Superlux E205 User manual

www.superlux.com.tw
EN
E205
STUDIO CONDENSER
MICROPHONE
Description
Designed for critical home/project/professional studio
applications and live performances, this side-address
supercardioid studio condenser microphone delivers
exceptional detail and low noise. Along with its rugged
construction and high-performance specifications, the
E205 provides an exceptional level of consistency from
model to model.
Features
• Large diaphragm for smooth, natural sound and low
noise
• High SPL handling and wide dynamic range provide
unmatched versatility
• Supercardioid polar pattern reduces pickup of sounds
from the sides and rear, improving isolation of desired
sound source.
Specications
Type Back Electret Condenser
Polar Pattern Supercardioid
Frequency Response 30-18,000Hz
Sensitivity -38dBV/Pa (12.6mV)
Output Impedance 200Ω
Min. Load Impedance 1,000Ω
S/N Ratio 72dB
Equivalent Output Noise <22dB
Max. SPL >135 dB
Dynamic Range >113dB
Power Requirements 12–52V , 3.5mm
Finish Black
Connector XLR3M
Dimensions Ø54×150mm
(Ø2.13"×5.9")
Net Weight 400g (14.1oz)
E205 Frequency Response (Superardioid)
Included
YA2 threaded
adapter
HM85 pivoting
stand mount
Pouch

www.superlux.com.tw
EN
This information sheet contains important information
for the safe use of the product. Read and follow the
safety and handling instructions given here. Please keep
this information sheet for future reference. If you pass
on the product described overleaf, please enclose this
information sheet.
Safety instructions
Intended use
This device converts acoustic signals in electrical signals.
Any other use or use under the conditions excluded here
is considered improper and can lead to personal injury
or property damage. Neither the manufacturer nor the
distributor is liable for damage resulting from improper
use.
Choking hazard for children
Make sure that plastic sleeves, packaging, etc.
cannot get into the reach of babies and small
children. Do not allow children to use electrical
devices unsupervised. They could loosen parts of the
product, then swallow them and choke on them!
Place of operation
The device must not be used
Xat particularly high temperatures or humidity
Xin particularly dusty or polluted places
Xin places where it can be exposed to moisture
General handling
To prevent damage, never use force when handling the
product. Never immerse the product in liquids. Just wipe
it with a clean, dry cloth. Never use liquid cleaners such
as benzene, thinner, or flammable detergents to clean
the product.
Disposal
Old devices
Devices with this label are subject to the current
EU directive on waste electrical and electronic
equipment (WEEE directive) and may not be
disposed of with household waste, but only via
a suitable disposal company. Ask your local authority
or your specialist dealer about your options for proper
disposal.
Packagings
Environmentally friendly materials have been
selected for the packaging and are to be recycled.
Do not just throw away plastic sleeves, packaging,
etc., but recycle them. If necessary, note the instructions
and labels on the packaging.