebottomcase
1.TiltReSpeakerCoreandinstallthenavigatorbuttonintothehole.
2.SpinReSpeakerCoretoputitdown.
Step2.FixReSpeakerCorewith3screws
•MakesuretheaudiojackandMicro-USBportontheboardalignwiththeholeson
thebottomcase.!

Step3.InsertReSpeakerMicArray
•PleaseconfirmtheinsertiondirectionofReSpeakerMicArray.

Step4.Snapthetopcap
•Alignthealignmentmarksonthetopcapandbottomcase,snapthemtogether.
alignment marks

Step5.Stickuprubbermat
•TearoffthePETsheetingontherubbermat.
•Stickuptherubbermattothebottomcaseandmakealignitwiththeredcircle.


Step6.Howtoopenthetopcap
•Thereare2groovesonthesideofthebottomcase.Placeyourthumbinagroove
andopenthetopcap.