ERGOMART PM90 User manual

D.
D.
D.
D.
To keep the A96 secure, use a 3/32 Allen Wrench (F) to
tighten the set screw.
If VESA plate is pre-assembled skip to step #5.
A.
B.
E.E.
E.
E.
F.
PM90 LCD POLE MOUNT
Installation Instructions
www.ergomart.com | 888 420 3200
Ergonomic solutions for office and light industrial work environments
©2015 Ergomart. All rights reserved.
1 2
3 4

6
To keep the tilterhead secure use a 3/32” Allen Wrench
to tighten the set screw.
2
5 6
7 8
E.
E.
E.
E.
PM90 LCD POLE MOUNT
Installation Instructions
www.ergomart.com | 888 420 3200
Ergonomic solutions for office and light industrial work environments
©2015 Ergomart. All rights reserved.

Hardware Included
Tools Needed
Phillips Head Screwdriver
A. PM 90 1
A. Monitor Tilter 1
A. 100mm VESA Adapter Plate 1
A. 10/32x3/8” Phillips Flat Head Screw 1
(contained within pre-assembled VESA plates)
A. M4-12 Phillips Pan Head Screw 1
A. 3/16" Allen Wrench 1
PM90 LCD POLE MOUNT
Parts List
www.ergomart.com | 888 420 3200
ITEM DESCRIPTION / PART NO. QUANTITY
Ergonomic solutions for office and light industrial work environments
©2015 Ergomart. All rights reserved.