Epson PowerLite 765c Specification sheet

2Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
3If your image looks like or , you’ve placed the projector off
to one side of the screen at an angle. Place it directly in front of the
screen, facing the screen squarely.
4If your image looks like or , press the or buttons on
the projector to correct it.
Epson®PowerLite®765c
Quick Setup
1Turn On Your Equipment
1Connect the power cord to the back of the projector and plug the other
end into an electrical outlet.
2Remove the lens cover.
3Remove the battery cover on the remote control. Locate the batteries
that came with the projector and insert them as shown. Then replace
the battery cover.
4To turn the projector on, press the red Power button on the
projector or the remote control. The projector beeps once, and the
projector’s Power light flashes green and then stays on.
CAUTION: Before unplugging the projector...
Shut the projector down properly:
1. Press the Power button twice.
2. When the orange light stops flashing and the projector beeps,
you can unplug the projector.
How do you want to get images to the projector?
• To connect to a notebook, see “If connecting
to a notebook” below.
• To project over an 802.11g/b network, see
“If projecting wirelessly” on the back of this sheet.
You must have installed the projector’s EasyMPTM
software and configured your projector and
computer before you can project wirelessly.
See your User’s Guide for instructions.
• To give a presentation stored on a memory card,
see Chapter 5 in your User’s Guide.
If connecting to a notebook...
1Make sure you’ve turned on the projector and adjusted the image
as described in sections 1 and 2.
2Locate the computer cable that came with the projector. Connect
one end to the projector’s blue Computer/Component Video port.
Connect the other end to your notebook’s video-out port or
monitor port. If you can’t connect the cable to your
PowerBook®
, you may need to use an adapter. See your
PowerLite 765c User’s Guide for instructions.
3Press the Source Search button on the projector until your
computer image is displayed.
3Choose a
Presentation Method
1To raise the image, press the blue foot release button for the front
adjustable foot and lift the front. Release the button to lock the
foot in position.
2Adjust the Image
Turn over
Zoom
Focus
Computer cable
Wireless card

Once the card is inserted, the projector displays a screen like this:
4Windows: From the Start menu, select EMP NS Connection.
Macintosh OS X: Double-click the EMP NS Connection icon in your
Applications folder.
5If you see this screen, select the name and IP address for your
computer’s 802.11g or 802.11b wireless card and click OK.
You see this screen:
If the connection is working properly, you see your projector listed.
If you don’t see your projector listed, restart your computer. If it still
doesn’t appear, see the User’s Guide for help.
6Once the name of your projector appears, select it and click Connect.
If a projector is in use and is “locked” to prevent interruption, you
won’t be able to select it.
7If you see a message asking for a keyword, enter the four digits that
appear on the EasyMP Network Screen and click OK. (See the screen at
the top of this column to locate the projector keyword.)
You see the image on your monitor transmitted to the projector, and a
floating control bar appears on the computer screen:
8When you’re done with your presentation, click Disconnect on the
control bar.
Epson is a registered trademark and EasyMP is a trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered
trademarks of Epson America, Inc.
General Notice: Other product names are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks.
© 2005 Epson America, Inc. 4/05 CPD-19807
Printed in XXXXXXXXX
Click here
to minimize
Where To Get Help
Telephone Support Services
To use the Epson PrivateLine®Support service, call [phone] and
enter the PIN on the Epson PrivateLine Support card included in your
Start Here kit. This service is available 6 AM to 6 PM, Pacific Time, Monday
through Friday, for the duration of your warranty period. You may also
speak with a projector support specialist by dialing one of these numbers:
U.S.: [phone], 6 AM to 6 PM, Pacific Time, Monday through Friday
Canada: [phone], 6 AM to 6 PM, Pacific Time, Monday through Friday
Toll or long distance charges may apply.
Electronic Support Services
Epson provides assistance through electronic support services 24 hours a day
at http://support.epson.com. For tips, templates, and training for developing
successful presentations go to http://www.presentersonline.com.
4If you see a blank screen or you don’t see the image you are trying
to project from your computer, make sure the Power light on the
projector is green and not flashing, and the lens cover is off. If the
screen is still blank, restart your notebook, or press the Source Search
button on the projector again.
Windows®:Hold down the Fn button on the keyboard and press the
function key that lets you display on an external monitor. It may have
an icon such as , or it may be labeled CRT/LCD.
5If your projector and notebook don’t display the same image, do
the following:
Windows: Try using the CRT/LCD or function key, as described
above. If this doesn’t work, double-click Display in the Windows
Control Panel. Make sure both the LCD screen and monitor port are
enabled. (Allow a few seconds for the projector to sync up.) See your
Windows online help for details.
Macintosh®OS X: From the Apple menu, select System Preferences,
then click Displays. Select the VGA Display or Color LCD dialog box,
click the Arrangement (or Arrange) tab, and make sure Mirror
Displays is checked.
Macintosh OS 9 or earlier: From the Apple menu, select Control
Panels, then click Monitors or Monitors and Sound. Click the
Arrange icon, then drag one monitor icon on top of the other; this
lets you display on both the projection screen and the LCD screen.
If this option isn’t available, click the Monitor icon and select a
Simulscan resolution.
6If you see an image but it’s not displayed correctly, press the Auto
button on the remote control to automatically readjust it.
If projecting wirelessly...
Follow the steps in this section to project over an 802.11g or 802.11b
wireless network from a computer running Windows 98, 2000, Me, XP, or
Macintosh OS X 10.2.4 or above.
NOTE: You must have already installed the projector’s EasyMP (EMP NS
Connection) software and configured your projector and computer. See
the User’s Guide for instructions. Also, your computer must have an
802.11g or 802.11b network card or transmitter installed.
1Make sure you’ve turned on the projector and adjusted the image
as described in sections 1 and 2 on the front of this sheet.
2Select EasyMP as the source by
pressing the EasyMP button
on the remote control.
3Insert the Epson 802.11g card
with the label facing upward,
as shown. When fully inserted,
the end of the card will protrude.
Click here
Drag one monitor
icon onto the other
Click here
Make sure this
is checked
Select your projector
Projector keyword
(optional)
Don’t forget to register!
Fill out the registration card included in your Start Here kit and
mail it to Epson. Or register online at www.epson.com /webreg.
NOTE: Use only the Epson 802.11g card. Other brands may not be
compatible and are not guaranteed to work.