Epson ChromaBlast v1.0 User manual

ChromaBlast™ v1.0
Revision 2/2008
Getting Started Guide
For EPSON Stylus®PRO 4880

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide forthe EPSON Stylus Pro 4880
1
ChromaBlastTM
Getting Started Guide
for the
EPSON Stylus®PRO 4880
© Copyright 2008, Sawgrass Technologies, Inc., Revision February
2008. All rights reserved. Printed in the United States of America.
ChromaBlastTM, ChromaBlast™ inks, ChromaBlast Driver™, and
ColorSure™ are trademarks of Sawgrass Technologies, Inc.
Other trademarks and registered trademarks are the property of their
respective owners.
No part of this manual may be reproduced or transmitted in any form
by any means without the prior written consent of Sawgrass
Technologies, Inc. Information in this manual is subject to change
without notice and does not represent a commitment on the part of
Sawgrass Technologies, Inc.

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide for the EPSON Stylus Pro 4880
2
IMPORTANT – READ CAREFULLY:
This product is for commercial use only.
This Process License Agreement ("PLA") is a legal agreement between you and Sawgrass
Technologies, Inc. ("Sawgrass"). By installing the ChromaBlast™ cartridge in your printer, or
otherwise using the Sawgrass ChromaBlast™ink, you agree to be bound by the terms of this PLA.
If you do not agree to the terms of this PLA, Sawgrass is unwilling to license the process of using
the ChromaBlast™ ink to you. In such event, you may not use the ChromaBlast™ink, and you
should promptly contact your supplier for instructions on return of the unopened package.
The process of using ChromaBlast™ink is protected by U.S. and foreign patents. Sawgrass will
provide a complete list of the relevant patents upon request. The use of the ChromaBlast™ink to
practice the patented process is permitted by this license.
1. GRANT OF LICENSE This PLA grants you the following rights:
You may install and use the ChromaBlast™ink packaged herewith in your EPSON printer to
practice the printing process described in U.S. Patent No. 6,341,856 (“Sawgrass Process”). The
use of any ink, dye or pigment to practice the Sawgrass Process, other than a ChromaBlast™ink
purchased from Sawgrass or its authorized distributor accompanied by a PLA, is not a licensed use
of the Sawgrass Process. No rights to use the Sawgrass Process, except those specified herein,
are granted, and no rights to use any other process, product, software or hardware developed or
sold by Sawgrass are granted or implied hereby.
2. LIMITATIONS ON REVERSE ENGINEERING
You agree that you will not attempt to reverse engineer, reproduce or deformulate the
ChromaBlast™ink.
3. PATENTS AND COPYRIGHTS
Sawgrass owns multiple U.S. and foreign patents which may apply to the Sawgrass Process
and/or the use of ChromaBlast™ink. All patents in and to the method of using ChromaBlast™ink
are owned by Sawgrass Technologies, Inc. You may not copy the printed materials accompanying
the ChromaBlast™ink. All rights not specifically granted under this PLA are reserved by Sawgrass
Technologies, Inc.
Sawgrass agrees to replace any defective product, or to refund the purchase price, within a reasonable
time, which shall be Sawgrass' sole responsibility for errors or defects in the goods. THERE ARE NO
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
SAWGRASS SHALL NOT BE LIABLE FOR LOSS OF PROFIT OR OTHER ECONOMIC LOSS,
OR FOR INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER SIMILAR DAMAGES.

