Equinox Systems Fusion 120 Zoom User manual

Order code: EQLED068
Fusion 120 Zoom
User Manual

www.prolight.co.uk Fusion 120 Zoom User Manual 2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary
fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand
thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithother
cables.Handlethepowercableandallmainsvoltage
connectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,
asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhen
equipmentisnotinuseorbeforecleaning!Onlyhandle
thepower-cablebytheplug.Neverpullouttheplugby
pullingthepower-cable.
• Makesurethattheavailablemainssupplyvoltageis
between100~240VAC,50/60Hz.
• Makesurethatthepowercableisnevercrimpedor
damaged.Checktheequipmentandthepowercable
periodically.
• Iftheequipmentisdroppedordamaged,disconnectthe
mainspowersupplyimmediatelyandhaveaqualied
engineerinspecttheequipmentbeforeoperatingagain.

• Iftheequipmenthasbeenexposedtodrastic
temperatureuctuation(e.g.aftertransportation),
donotconnectpowerorswitchitonimmediately.
Thearisingcondensationmightdamagetheequipment.
Leavetheequipmentswitchedoffuntilithasreached
roomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuse
immediately.Packtheunitsecurely(preferablyinthe
originalpackingmaterial),andreturnittoyourProLight
dealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybe
carriedoutbyaqualiedtechnician.THISUNITCONTAINS
NOUSERSERVICEABLEPARTS.
• Thislightingxtureisforprofessionaluseonly-itis
notdesignedfororsuitableforhouseholduse.The
productmustbeinstalledbyaqualiedtechnicianin
accordancewithlocalterritoryregulations.Thesafetyof
theinstallationistheresponsibilityoftheinstaller.The
xturepresentsrisksofsevereinjuryordeathduetore
hazards,electricshockandfalls.
• Warning!RiskGroup2LEDproductaccordingto
EN62471.Donotviewthelightoutputwithoptical
instrumentsoranydevicethatmayconcentratethebeam.
• WARRANTY:Oneyearfromdateofpurchase.

www.prolight.co.uk Fusion 120 Zoom User Manual 3
Product overview & technical specications
TheEquinoxFusion120Zoomisa7x12WLEDMovingHeadwith
motorisedzoomallowingforavariablebeamanglefrom6°-45°.
Thextureispoweredby7x12WRGBWquad-colourLEDs.Withits
quickspeedandbuilt-inlightshows,thexturebringspurelighting
stunninghuesandcolourwashestoanyvenue.Withaforwardfacing
showthisxtureisidealformobileDJs.
•7x12Wquad-colourLEDs
•Adjustablebeamangle:6°-45°
•7541Lux@2m(fullon)
•Motorisedzoom
•DMXchannels:8or16selectable
•Auto,soundactiveand
master/slavemodes
•Pan:540°,Tilt:190°
•0-100%dimming
andvariablestrobe
•Suppliedwithhangingbracket
•4pushbuttonmenu
withLEDdisplay
•IECpowerinput
•3-PinXLRinput/output
•Fancooled
Fusion 120 Zoom
Specications
Powerconsumption 90W
Powersupply 100~240V,50/60Hz
Fuse F2A250V
Dimensions 300x198x146mm
Weight 4kg
Ordercode EQLED068
300mm
198mm 146mm
0m 1m 2m 3m 4m 5m
45°
6°
45° - Lux
FULL ON
R
G
B
W
1121
165
408
51.6
552
4480
660
1630
206
2210
498
73.3
181
22.9
245
280
41.3
102
12.9
138
179
26.4
65.3
8.26
88.3
6° - Lux
FULL ON
R
G
B
W
7541
1080
2889
384
3621
30200
4320
11600
1540
14500
3350
480
1280
171
1610
1890
270
723
96
905
1210
173
462
61.4
579

