Epcom PROAUDIO SF6200RM User manual
Read the instruction manual
Product name: Evacuaon Microphone
Brand: Epcom PROAUDIO
Model: SF6200RM
Nominal electrical characteriscs:
Input: 24 Vdc 2 W
Before making any connecons, make sure the equipment is completely turned off.
1.- Connect the gooseneck microphone to the connector marked as MIC on the top of the SF-6200RM base.
2.- Direct your SF6200RM with the help of the dip switch bank located on the back of the SF-6200RM base.
3.- Make the connecon from the CAN output of the SD-6200MA controller to the COM1 input of the
SF-6200RM.
DIP1: End-of-line resistance
DIP2 - DIP6: Configuraon of device address codes.
*Check the complete address table in the user manual.
Examples:
NOTE:
QUICK GUIDE
The device address code is
1.
CAN communication
resistance is open.
The device address code
is 2.
The device address code
is 3.
For more informaon about the product, please visit our website WWW.EPCOM.NET and search for the
model indicated at the beginning and go to the "DOWNLOADS" secon on the product page.
All our products come with a minimum one-year warranty, and you can obtain a copy of our policy at
WWW.EPCOM.NET.
To next SF-6200RM
4.- Connect the SF-6200RM to the power using the supplied adapter and turn it on with the switch on the
back of the SF-6200RM.
5.- Select the zone or group of zones where you want to make a real-me announcement and press the
"TALK" buon to open the audio channel to the selected zone or group of zones.
6.- Use the gooseneck microphone to deliver the voice message. Once you have finished delivering the
message, press the "TALK" buon to close the audio channel.
7.- You can make a general announcement by selecng the "ALL CALL" buon and pressing "TALK" to open
the audio channel to all zones.
Table of contents