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide forthe EPSON Stylus Pro 4880
3
IMPORTANT – READ CAREFULLY:
This product is for commercial use only.
This Process License Agreement ("PLA") is a legal agreement between you and Sawgrass
Technologies, Inc. ("Sawgrass"). By installing the ChromaBlast™ v1.5 media in your printer, or
otherwise using the Sawgrass ChromaBlast™ v1.5 media, you agree to be bound by the terms of
this PLA. If you do not agree to the terms of this PLA, Sawgrass is unwilling to license the process
of using the ChromaBlast™ v1.5 media to you. In such event, you may not use the ChromaBlast™
v1.5 media, and you should promptly contact your supplier for instructions on return of the
unopened package.
The process of using ChromaBlast™ v1.5 media is protected by U.S. and foreign patents.
Sawgrass will provide a complete list of the relevant patents upon request. The use of the
ChromaBlast™ v1.5 media to practice the patented process is permitted by this license.
1. GRANT OF LICENSE This PLA grants you the following rights:
You may use the ChromaBlast™ v1.5 media packaged herewith with your ChromaBlast™ ink in
your Epson printer to practice the printing process described in U.S. Patent No. 6,341,856
(“Sawgrass Process”). The use of any ink, dye or pigment and media combination to practice the
Sawgrass Process, other than ChromaBlast™ ink and ChromaBlast™ v1.5 media purchased from
Sawgrass or its authorized distributor accompanied by a PLA, is not a licensed use of the
Sawgrass Process. No rights to use the Sawgrass Process, except those specified herein, are
granted, and no rights to use any other process, product, software or hardware developed or sold
by Sawgrass are granted or implied hereby.
2. LIMITATIONS ON REVERSE ENGINEERING
You agree that you will not attempt to reverse engineer, reproduce or deformulate the
ChromaBlast™ v1.5 media or ink.
3. PATENTS AND COPYRIGHTS
Sawgrass owns multiple U.S. and foreign patents which may apply to the Sawgrass Transfer
Media Process and/or the use of ChromaBlast™ v1.5 media. All patents in and to the method of
using ChromaBlast™ v1.5 media are owned by Sawgrass Technologies, Inc. You may not copy
the printed materials accompanying the ChromaBlast™ v1.5 media. All rights not specifically
granted under this PLA are reserved by Sawgrass Technologies, Inc.

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide for the EPSON Stylus Pro 4880
4
END-USER LICENSE AGREEMENT FOR
SAWGRASS SOFTWARE- ChromaBlast Driver™
IMPORTANT-READ CAREFULLY: This Sawgrass Technologies Inc. End-User License Agreement ("EULA") is a legal
agreement between you (either an individual or a single entity) and Sawgrass Technologies, Inc for the Sawgrass
software product identified above, which includes computer software and may include associated media, printed
materials, and "online" or electronic documentation ("SOFTWARE PRODUCT"). By installing, copying, or otherwise
using the SOFTWARE PRODUCT, you agree to bebound by theterms of this EULA. If you do not agree to the terms
of this EULA, do not install or use the SOFTWARE PRODUCT.
Software PRODUCT LICENSE
Copyright laws and international copyrighttreaties, as well as other intellectual property laws and treaties protect the
SOFTWARE PRODUCT. The SOFTWARE PRODUCT is licensed, not sold. The title to, and ownership of, this
SOFTWARE PRODUCT remains with Sawgrass Technologies,Inc. (Sawgrass).
GRANT OF LICENSE. This EULA grants you the following rights:
•This license is provided to you for your use according to the terms hereof. You may install and use the
SOFTWARE PRODUCT packaged herewith to practice the printing process described in U.S. Patent No.
6,341,856 (the "Sawgrass Process"). The use of any ink, dye or pigment to practice the Sawgrass Process,
other than a ChromaBlast™ ink which is purchasedfrom Sawgrass or its authorized distributor, is not alicensed
use of the SOFTWARE PRODUCT. You agree not to use the SOFTWARE PRODUCT for any other purpose
orinany processexceptas expresslypermittedhereby.
•Not for Resale. You may not sell, or otherwise transfer for value,the SOFTWARE PRODUCT.
•No Reverse Engineering, Decompilation, Copying or Disassembly. You may not reverse engineer,
decompile, copy or disassemble the SOFTWARE PRODUCT.
•No Rental. You may not rent, lease, orlend the SOFTWARE PRODUCT.
•Support Services. Sawgrass Technologies, Inc. may provide youwith support services related to the
SOFTWARE PRODUCT ("Support Services"). Use of Support Services is governed by the Sawgrass
policies and programs described in the user manual, in "online" documentation, and/or in other Sawgrass-
provided materials. Any supplemental software code provided toyou as part of the Support Services shall
be considered part of the SOFTWARE PRODUCT and subject to the terms and conditions ofthis EULA.
With respect to technical information you provide to Sawgrass as part of the Support Services, Sawgrass
may use such information for its business purposes, including for product support and development.
Sawgrass will not utilize such technical information in a form that personally identifies you.
•No Assignment or Sublicense. You may not assign or sublicense the rights grantedhereby.
•Termination. Without prejudice toany other rights, Sawgrass may terminate this EULA if you fail to
comply with the terms and conditions of this EULA. In the event of termination, you must destroy all
copies of the SOFTWARE PRODUCTand all of its component parts.
COPYRIGHT. All titleand copyrights in and to the SOFTWARE PRODUCT (including but not limited to any images,
photographs, animations, video, audio, music, text, and "applets" incorporated into the SOFTWARE PRODUCT), the
accompanying printed materials, and any copies of the SOFTWARE PRODUCT are owned by Sawgrass Technologies
Inc. or its suppliers. Copyright laws andinternational treaty provisions protect the SOFTWARE PRODUCT. Therefore,
you must treat the SOFTWARE PRODUCT like any other copyrighted material, except that you may install the