www.prolight.co.uk Fusion 120 Zoom User Manual 4
Technical specications
MENU
MIC
DOWN UP ENTER DMX INPUT DMX OUTPUT
POWER INPUT:
100-240V~50/60Hz
FUSE: F2A
www.prolight.co.uk
03
02 01 04 05 07 06 08
01-LEDdisplay
02-Functionbuttons
03-Microphone
04-DMXinputsocket
05-DMXoutputsocket
06-IECpowerinputsocket
07-FuseF2A250V
08-Fan
Inthebox:1 x xture,
1 x power cable,
1 x hanging bracket,
1 x eye bolt &
1 x user manual

www.prolight.co.uk Fusion 120 Zoom User Manual 5
Operating instructionsOperating instructions
MENU
A 0 0 1
A 5 1 2
A 0 0 1
DMX address setting
8Ch
16Ch
C H N d
Channel modes
N A s t
S L 1
SLNd
Master/slave mode
H I s P
L o S P
S P N d
Pan/tilt speed setting
S H 1
S H 4
SHNd
Show modes
o n
oFF
S o u n
Sound mode on/off
o n
o F F
PAn
Pan invert
o n
oFF
t I L
Tilt invert
o n
oFF
d I S P
Display invert
000
100
N I C
Sound sensitivity
o n
oFF
r F A C
Reset factory settings
d E L E
P
t
F
0 0 0
1 2 0
0 0 0
1 2 0
0 0 0
1 2 0
r S t
Motor reset
A d t
Home position setting

www.prolight.co.uk Fusion 120 Zoom User Manual 6
Operating instructions
DMX mode:
OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes
tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitof
thextureandeachxtureindependently.
ToaccesstheDMXaddressmode,pressthe“MENU”buttononthefrontoftheunittoshow
A001ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”
buttonstosettherequiredDMXaddress.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
DMX channel mode:
ToaccesstheDMXchannelmode,pressthe“UP”buttononthefrontoftheunittoshowCHNd
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
oneofthe8or16DMXchannelmodes.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
PLEASE NOTE:WhentheunitisreceivingDMXtherstreddotonthedisplaywillash.
8 channel mode:
Channel Value Function
CH1 000-255 Panadjustment0-540°
CH2 000-255 Tiltadjustment0-190°
CH3 000-255 Zoomadjustment
CH4 000-255 Masterdimmer(0-100%)
CH5 000-255 Red(0-100%)
CH6 000-255 Green(0-100%)
CH7 000-255 Blue(0-100%)
CH8 000-255 White(0-100%)

www.prolight.co.uk Fusion 120 Zoom User Manual 7
Operating instructions
16 channel mode:
Channel Value Function
CH1 000-255 Panadjustment0-540°
CH2 000-255 Panneadjustment
CH3 000-255 Tiltadjustment0-190°
CH4 000-255 Tiltneadjustment
CH5 000-255 Pan/tiltspeed
CH6 000-255 Masterdimmer(0-100%)
CH7
000-009 Blackout
010-245 Strobe(slow-fast)
246-255 LEDon
CH8 000-255 Red(0-100%)
CH9 000-255 Green(0-100%)
CH10 000-255 Blue(0-100%)
CH11 000-255 White(0-100%)
CH12 000-255 Colourtemperature
CH13
000-010 Blackout
011-020 R
021-030 G
031-040 B
041-050 W
051-060 R+G
061-070 G+B
071-080 B+W
081-090 R+B
091-100 G+W
101-110 R+W
111-120 R+G+B
121-130 R+G+W
131-140 G+B+W
141-150 R+G+B+W
151-255 Colourchange(slow-fast)
CH14 000-010 Nofunction
011-255 Fade(slow-fast)
CH15
000-020 Nofunction
021-060 Program1
061-100 Program2
101-140 Program3
141-180 Program4
181-200 Nofunction
201-225 Motorreset
226-255 Nofunction
CH16 000-255 Zoomadjustment

