Eplus L-2040D User manual

ELECTRO-HYDRAULIC 2-POST LIFT
L-2040D
ASSEMBLY MANUAL
Ver.19.9.1

Step
1
To disassembly the package and
remove all components and accessories.
L-2040D ASSEMBLY MANUAL

12 x
Step
2
To remove fixing bolts of packing brackets.
L-2040D ASSEMBLY MANUAL

Install area
Operator zone
Step
3
To move two columns to install area.
Pay attention: to recognize and decide
command and slave column’s position
to install.
L-2040D ASSEMBLY MANUAL

Step
4
To lift up two columns.
L-2040D ASSEMBLY MANUAL

Step
5
To measure the distance of two columns,
and two columns face each other accurately.
L-2040D ASSEMBLY MANUAL

Percussion drilling
chopping bit 18.5mm
depth 150mm
1Air purge to remove
dust inside of hole.
2
Insert bolt with bushes and
screw nut, not to tighten to
death, insert bushes under
the column baseplate to
adjust, by aid of spirit level
measurement to make
column to be vertical at 90°.
3
Insert long pin with
hammer to hit in to
the end。
4
Step
6
To fix well columns.
L-2040D ASSEMBLY MANUAL

Tighten the screw nuts to be dead.
5
Step
6
To fix well columns.
L-2040D ASSEMBLY MANUAL

Step
7
To install security lock
(command column).
L-2040D ASSEMBLY MANUAL

Step
8
To install security lock
(slave column).
L-2040D ASSEMBLY MANUAL

Step
9
To lift up the carriage to
the first latch.
L-2040D ASSEMBLY MANUAL

Step
10
To put down U shape protection hood.
L-2040D ASSEMBLY MANUAL

Step
11
To install synchronization cables.
A
C
B
E
D
L-2040D ASSEMBLY MANUAL

Step
11
To install synchronization cables.
L-2040D ASSEMBLY MANUAL

L-2040D ASSEMBLY MANUAL
Step
12
To install power unit
and link oil hoses to two cylinders.

Step
13
To install lock cable.
L-2040D ASSEMBLY MANUAL

Step
14
To install arms and crossing plate.
L-2040D ASSEMBLY MANUAL

L-2040D ASSEMBLY MANUAL
Step
15
To fix control box
and up limit switch.

L-2040D ASSEMBLY MANUAL
Step
16
To fix oil hose cover
and lock cover.