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide forthe EPSON Stylus Pro 4880
5
SOFTWARE PRODUCT on a computer forthe uses permitted hereby. You may not copy the printed materials
accompanying the SOFTWARE PRODUCT. You may not loan, rent, lease, or otherwise transferthe other medium to
another user, except as part ofthe permanent transfer (as provided above) of theSOFTWARE PRODUCT.
U.S. GOVERNMENT RESTRICTED RIGHTS. The SOFTWARE PRODUCT and documentation are providedwith
RESTRICTED RIGHTS. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or
subparagraphs (c)(1) and (2) of the Commercial Computer Software-Restricted Rights at 48 CFR 52.227-19, as
applicable.
MISCELLANEOUS
a. If you acquired thisproduct in the United States, this EULA isgoverned by the laws of the State of South Carolina.
In the event of any dispute arising under this license or from theuse of the SOFTWARE PRODUCT, each party
irrevocably agrees to the jurisdiction of theUnited States District Court for the District of South Carolina, Charleston
Division.
b. If you acquired thisproduct in Canada, this EULA is governed by the laws of theProvince of Ontario, Canada. In
the event of any dispute arising under this license or from the use of theSOFTWARE PRODUCT, each party
irrevocably agrees to the jurisdiction of the courts of the Province of Ontario andfurther agrees to commence any
litigation which may arise hereunder inthe courts located in the Judicial District of York, Province of Ontario.
c. If this product was acquired outsidethe United States, then local law may apply.
LIMITED WARRANTY. Sawgrass warrants that (a) the SOFTWARE PRODUCT will perform substantially in
accordance with the accompanying writtenmaterials for a period of thirty (30) days from the date of receipt, and (b)
any Support Services provided by Sawgrass shall be substantially as described in applicable written materialsprovided
to you by Sawgrass, and Sawgrass support engineers will make commercially reasonable efforts to solve any problem
issues. Some states and jurisdictions donot allow limitations on duration of an implied warranty, so the above limitation
may not apply to you. To theextent allowed by applicable law, implied warrantieson the SOFTWARE PRODUCT, if
any, are limited to thirty (30) days.
CUSTOMER REMEDIES. Sawgrass' and its suppliers' entireliability and your exclusive remedy shall be, at Sawgrass'
option, either (a) return ofthe price paid, if any, or (b) repairor replacement of the SOFTWARE PRODUCT that does
not meet Sawgrass' Limited Warranty and which is returned to Sawgrass with a copy ofyour receipt. This Limited
Warranty is void if failure ofthe SOFTWARE PRODUCT has resulted from accident, abuse, or misapplication. Any
replacement SOFTWARE PRODUCT will be warrantedfor the remainder of the original warranty period or thirty (30)
days, whichever is longer. Outsidethe United States, neither these remedies nor any product support services offered
by Sawgrass are available without proof of purchase from an authorized international source.
NO OTHER WARRANTIES. To the maximum extent permitted by applicable law, Sawgrass and its suppliers disclaim
all other warranties and conditions, either express or implied, including, but not limited to, impliedwarranties of
merchantability, fitness for aparticular purpose, title, and non-infringement, with regard to the SOFTWARE PRODUCT,
and the provision of or failure to provide Support Services. This limited warranty gives you specific legal rights. You
may have others, which vary from state/jurisdiction to state/jurisdiction.
LIMITATION OF LIABILITY. To the maximum extent permitted byapplicable law, in no event shall Sawgrass or its
suppliers be liable forany special, incidental, indirect, or consequential damages whatsoever (including, without
limitation, damages for loss of business profits, business interruption, loss of business information, or any other
pecuniary loss) arising out of the use ofor inability to use the SOFTWARE PRODUCT or the provision of or failure to
provide Support Services, even if Sawgrass has been advised of the possibilityof such damages. In any case,
Sawgrass' entire liability under any provision of this EULA shall be limitedto U.S. $5.00. Because some states and
jurisdictions do not allow theexclusion or limitation of liability, the above limitation may not apply to you.
ChromaBlast™ink, ChromaBlast™ v1.5 media, ChromaBlast Driver™ v1.5, and Color Sure™ are
trademarks of
Sawgrass Technologies, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Sawgrass Technologies, Inc. disclaims any and all rights in
those marks.