www.prolight.co.uk Fusion 120 Zoom User Manual 8
Pan/tilt speed setting:
Toaccessthepan/tiltspeedsetting,pressthe“UP”buttononthefrontoftheunittoshowSPNd
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
betweenHISP(fast)orLoSP(slow).Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Master/slave mode:
Tosetthemasterunit,pressthe“UP”buttononthefrontofthemasterunittoshowSLNd ontheLED
display.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseNast.Press
the“ENTER”buttontoconrmthesetting.Thenselectyourdesiredprogram(soundactiveoroneofthe
showmodes).
Tosettheotherunitsinslavemode,pressthe“UP”buttononthefrontoftheunittoshowSLNd
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
eitherSL 1.Pressthe“ENTER”buttontoconrmthesetting.Theunitwillnowruninsequencewith
themasterunit.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.
Show mode:
Toaccesstheshowmodes,pressthe“UP”buttononthefrontoftheunittoshowShNd
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
betweenSH 1~SH 4.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
SH 1 – full show
SH 2 – slow show 1
SH 3 – slow show 2
SH 4 – forward facing show
Sound/sound sensitivity:
Toturnthesoundmodeonoroff,pressthe“UP”buttononthefrontoftheunittoshowSounonthe
LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetween
onor oFF.Pressthe“ENTER”buttontoconrmthesetting.
Toadjustthesoundsensitivity,pressthe“UP”buttononthefrontoftheunittoshowNIC onthe
LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetween
000~100.Value: 000 - 100 (000 = low, 100 = high)
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.



Operating instructions

www.prolight.co.uk Fusion 120 Zoom User Manual 9
Operating instructions
Pan invert setting:
Toaccessthepaninvertsetting,pressthe“UP”buttononthefrontoftheunittoshowPAn
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
betweenonoroff.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Tilt invert setting:
Toaccessthetiltinvertsetting,pressthe“UP”buttononthefrontoftheunittoshowtIL
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
betweenonoroff.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Display invert setting:
Toaccessthedisplayinvertsetting,pressthe“UP”buttononthefrontoftheunittoshowdISP
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
betweenonoroff.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Reset factory settings:
Toresettheunitsfactorysettings,pressthe“UP”buttononthefrontoftheunittoshowrFAC
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
betweenon(reset)orofF.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Pan/Tilt/Zoom home position:
Toaccessthepan/tilt/focushomepositionsetting,pressthe“UP”buttononthefrontoftheunitto
showAd tontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”
buttonstoselectdELE(defaulthomeposition),P(panhomeposition),
t(tilthomeposition)andF(Zoomhomeposition).
WhenondELE,pressthe“ENTER”buttonandtheunitshomepositionswillberesettothefactory
default(000).
WhenonP,torF,pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoadjustthe
valuebetween000~120.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Motor reset:
Toresetthemotors,pressthe“UP”buttononthefrontoftheunittoshowrStontheLEDdisplay.
Pressthe“ENTER”buttontoperformthereset.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

www.prolight.co.uk Fusion 120 Zoom User Manual 10
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”
from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel
indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas
addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105
and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe
chainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent
xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.
DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”
XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether
andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.
ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest
cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe
DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein
aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda
DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,
nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.
YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,
seeimagebelow.
Also remember that DMX cable must be daisy chained and cannot be split.
DMX setup
FurtherDMXcablescanbe
purchasedfromallgoodsound
andlightingsuppliersor
ProLightConceptsdealers.
Pleasequote:
CABL10 – 2m
CABL11 – 5m
CABL12 – 10m

www.prolight.co.uk Fusion 120 Zoom User Manual 11
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables
shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs
outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,
youmayneedtouseaterminatoron
thelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease
the possibilities of erratic behaviour.
(3-pin - Order ref: CABL9O, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures
maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa
3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmission
problemsandinterferance.itisalways
advisabletoconnectaDMXterminal,
(resistance120Ohm1/4W)betweenpin2
(DMX-)andpin3(DMX+)ofthelastxture.
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
DMX setup

www.prolight.co.uk Fusion 120 Zoom User Manual 12
WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof
withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe
environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother
typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir
localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally
saferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe
purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.