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide for the EPSON Stylus Pro 4880
6
Table of Contents
Table of Contents .............................................................................................................................6
Introduction.......................................................................................................................................7
About this Document.......................................................................................................................8
Installing ChromaBlast™Cartridges...............................................................................................9
Printing and Heat Transfer Instructions.......................................................................................15
ChromaBlast Driver™ Introduction..............................................................................................17
System Requirements....................................................................................................................17
Setup Instructions – Windows XP / Vista.....................................................................................18
Using ChromaBlast Driver™ in Windows XP / Vista...................................................................23
Appendix A: Network Printing in Windows XP / Vista................................................................29
Host Machine (Server)....................................................................................................................29
Appendix B: Defeating Application Color Management.............................................................30
Appendix C: Using ColorSure™ and Custom Palette.................................................................33
Supplies & Equipment ...................................................................................................................40
Operating Conditions.....................................................................................................................40
Ink Storage......................................................................................................................................40
Media Storage.................................................................................................................................40
Troubleshooting .............................................................................................................................41
Technical Support..........................................................................................................................44
Project Cotton.................................................................................................................................44

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide forthe EPSON Stylus Pro 4880
7
Introduction
Welcome to Sawgrass Technologies, Inc. and ChromaBlast™. We are excited to
offer a total cotton solution for your business. We look forward to working with
you and to a continued partnership in digital imaging.
The ChromaBlast™ Getting Started Guide contains information for using
ChromaBlast™ inks and ChromaBlast media, along with helpful tips for getting
the best printing results possible. The information provided pertains only to the
use of ChromaBlast™ inks in your printer.
ChromaBlast 4880 Driver v1.0 is included with the ChromaBlast™ system.
Developed by Sawgrass Technologies, the ChromaBlast Driver™ is user-friendly
software that enables you to maximize output quality and quantity. Please refer
to the detailed instructions provided in this manual or on your ChromaBlast
Driver™ CD to customize each print.
Technical support is available from your Authorized ChromaBlast™ reseller or
directly from Sawgrass Technologies, Inc. See the section entitled Technical
Support for additional information. Please feel free to contact us with your
feedback about our products. For additional information on ChromaBlast™ inks,
ChromaBlast™ v1.5 media, or our other products, visit our web site at
www.sawgrassink.com. Thank you and enjoy ChromaBlast™.

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide for the EPSON Stylus Pro 4880
8
About this Document
This document contains descriptions and procedures for using
ChromaBlast™ inks, along with additional information on setting up your
EPSON Stylus PRO 4880 printer and for getting the best results from
use of this system.
The documentation provided pertains only to the use of ChromaBlast™
inks in your EPSON Stylus PRO 4880 ink jet printer. To assist you in the
overall setup process, references are made back to the EPSON Stylus
PRO 4880 Printer Basics Guide for instructions.
To help point out important information, specific instructions, and
helpful tips, look for the following symbols:
Indicates Must-Do items, including
warnings and important guidelines. These
must be followed to prevent damage to
y
our
p
rinter.
Indicates useful tips for printing
and sublimation.

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide forthe EPSON Stylus Pro 4880
9
Installing ChromaBlast™Cartridges
If you are replacing existing cartridges because they are empty or low,
please see the following instructions. If not, go directly to step #1
When a cartridge is empty or low, INK LOW or REPLACE INK OUT will display on
the LCD panel. Raise, then lower the ink levers on either side of the printer. The
ink indicator on the LCD panel will flash, indicating which cartridge is low or
empty. Be sure you have the correct color cartridge for replacement.
cartridge for replacement.
NOTE: The LCD Panel will indicate the ink colors of the original OEM ink
configuration and not the ChromaBlast ink configuration
Do not install the Epson Inks provided with the
printer. Please call Sawgrass Technical Support if
you need assistance installing the ChromaBlast™
inks.

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide for the EPSON Stylus Pro 4880
10
1. Ensure the printer power is on. Press the ink compartment cover to
release the latch and open the cover.
2. Raise the ink lever to the unlocked position.
The ink lever is located to the right of each ink
compartment. If you are installing a complete
set of ink cartridges, then install using the
following order starting from left to right:
Black (CB), Cyan (CB), Magenta (CB),
Yellow (CB), Black (CB), Cyan (CB),
Magenta (CB) and Yellow (CB).
Note: The cartridge label should be facing left as the cartridge is inserted
into it’s slot.
Continue to step 5 below.
If you are just replacing an empty cartridge, then continue to step 3 and 4
below.
3. Remove the empty ink cartridge from the
printer.

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide forthe EPSON Stylus Pro 4880
11
4. Remove the replacement ink
cartridge from its packaging and insert it
into the slot with the label facing left. Do
not force the cartridge into the slot.
5. Lower the ink lever to the locked
position.
6. Close the ink compartment cover if you have standard size ink
cartridges installed. After all eight cartridges are installed, lower the ink
levers. The printer will begin charging the ink-delivery system.
If the cartridge does not insert smoothly into
the slot, double check to make sure you
have the correct cartridge installed in the
correct slot. If the ink light remains on after
installing the cartridge, remove the cartridge
and reinsert to ensure it was fully placed in
the slot.

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide for the EPSON Stylus Pro 4880
12
7. After approximately 1 minute, the ink leer messages will appear on the
LCD panel. The LCD will indicate that the printer recognized “NON-
GENUINE” ink cartridges.
8. Press the down key (V) until a message appears that asks the user
whether the ink cartridges are “NON-GENUINE”.
9. Press the left key (<) to acknowledge that the cartridges are “NON-
GENUINE”.
10. Press the left key (<) until the following message appears:

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide forthe EPSON Stylus Pro 4880
13
11. Press the down key (V) until the following message appears:
12. Press the left key (<) to accept acknowledgement of the warranty
message.
13. The following messages will appear:

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide for the EPSON Stylus Pro 4880
14
14. Press the PAUSE key once.
15. The following message will appear. The printer is now ready for use.
Channel
Configuration 1 2 3 4 5 6 7 8
OEM Matte K C M Y LK Lc Lm LLk
ChromaBlast™ K C M Y K C M Y
Tip:
Perform a nozzle check from The
ChromaBlast 4880 Driver™ v1.0. A few
cleanings may be necessary to get a good
nozzle check.
If the cartridge does not insert smoothly into
the slot, double check to make sure you
have the correct cartridge installed in the
correct slot. If the ink light remains on after
installing the cartridge, remove the cartridge
and reinsert to ensure it was fully placed in
the slot.

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide forthe EPSON Stylus Pro 4880
15
Printing and Heat Transfer Instructions
RECOMMENDED APPLICATIONS
White or light colored fabrics in 100% cotton.
PRINTING
Print using the supplied ChromaBlast 4880 Driver v1.0 program only.
The print side of ChromaBlast media is opposite the ChromaBlast logo.
For the Epson 4880 place print side face up in the printer tray.
Mirror Image: Check this box in the ChromaBlast Driver to ensure the image
prints in reverse and that text appears correctly when image is transferred. If
your image is already reversed in your graphic program, leave this box
unchecked.
TRANSFERRING THE IMAGE USING A COMMERCIAL HEAT PRESS
1. If desired, you may trim the non-printed area before transferring,
leaving .25 in. margin around the printed area.
2. Place garment on the heat press. Cover with ChromaBlast paper
with image face down.
3. Press image according to proper pressure, heat, and time settings.
4. Peel the paper off the shirt while the shirt is still hot using an even
motion.
5. Stretch the image area while the shirt is hot from both left to right
and top to bottom to reduce the hand.
HEAT PRESS SETTINGS
Pressure: Heavy. If using a pneumatic press, set the pressure to 60 psi.
Temperature: 375°F - 400°F (190°C - 205°C)
Time: 40 seconds. If you press the garment at a temperature higher
than 375°F, reduce the transfer time to prevent scorching.
In order for the ChromaBlast Ink and Media to bond to the cotton fibers it
is critical that the heat press settings above be used to achieve the best
possible results.
STORAGE INSTRUCTIONS
Store ChromaBlast media in a cool, dry area within the provided plastic
storage bag. Do not remove from carton until ready to use.

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide for the EPSON Stylus Pro 4880
16
Revision 2/2008
ChromaBlast Driver™
User Guide
For Epson Stylus®PRO 4880
For distribution with ChromaBlast™ Media
v1.5 only
NOT FOR RESALE

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide forthe EPSON Stylus Pro 4880
17
ChromaBlast 4880 Driver™ v1.0 Introduction
Obtaining the benefits of the ChromaBlast 4880 Driver™ v1.0 color
management is now incredibly easy - simply print from your application
with the ChromaBlast 4880 Driver™ v1.0 rather than the Epson printer
driver. The ChromaBlast 4880 Driver™ v1.0 prints your image just like
the Epson printer driver except for the colors. Watch how it magically
makes ChromaBlast™ink colors picture perfect!
The ChromaBlast 4880 Driver™ v1.0 delivers both convenience and the
highest quality ChromaBlast™ color management technology. The
innovation demonstrated by the ChromaBlast 4880 Driver™ v1.0 is the
result of our dedication to you, our customers. At Sawgrass
Technologies, we are focused on delivering the highest quality digital
transfer technology available. We fully expect that you will be “wowed” by
the results you obtain with ChromaBlast™ ink and the ChromaBlast 4880
Driver™ v1.0.
The ChromaBlast 4880 Driver™ v1.0 runs under Windows XP and Vista.
System Requirements
Minimum Hardware:
Pentium 4 – 3.0GHz or Athlon XP 3000+ Processor
1 GB System Memory (2 GB System Memory is recommended)

Sawgrass Technologies, Inc. ChromaBlast™Getting Started Guide for the EPSON Stylus Pro 4880
18
Setup Instructions – Windows XP / Vista
Product Overview
The ChromaBlast 4880 Driver™ v1.0 is color management software that
has been written as a Windows printer driver. It is designed to work with
Epson ink-jet printers and Sawgrass ChromaBlast™ ink. The installation
program will install Sawgrass color management software, the Sawgrass
ChromaBlast™ printer driver software, and ColorSure tools and utilities.
Quick Start
1. Unpack and setup printer as described in the Epson manual.
2. Install the Epson printer driver and verify printer operation.
3. Insert the ChromaBlast 4880 Driver™ v1.0 CD into the CD-ROM
drive on the computer and install the ChromaBlast 4880 Driver™
v1.0.
Step By Step Installation
To get started printing as soon as possible, these are the steps
Sawgrass recommends you perform while setting up your sublimation
printer driver software.
1. Setup the printer according to the Epson instructions.
2. Install the ChromaBlast inks.
3. Install the Epson printer driver. According to the Epson user’s
manual.
4. After the Epson driver is installed, check to see which port the
printer is set to:
a. In XP you can do this by clicking on Start, Printers and Faxes.
For XP with the Classic menu enabled, click Start, Settings,
Printers.
b. Right click on the Epson printer you just installed and click on
the Properties option.
c. Select the Ports tab and write down the port the printer is
assigned to. You will use this later in the ChromaBlast 4880
Driver™ v1.0 software installation.
5. Insert the ChromaBlast 4880 Driver™ v1.0 CD into your CD-
ROM drive. The installation is self-starting. However, if the
installation does not begin then Click Start, Run. Browse to
your CD-ROM drive and click on PDNTM4880.exe.